mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
d1f1e5269e
This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD), an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet port. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 256 MB - Storage: 16 MB NOR - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in - 1x Ethernet LED (green) - 7x user-controllable LEDs · 1x power (blue) · 1x user (green) · 5x rssi (green) Note: Serial UART is probably available on the board, but it has not been tested. Flashing: Boot via TFTP the initramfs image. Then, upload a sysupgrade image via SSH and flash it normally. More info at the "Common procedures for MikroTik products" page https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> |
||
---|---|---|
.. | ||
board-8dev_habanero-dvk.qca4019 | ||
board-aruba_ap-303.qca4019 | ||
board-avm_fritzrepeater-1200.qca4019 | ||
board-buffalo_wtr-m2133hp.qca4019 | ||
board-buffalo_wtr-m2133hp.qca9984 | ||
board-cellc_rtl30vw.qca4019 | ||
board-devolo_magic-2-wifi-next.qca4019 | ||
board-dlink_dap2610.qca4019 | ||
board-edgecore_ecw5410.qca9984 | ||
board-edgecore_oap100.qca4019 | ||
board-engenius_eap2200.qca4019 | ||
board-engenius_eap2200.qca9888 | ||
board-engenius_emd1.qca4019 | ||
board-engenius_emr3500.qca4019 | ||
board-ezviz_cs-w3-wd1200g-eup.qca4019 | ||
board-glinet_gl-ap1300.qca4019 | ||
board-glinet_gl-s1300.qca4019 | ||
board-linksys_ea8300.qca4019 | ||
board-linksys_ea8300.qca9888 | ||
board-linksys_mr8300-v0.qca4019 | ||
board-linksys_mr8300-v0.qca9888 | ||
board-luma_wrtq-329acn.qca4019 | ||
board-mikrotik_hap-ac2.qca4019 | ||
board-mikrotik_sxtsq-5-ac.qca4019 | ||
board-mobipromo_cm520-79f.qca4019 | ||
board-nec_wg2600hp3.qca9984 | ||
board-plasmacloud_pa1200.qca4019 | ||
board-plasmacloud_pa2200.qca4019 | ||
board-plasmacloud_pa2200.qca9888 | ||
board-qxwlan_e2600ac.qca4019 | ||
Makefile |