mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
60edf49f7b
KD20 got an IC+ phy, without the driver the phy is not properly initialized resulting in ethernet not working unless being already initialized by the vendor loader. upstream commit 368b4d2b49bbbf379d9334747fbbd2aaaafe4356 drivers: net: remove dead drivers removed icplus.c due to the lack of in-tree users. Partially revert that commit adding back the IC+ driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43508
384 lines
12 KiB
C
384 lines
12 KiB
C
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_ARM1136
|
|
#define CONFIG_OX820
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
#include <asm/arch/cpu.h> /* get chip and board defs */
|
|
|
|
/* make cmd_ide.c quiet when compile */
|
|
#define __io
|
|
|
|
/*#define CONFIG_ARCH_CPU_INIT*/
|
|
/*#define CONFIG_DISPLAY_CPUINFO*/
|
|
/*#define CONFIG_DISPLAY_BOARDINFO*/
|
|
/*#define CONFIG_BOARD_EARLY_INIT_F*/
|
|
/*#define CONFIG_SKIP_LOWLEVEL_INIT*/
|
|
|
|
/* mem */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x60000000
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_MIN_SDRAM_SIZE (128 * 1024 * 1024) /* 128 MB */
|
|
#define CONFIG_MAX_SDRAM_SIZE (512 * 1024 * 1024) /* 512 MB */
|
|
#define CONFIG_SRAM_BASE 0x50000000
|
|
#define CONFIG_SRAM_SIZE (64 * 1024)
|
|
|
|
/* need do dma so better keep dcache off */
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
|
|
/* clock */
|
|
#define CONFIG_PLLA_FREQ_MHZ 800
|
|
#define CONFIG_RPSCLK 6250000
|
|
#define CONFIG_SYS_HZ 1000
|
|
#define CONFIG_SYS_CLK_FREQ CONFIG_RPSCLK
|
|
#define CONFIG_SYS_TIMERBASE TIMER1_BASE
|
|
#define CONFIG_TIMER_PRESCALE TIMER_PRESCALE_16
|
|
|
|
/* serial */
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_CLK CONFIG_RPSCLK
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_NS16550_COM1 UART_1_BASE
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
/* ide */
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0
|
|
#define CONFIG_IDE_PLX
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 2
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_IDE_PREINIT
|
|
#define CONFIG_LBA48
|
|
|
|
/* nand */
|
|
#define CONFIG_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE STATIC_CS0_BASE
|
|
#define NAND_CLE_ADDR_PIN 19
|
|
#define NAND_ALE_ADDR_PIN 18
|
|
#define MTDPARTS_DEFAULT "mtdparts=41000000.nand:" \
|
|
"14m(boot)," \
|
|
"-(ubi)"
|
|
#define MTDIDS_DEFAULT "nand0=41000000.nand"
|
|
#define UBIPART_DEFAULT "ubi"
|
|
|
|
/* net */
|
|
#define CONFIG_DESIGNWARE_ETH
|
|
#define CONFIG_DW_ALTDESCRIPTOR
|
|
#define CONFIG_MII
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_REALTEK
|
|
#define CONFIG_PHY_ICPLUS
|
|
|
|
/* spl */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define USE_DL_PREFIX /* rename malloc free etc, so we can override them */
|
|
#endif
|
|
|
|
#if defined(CONFIG_BOOT_FROM_NAND) || defined(CONFIG_BOOT_FROM_SATA)
|
|
#define CONFIG_SPL
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_TEXT_BASE 0x50000000
|
|
#define CONFIG_SPL_STACK (CONFIG_SRAM_BASE + (48 * 1024))
|
|
#define CONFIG_SPL_DISPLAY_PRINT
|
|
#define CONFIG_SPL_BSS_DRAM_START 0x65000000
|
|
#define CONFIG_SPL_BSS_DRAM_SIZE 0x01000000
|
|
#define CONFIG_SPL_MALLOC_START 0x66000000
|
|
#endif
|
|
|
|
#if defined(CONFIG_BOOT_FROM_NAND)
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define BOOT_DEVICE_TYPE "NAND"
|
|
#define BOOT_DEVICE_NAND 0xfeedbacc
|
|
#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_NAND
|
|
#define CONFIG_SPL_NAND_SIMPLE
|
|
#define CONFIG_SPL_NAND_ECC
|
|
#define CONFIG_SPL_NAND_SOFTECC
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 6
|
|
#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
|
|
48, 49, 50, 51, 52, 53, 54, 55, \
|
|
56, 57, 58, 59, 60, 61, 62, 63}
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
/* pages per erase block */
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE)
|
|
/* nand spl use 1 erase block, and use bit to byte encode for reliability */
|
|
#define CONFIG_SPL_MAX_SIZE (128 * 1024 / 8)
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00040000
|
|
/* spl kernel load is not enabled */
