mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
0dfc0495fc
Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6281 @1GHz - 128Mb RAM - 256Mb NAND - 1x GbE LAN (Marvell 88E1116) - 1x USB 2.0 - 2x SATA - PCF8563 RTC - LM75 sensor - TC654 PWM fan controller - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 netgear_stora-u-boot.kwb - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade The fan is controlled in 3 stages by a script running every minute from cron, measuring the CPU temperature. Snippets taken from bodhi <mibodhi@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> |
||
---|---|---|
.. | ||
apex | ||
arm-trusted-firmware-bcm63xx | ||
arm-trusted-firmware-mediatek | ||
arm-trusted-firmware-mvebu | ||
arm-trusted-firmware-rockchip | ||
arm-trusted-firmware-sunxi | ||
arm-trusted-firmware-tools | ||
at91bootstrap | ||
fconfig | ||
grub2 | ||
imx-bootlets | ||
kexec-tools | ||
kobs-ng | ||
mt7623n-preloader | ||
opensbi | ||
rkbin | ||
tfa-layerscape | ||
uboot-armsr | ||
uboot-at91 | ||
uboot-bcm53xx | ||
uboot-bcm4908 | ||
uboot-d1 | ||
uboot-envtools | ||
uboot-fritz4040 | ||
uboot-imx | ||
uboot-kirkwood | ||
uboot-lantiq | ||
uboot-layerscape | ||
uboot-mediatek | ||
uboot-mvebu | ||
uboot-mxs | ||
uboot-omap | ||
uboot-oxnas | ||
uboot-rockchip | ||
uboot-sifiveu | ||
uboot-sunxi | ||
uboot-tegra | ||
uboot-zynq |