David Bauer 56228e9393 ath79: don't autodetect AR8033 PHY capabilities ... PHY capabilities are currently read from the fiber status page, thus Linux won't advertise 10 / 100 Base-T operation modes, effectively limiting operation to 1000 Base-T. Statically set the PHYs capabilities, avoiding autodetection. The issue itself is properly fixed kernel upstream, however backporting efforts to OpenWrt master resulted in breaking the fiber operation for another target. This is currently only known to be necessary for the Ubiquiti UniFi AC series, so enabling it in the ath79 target should not break somewhere else. Signed-off-by: David Bauer <mail@david-bauer.net>		2021-06-21 22:43:15 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add WiFi migration for AR913x	2020-09-28 16:23:03 +02:00
dts	ath79: use dynamic partitioning for TP-Link CPE series	2021-06-18 08:39:14 +02:00
files	ath79: force SGMII SerDes mode to MAC operation	2021-05-03 01:39:10 +02:00
generic	ath79: add factory.bin for ALLNET ALL-WAP02860AC	2021-06-11 07:20:31 +02:00
image	ath79: set lzma-loader variables to null by default	2021-06-11 07:20:31 +02:00
mikrotik	ath79: mikrotik: swap RB922UAGS-5HPaCD eth0/1 MACs	2021-04-30 10:26:34 +02:00
nand	ath79: remove generic profiles	2021-01-27 21:31:20 +01:00
patches-5.4	ath79: don't autodetect AR8033 PHY capabilities	2021-06-21 22:43:15 +02:00
tiny	ath79: add Senao 'failsafe' sysupgrade procedure	2021-06-11 07:20:31 +02:00
config-5.4	ath79: enable elf mtd splitter	2020-09-09 20:41:50 +03:00
Makefile	ath79: move the squashfs feature to the parent target	2020-11-23 13:20:53 +01:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00