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
|
|
#define CONFIG_CMD_SPL_NAND_OFS 0
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE 1024
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
|
|
/* CONFIG_BOOT_FROM_NAND end */
|
|
|
|
#elif defined(CONFIG_BOOT_FROM_SATA)
|
|
#define CONFIG_SPL_BLOCK_SUPPORT
|
|
#define BOOT_DEVICE_TYPE "SATA"
|
|
#define BOOT_DEVICE_BLOCK 860202
|
|
#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_BLOCK
|
|
#define CONFIG_SPL_MAX_SIZE (36 * 1024)
|
|
#define CONFIG_SPL_LIBDISK_SUPPORT
|
|
#define CONFIG_SPL_BLOCKDEV_INTERFACE "ide"
|
|
#define CONFIG_SPL_BLOCKDEV_ID 0
|
|
|
|
#ifdef CONFIG_BOOT_FROM_FAT /* u-boot in fat partition */
|
|
|
|
#define CONFIG_SPL_FAT_SUPPORT
|
|
|
|
#define CONFIG_BLOCKDEV_FAT_BOOT_PARTITION 1 /* first partition */
|
|
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" /* u-boot file name */
|
|
/* enable U-Boot Falcon Mode */
|
|
#define CONFIG_CMD_SPL
|
|
#define CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "bootargs.bin" /* boot parameters */
|
|
#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "falcon.img" /* kernel */
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
|
|
|
|
#elif CONFIG_BOOT_FROM_EXT4
|
|
|
|
#define CONFIG_SPL_EXT4_SUPPORT
|
|
#define CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION 1 /* first partition */
|
|
#define CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME "/boot/u-boot.img" /* u-boot file name */
|
|
/* enable U-Boot Falcon Mode */
|
|
#define CONFIG_CMD_SPL
|
|
#define CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_SPL_EXT4_LOAD_ARGS_NAME "/boot/bootargs.bin" /* boot parameters */
|
|
#define CONFIG_SPL_EXT4_LOAD_KERNEL_NAME "/boot/falcon.img" /* kernel */
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
|
|
|
|
#else /* u-boot in raw sectors */
|
|
|
|
#define CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR 1024
|
|
/* spl kernel load is not enabled */
|
|
#define CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR 4096
|
|
#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR 0
|
|
#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS (1024 / 512)
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
|
|
|
|
#endif /* CONFIG_BOOT_FROM_FAT */
|
|
/* CONFIG_BOOT_FROM_SATA end */
|
|
|
|
#else
|
|
/* generic, no spl support */
|
|
#endif
|
|
|
|
/* boot */
|
|
#define CONFIG_IDENT_STRING " for OXNAS"
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_OXNAS
|
|
#ifndef CONFIG_SPL_BUILD
|
|
/* Enable devicetree support */
|
|
#define CONFIG_OF_LIBFDT
|
|
#endif
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_BOOTDELAY 1
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
#define CONFIG_DEFAULT_CONSOLE_PARM "console=ttyS0,115200n8 earlyprintk=serial"
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE)
|
|
#define CONFIG_SYS_AUTOLOAD "no"
|
|
|
|
#define CONFIG_DEFAULT_CONSOLE CONFIG_DEFAULT_CONSOLE_PARM "\0"
|
|
#define CONFIG_BOOTARGS CONFIG_DEFAULT_CONSOLE_PARM
|
|
#define CONFIG_BOOTCOMMAND "run nandboot"
|
|
#define CONFIG_BOOT_RETRY_TIME -1
|
|
#define CONFIG_RESET_TO_RETRY 60
|
|
|
|
#define CONFIG_NETCONSOLE
|
|
#define CONFIG_IPADDR 192.168.50.100
|
|
#define CONFIG_SERVERIP 192.168.50.59
|
|
|
|
/* A sane default configuration...
|
|
* When booting without a valid environment in ubi, first to loading and booting
|
|
* the kernel image directly above U-Boot, maybe both were loaded there by
|
|
* another bootloader.
|
|
* Also use that same offset (0x90000) to load the rescue image later on (by
|
|
* adding it onto the flash address where U-Boot is supposed to be stored by
|
|
* the legacy loader, 0x440000, resulting in offset 0x4d0000 on the flash).
|
|
* When coming up with a valid environment in ubi, first try to load the
|
|
* kernel from a ubi volume kernel, if that fails, fallback to the rescue
|
|
* image stored in boot partition. As a last resort try booting via
|
|
* DHCP/TFTP.
|
|
* In case there is no valid environment, first probe for a uimage in ram left
|
|
* behind by the first bootloader on a tftp boot.
|
|
* If that fails, switch to normal boot order and save environment.
