openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 07:46:48 +00:00

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.

Go to file

John Crispin 55ee2e0ef7 ralink: add missing nand layer hack It turned out that mtk_nand driver uses some sophisticated accounting and a general nand code must be patched. This patch adds required read and erase calls to a general nand code. I used a code for re6500 released by Linksys as a reference. All required operations (erase, write and read) are usable. However I found that jffs2 filesystem can be created only on top of a ubi volume. I tried to create jffs2 directly on mtd device but pages with clean markers are became uncorrectable. Signed-off-by: Kirill Berezin <fyiwdt@gmail.com> SVN-Revision: 47565		2015-11-21 21:25:33 +00:00
config	kernel: add support for KERNEL_CGROUP_PIDS	2015-10-26 11:54:56 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	ipq806x: enable vfpv4 support and set cpu type to cortex-a9	2015-11-14 14:22:24 +00:00
package	kernel: fix building RTC drivers	2015-11-21 21:25:28 +00:00
scripts	scripts/diffconfig.sh: reduce config output with CONFIG_BUSYBOX_CUSTOM	2015-11-13 11:34:18 +00:00
target	ralink: add missing nand layer hack	2015-11-21 21:25:33 +00:00
toolchain	gcc: fix internal compiler error on MIPS with MIPS16 enabled (triggered by libpcap)	2015-11-18 00:57:22 +00:00
tools	tools: add isl (used for graphite on GCC 5)	2015-11-13 11:35:37 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	gcc: remove version 4.6, it is no longer needed	2015-11-10 21:10:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org