mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
450ec48d61
Instead of taking the input of one temperature sensor (temp1), the script takes into account three temperature sensors to control the PWM of the cooling fan. temp1 -> placed on main board temp2 -> placed on main board temp3 -> placed on or close to chipset All three temperatures give valid input for the PWM of the fan on NSA310 and are actually changing. Tested on two NSA310. Signed-off-by: Thomas Beckler <thomas.beckler@hotmail.com> Reviewed-by: Alberto Bursi <bobafetthotmail@gmail.com> [commit title/message facelift, code cleanup] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
49 lines
2.0 KiB
Bash
Executable File
49 lines
2.0 KiB
Bash
Executable File
#!/bin/sh /etc/rc.common
|
|
|
|
START=98
|
|
|
|
boot() {
|
|
# configuring (lm85/lm63) onboard temp/fan controller to run the fan on its own
|
|
# for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
|
|
|
|
case $(board_name) in
|
|
iom,ix2-200)
|
|
path_to_hwmon='/sys/class/hwmon/hwmon0'
|
|
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
|
|
;;
|
|
seagate,blackarmor-nas220)
|
|
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
|
# adt7476 fan control chip. 3 temp sensors. Set to 1/4 speed at 35C and max speed at 48C.
|
|
echo 7 > "$path_to_hwmon/pwm1_auto_channels_temp"
|
|
echo 64 > "$path_to_hwmon/pwm1_auto_point1_pwm"
|
|
echo 255 > "$path_to_hwmon/pwm1_auto_point2_pwm"
|
|
echo 35000 > "$path_to_hwmon/temp1_auto_point1_temp"
|
|
echo 48000 > "$path_to_hwmon/temp1_auto_point2_temp"
|
|
echo 35000 > "$path_to_hwmon/temp2_auto_point1_temp"
|
|
echo 48000 > "$path_to_hwmon/temp2_auto_point2_temp"
|
|
echo 35000 > "$path_to_hwmon/temp3_auto_point1_temp"
|
|
echo 48000 > "$path_to_hwmon/temp3_auto_point2_temp"
|
|
echo 2 > "$path_to_hwmon/pwm1_enable"
|
|
;;
|
|
zyxel,nsa310b)
|
|
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
|
# use the max. value of (temp1) OR (temp2) OR (temp3) as an input
|
|
# for the PWM of the cooling fan
|
|
echo 123 > "$path_to_hwmon/pwm1_auto_channels"
|
|
# Temperature sensor #1 placed on mainboard
|
|
echo 30000 > "$path_to_hwmon/temp1_auto_temp_min"
|
|
echo 49600 > "$path_to_hwmon/temp1_auto_temp_max"
|
|
# Temperature sensor #2 placed on mainboard
|
|
# range: 0 to 127000 in steps of 1000 [millicelsius]
|
|
echo 30000 > "$path_to_hwmon/temp2_auto_temp_min"
|
|
# range: 0 to 127000 in steps of ???? [millicelsius]
|
|
echo 49600 > "$path_to_hwmon/temp2_auto_temp_max"
|
|
# Temperature sensor #3 placed close to a chipset
|
|
# range: 0 to 60000 in steps of 1000 [millicelsius]
|
|
echo 23000 > "$path_to_hwmon/temp3_auto_temp_min"
|
|
# pre-defined steps: 103000, 122000, 143300, 170000 in [millicelsius]
|
|
echo 103000 > "$path_to_hwmon/temp3_auto_temp_max"
|
|
;;
|
|
esac
|
|
}
|