|
|
* The loader is supposed to be written to flash at offset 0x440000 and loaded to
|
|
* RAM at 0x64000000
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"load_kernel_ubi=ubi readvol 0x62000000 kernel;\0" \
|
|
"load_kernel_rescue=nand read 0x62000000 0x4e0000 0x400000;\0" \
|
|
"load_kernel_dhcp=dhcp 0x62000000 oxnas-rescue.bin;\0" \
|
|
"boot_kernel=bootm 0x62000000;\0" \
|
|
"boot_ubi=run load_kernel_ubi && run boot_kernel;\0" \
|
|
"boot_rescue=run load_kernel_rescue && run boot_kernel;\0" \
|
|
"boot_dhcp=run load_kernel_dhcp && run boot_kernel;\0" \
|
|
"normalboot=run boot_ubi; run boot_rescue; run boot_dhcp;\0" \
|
|
"firstboot=bootm 0x640a0000; setenv bootcmd run normalboot; " \
|
|
"setenv firstboot; saveenv; run bootcmd; \0" \
|
|
"bootcmd=run firstboot; \0" \
|
|
"console=" CONFIG_DEFAULT_CONSOLE \
|
|
"bootargs=" CONFIG_BOOTARGS "\0" \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
|
|
/* env */
|
|
#if defined(CONFIG_BOOT_FROM_NAND)
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_OFFSET 0x000C0000
|
|
#define CONFIG_ENV_SIZE 0x00020000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x00100000
|
|
#define CONFIG_ENV_SIZE_REDUND 0x00020000
|
|
#define CONFIG_ENV_RANGE (CONFIG_ENV_SIZE * 2)
|
|
/* CONFIG_BOOT_FROM_NAND end */
|
|
|
|
#elif defined(CONFIG_BOOT_FROM_SATA)
|
|
#ifdef CONFIG_BOOT_FROM_EXT4
|
|
#define CONFIG_ENV_IS_IN_EXT4
|
|
#define CONFIG_START_IDE
|
|
#define EXT4_ENV_INTERFACE "ide"
|
|
#define EXT4_ENV_DEVICE 0
|
|
#define EXT4_ENV_PART 1
|
|
#define EXT4_ENV_FILE "/boot/u-boot.env"
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_FAT
|
|
#define CONFIG_START_IDE
|
|
#define FAT_ENV_INTERFACE "ide"
|
|
#define FAT_ENV_DEVICE 0
|
|
#define FAT_ENV_PART 1
|
|
#define FAT_ENV_FILE "u-boot.env"
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
#endif
|
|
/* CONFIG_BOOT_FROM_SATA end */
|
|
#elif defined(CONFIG_BOOT_FROM_SATA)
|
|
|
|
#else
|
|
/* generic */
|
|
#define CONFIG_ENV_IS_IN_UBI 1
|
|
#define CONFIG_ENV_UBI_PART UBIPART_DEFAULT
|
|
#define CONFIG_ENV_UBI_VOLUME "ubootenv"
|
|
#define CONFIG_ENV_UBI_VOLUME_REDUND "ubootenv2"
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
#endif
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_TEXT_BASE 0x64000000
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x65000000
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT "OX820 # "
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size*/
|
|
#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_AUTO_COMPLETE
|
|
|
|
/* usb */
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_EHCI_IS_TDI
|
|
/* #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x3F */
|
|
#define CONFIG_USB_PLLB_CLK
|
|
#define CONFIG_USB_EHCI_OXNAS
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_USB_STORAGE
|
|
#endif
|
|
#define CONFIG_CMD_USB
|
|
|
|
/* cmds */
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_SAVEENV
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_GREPENV
|
|
#define CONFIG_CMD_ENV_FLAGS
|
|
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_PXE
|
|
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_CMD_UBIFS
|
|
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_FAT_WRITE
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_EXT4
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_CMD_EXT4_WRITE
|
|
#endif
|
|
|
|
#define CONFIG_CMD_ZIP
|
|
#define CONFIG_CMD_UNZIP
|
|
#define CONFIG_CMD_TIME
|
|
#define CONFIG_CMD_SETEXPR
|
|
#define CONFIG_CMD_MD5SUM
|
|
#define CONFIG_CMD_HASH
|
|
#define CONFIG_CMD_INI
|
|
#define CONFIG_CMD_GETTIME
|
|
#define CONFIG_CMD_BOOTMENU
|
|
#define CONFIG_CMD_ELF
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_EFI_PARTITION
|
|
|
|
/* for CONFIG_CMD_MTDPARTS */
|
|
#define CONFIG_MTD_DEVICE
|
|
/* for CONFIG_CMD_UBI */
|
|
#define CONFIG_MTD_PARTITIONS
|
|
/* for CONFIG_CMD_UBI */
|
|
#define CONFIG_RBTREE
|
|
|
|
/* optional, for CONFIG_CMD_BOOTM & required by CONFIG_CMD_UBIFS */
|
|
#define CONFIG_LZO
|
|
#define CONFIG_LZMA
|
|
#define CONFIG_BZIP2
|
|
|
|
/* for CONFIG_CMD_ZIP */
|
|
#define CONFIG_GZIP_COMPRESSED
|
|
/* for CONFIG_CMD_MD5SUM */
|
|
#define CONFIG_MD5
|
|
#define CONFIG_MD5SUM_VERIFY
|
|
/* enable CONFIG_CMD_HASH's verification feature */
|
|
#define CONFIG_HASH_VERIFY
|
|
#define CONFIG_REGEX
|
|
/* for CONFIG_CMD_BOOTMENU & CONFIG_CMD_PXE */
|
|
#define CONFIG_MENU
|
|
|
|
/* for new FIT uImage format generated in OpenWrt */
|
|
#define CONFIG_FIT
|
|
|
|
#endif /* __CONFIG_H */
|