openwrt/target/linux/ath79
Tobias Schramm 5736af8024 ath79: Add support for Ubiquiti NanoStation AC loco
Atheros AR9342, 16 MB flash, 64 MB RAM

Successor to the old NanoStation M5 loco with AC wireless.

Includes a mac80211 patch for ath10k_pci because Ubiquiti uses a Ubiquiti
branded and customized QCA988X with vendor id 0777 and device id 11ac for
AC wireless.

Installation

1. Connect to serial header on device (8N1 115200)
2. Power on device and enter uboot console
3. Set up tftp server serving an openwrt initramfs build
4. Load initramfs build using the command tftpboot in the uboot cli
5. Boot the loaded image using the command bootm
6. Copy squashfs openwrt sysupgrade build to the booted device
7. Use mtd to write sysupgrade to partition "firmware"
8. Reboot and enjoy

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2018-10-07 10:46:20 +02:00
..
base-files ath79: Add support for Ubiquiti NanoStation AC loco 2018-10-07 10:46:20 +02:00
dts ath79: Add support for Ubiquiti NanoStation AC loco 2018-10-07 10:46:20 +02:00
files ath79: port cybertan_part from ar71xx 2018-09-10 09:07:11 +02:00
generic ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
image ath79: Add support for Ubiquiti NanoStation AC loco 2018-10-07 10:46:20 +02:00
nand ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
patches-4.14 kernel: bump 4.14 to 4.14.73 2018-10-02 13:44:36 +02:00
tiny ath79: add support for TP-Link TL-WR941N/ND v2/v3 2018-08-14 10:19:37 +02:00
config-4.14 ath79: add support for Buffalo WZR-HP-AG300H 2018-09-10 09:35:07 +02:00
Makefile ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00