openwrt/target/linux/ramips/dts/mt7628an_comfast_cf-wr617ac.dts
Shiji Yang 58502650e1
ramips: convert the remaining mtd-mac-address to NVMEM format
`mtd-mac-address` has been abandoned. Therefore, convert them to
NVMEM format. This patch also removes some useless mtd-mac-address
properties.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:22 +02:00

127 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "comfast,cf-wr617ac", "mediatek,mt7628an-soc";
model = "Comfast CF-WR617AC";
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_status_blue: status_blue {
label = "blue:status";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
led_status_red: status_red {
label = "red:status";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
};
aliases {
led-boot = &led_status_red;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_red;
};
chosen {
bootargs = "console=ttyS0,115200";
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x40000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
macaddr_factory_8004: macaddr@8004 {
reg = <0x8004 0x6>;
};
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x760000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&macaddr_factory_8004>;
nvmem-cell-names = "mac-address";
mac-address-increment = <2>;
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
&esw {
mediatek,portmap = <0x2f>;
};
&wmac {
status = "okay";
mediatek,mtd-eeprom = <&factory 0x0>;
};