mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
304423a4ff
Add patches:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch
Remove upstreamed:
- 170-DPP-fix-memleak-of-intro.peer_key.patch
- 461-driver_nl80211-use-new-parameters-during-ibss-join.patch
- 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch
- 992-openssl-include-rsa.patch
Automatically refreshed:
- 011-mesh-use-deterministic-channel-on-channel-switch.patch
- 021-fix-sta-add-after-previous-connection.patch
- 022-hostapd-fix-use-of-uninitialized-stack-variables.patch
- 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 050-build_fix.patch
- 110-mbedtls-TLS-crypto-option-initial-port.patch
- 120-mbedtls-fips186_2_prf.patch
- 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
- 150-add-NULL-checks-encountered-during-tests-hwsim.patch
- 160-dpp_pkex-EC-point-mul-w-value-prime.patch
- 200-multicall.patch
- 300-noscan.patch
- 310-rescan_immediately.patch
- 330-nl80211_fix_set_freq.patch
- 341-mesh-ctrl-iface-channel-switch.patch
- 360-ctrl_iface_reload.patch
- 381-hostapd_cli_UNKNOWN-COMMAND.patch
- 390-wpa_ie_cap_workaround.patch
- 410-limit_debug_messages.patch
- 420-indicate-features.patch
- 430-hostapd_cli_ifdef.patch
- 450-scan_wait.patch
- 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch
- 463-add-mcast_rate-to-11s.patch
- 465-hostapd-config-support-random-BSS-color.patch
- 500-lto-jobserver-support.patch
- 590-rrm-wnm-statistics.patch
- 710-vlan_no_bridge.patch
- 720-iface_max_num_sta.patch
- 730-ft_iface.patch
- 750-qos_map_set_without_interworking.patch
- 751-qos_map_ignore_when_unsupported.patch
- 760-dynamic_own_ip.patch
- 761-shared_das_port.patch
- 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch
Manually refresh:
- 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
- 301-mesh-noscan.patch
- 340-reload_freq_change.patch
- 350-nl80211_del_beacon_bss.patch
- 370-ap_sta_support.patch
- 380-disable_ctrl_iface_mib.patch
- 464-fix-mesh-obss-check.patch
- 470-survey_data_fallback.patch
- 600-ubus_support.patch
- 700-wifi-reload.patch
- 711-wds_bridge_force.patch
- 740-snoop_iface.patch
Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx),
EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK]
Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic]
Signed-off-by: Nick Hainke <vincent@systemli.org>
27 lines
1.4 KiB
Diff
27 lines
1.4 KiB
Diff
--- a/src/ap/ieee802_11.c
|
|
+++ b/src/ap/ieee802_11.c
|
|
@@ -4168,6 +4168,13 @@ static int add_associated_sta(struct hos
|
|
* drivers to accept the STA parameter configuration. Since this is
|
|
* after a new FT-over-DS exchange, a new TK has been derived, so key
|
|
* reinstallation is not a concern for this case.
|
|
+ *
|
|
+ * If the STA was associated and authorized earlier, but came for a new
|
|
+ * connection (!added_unassoc + !reassoc), remove the existing STA entry
|
|
+ * so that it can be re-added. This case is rarely seen when the AP could
|
|
+ * not receive the deauth/disassoc frame from the STA. And the STA comes
|
|
+ * back with new connection within a short period or before the inactive
|
|
+ * STA entry is removed from the list.
|
|
*/
|
|
wpa_printf(MSG_DEBUG, "Add associated STA " MACSTR
|
|
" (added_unassoc=%d auth_alg=%u ft_over_ds=%u reassoc=%d authorized=%d ft_tk=%d fils_tk=%d)",
|
|
@@ -4181,7 +4188,8 @@ static int add_associated_sta(struct hos
|
|
(!(sta->flags & WLAN_STA_AUTHORIZED) ||
|
|
(reassoc && sta->ft_over_ds && sta->auth_alg == WLAN_AUTH_FT) ||
|
|
(!wpa_auth_sta_ft_tk_already_set(sta->wpa_sm) &&
|
|
- !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)))) {
|
|
+ !wpa_auth_sta_fils_tk_already_set(sta->wpa_sm)) ||
|
|
+ (!reassoc && (sta->flags & WLAN_STA_AUTHORIZED)))) {
|
|
hostapd_drv_sta_remove(hapd, sta->addr);
|
|
wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED);
|
|
set = 0;
|