openwrt/target/linux/ramips/dts/Timecloud.dts
Mathias Kresin 563a5b5f94 ramips: add mt7620/1 sdhci pinmux
Set the pins to the required mode via the pinmux driver. It allows to
get rid of the pinmux related code in the sd card driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-06 21:35:53 +02:00

113 lines
1.7 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "thunder,timecloud", "mediatek,mt7621-soc";
model = "Thunder Timecloud";
aliases {
led-status = &led_statuso;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
statw {
label = "timecloud:white:status";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
led_statuso: stato {
label = "timecloud:orange:status";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
BTN_0 {
label = "BTN_0";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
};
};
&sdhci {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uart2", "jtag";
ralink,function = "gpio";
};
};
};