mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
3af779eb17
This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12. This work mainly covers: * Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family,and the Armada family. * Further updates to the mvebu MBus. * Work and ground work for enabling MSI on the Armada family. * some phy / mdio bus initialization related work. * Device tree binding documentation update. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> SVN-Revision: 39565
65 lines
2.9 KiB
Diff
65 lines
2.9 KiB
Diff
From 4aa571afd29f88898ef2fb954effcf53fec3264e Mon Sep 17 00:00:00 2001
|
|
From: Huang Shijie <b32955@freescale.com>
|
|
Date: Fri, 17 May 2013 11:17:25 +0800
|
|
Subject: [PATCH 090/203] mtd: add datasheet's ECC information to nand_chip{}
|
|
|
|
1.) Why add the ECC information to the nand_chip{} ?
|
|
Each nand chip has its requirement for the ECC correctability, such as
|
|
"4bit ECC for each 512Byte" or "40bit ECC for each 1024Byte".
|
|
This ECC info is very important to the nand controller, such as gpmi.
|
|
|
|
Take the Micron MT29F64G08CBABA for example, its geometry is
|
|
8KiB page size, 744 bytes oob size and it requires 40bit ECC per 1KiB.
|
|
If we do not provide the ECC info to the gpmi nand driver, it has to
|
|
calculate the ECC correctability itself. The gpmi driver will gets the 56bit
|
|
ECC for per 1KiB which is beyond its BCH's 40bit ecc capibility.
|
|
The gpmi will quits in this case. But in actually, the gpmi can supports
|
|
this nand chip if it can get the right ECC info.
|
|
|
|
2.) about the new fields.
|
|
The @ecc_strength_ds stands for the ecc bits needed within the @ecc_step_ds.
|
|
The two fields should be set from the nand chip's datasheets.
|
|
|
|
For example:
|
|
"4bit ECC for each 512Byte" could be:
|
|
@ecc_strength_ds = 4, @ecc_step_ds = 512.
|
|
"40bit ECC for each 1024Byte" could be:
|
|
@ecc_strength_ds = 40, @ecc_step_ds = 1024.
|
|
|
|
3.) Why do not re-use the @strength and @size in the nand_ecc_ctrl{}?
|
|
The @strength and @size in nand_ecc_ctrl{} is used by the nand controller
|
|
driver, while the @ecc_strength_ds and @ecc_step_ds are get from the datasheet.
|
|
|
|
Signed-off-by: Huang Shijie <b32955@freescale.com>
|
|
Reviewed-and-tested-by: Brian Norris <computersforpeace@gmail.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
---
|
|
include/linux/mtd/nand.h | 8 ++++++++
|
|
1 file changed, 8 insertions(+)
|
|
|
|
--- a/include/linux/mtd/nand.h
|
|
+++ b/include/linux/mtd/nand.h
|
|
@@ -434,6 +434,12 @@ struct nand_buffers {
|
|
* bad block marker position; i.e., BBM == 11110111b is
|
|
* not bad when badblockbits == 7
|
|
* @cellinfo: [INTERN] MLC/multichip data from chip ident
|
|
+ * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet.
|
|
+ * Minimum amount of bit errors per @ecc_step_ds guaranteed
|
|
+ * to be correctable. If unknown, set to zero.
|
|
+ * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
|
|
+ * also from the datasheet. It is the recommended ECC step
|
|
+ * size, if known; if unknown, set to zero.
|
|
* @numchips: [INTERN] number of physical chips
|
|
* @chipsize: [INTERN] the size of one chip for multichip arrays
|
|
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
|
|
@@ -510,6 +516,8 @@ struct nand_chip {
|
|
unsigned int pagebuf_bitflips;
|
|
int subpagesize;
|
|
uint8_t cellinfo;
|
|
+ uint16_t ecc_strength_ds;
|
|
+ uint16_t ecc_step_ds;
|
|
int badblockpos;
|
|
int badblockbits;
|
|
|