mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-31 16:35:44 +00:00
5832e754fb
With the BRCM47xx image I have built (Linksys E3000), there are additional writes following the completion of "mtd_replace_jffs2" which invalidate the 'trx_fixup' performed by 'mtd_replace_jffs2'. Moving the 'trx_fixup' to somewhere after all writes have completed fixes the problem. I also noticed that 'erasesize' used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by 'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this. Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at offset 0; which may be the cause of the problem described in Ticket #8960. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 32866
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org