mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
576621f1e3
This patch introduces support of new boards with ARC cores.
[1] Synopsys SDP board
This is a new-generation development board from Synopsys that
consists of base-board and CPU tile-board (which might have a real
ASIC or FPGA with CPU image).
It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C
etc and is intended to be used for early development of ARC-based
products.
[2] nSIM
This is a virtual board implemented in Synopsys proprietary
software simulator (even though available for free for open source
community). This board has only serial port as a peripheral and so
it is meant to be used for runtime testing which is especially
useful during bring-up of new tools and platforms.
What's also important ARC cores are very configurable so there're
many variations of options like cache sizes, their line lengths,
additional hardware blocks like multipliers, dividers etc. And this
board could be used to make sure built software still runs on
different HW configurations.
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
SVN-Revision: 47589
101 lines
2.4 KiB
Plaintext
101 lines
2.4 KiB
Plaintext
/*
|
|
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* Device tree for AXC001 770D/EM6/AS221 CPU card
|
|
* Note that this file only supports the 770D CPU
|
|
*/
|
|
|
|
/ {
|
|
compatible = "snps,arc";
|
|
clock-frequency = <750000000>; /* 750 MHZ */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpu_card {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0x00000000 0xf0000000 0x10000000>;
|
|
|
|
cpu_intc: arc700-intc@cpu {
|
|
compatible = "snps,arc700-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
/*
|
|
* this GPIO block ORs all interrupts on CPU card (creg,..)
|
|
* to uplink only 1 IRQ to ARC core intc
|
|
*/
|
|
dw-apb-gpio@0x2000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = < 0x2000 0x80 >;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ictl_intc: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <30>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <15>;
|
|
};
|
|
};
|
|
|
|
debug_uart: dw-apb-uart@0x5000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x5000 0x100>;
|
|
clock-frequency = <33333000>;
|
|
interrupt-parent = <&ictl_intc>;
|
|
interrupts = <19 4>;
|
|
baud = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
};
|
|
|
|
arcpmu0: pmu {
|
|
compatible = "snps,arc700-pct";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* This INTC is actually connected to DW APB GPIO
|
|
* which acts as a wire between MB INTC and CPU INTC.
|
|
* GPIO INTC is configured in platform init code
|
|
* and here we mimic direct connection from MB INTC to
|
|
* CPU INTC, thus we set "interrupts = <7>" instead of
|
|
* "interrupts = <12>"
|
|
*
|
|
* This intc actually resides on MB, but we move it here to
|
|
* avoid duplicating the MB dtsi file given that IRQ from
|
|
* this intc to cpu intc are different for axs101 and axs103
|
|
*/
|
|
mb_intc: dw-apb-ictl@0xe0012000 {
|
|
#interrupt-cells = <1>;
|
|
compatible = "snps,dw-apb-ictl";
|
|
reg = < 0xe0012000 0x200 >;
|
|
interrupt-controller;
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = < 7 >;
|
|
};
|
|
|
|
memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x80000000 0x40000000>;
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512MiB */
|
|
};
|
|
};
|