openwrt/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
Koen Vandeputte ac5297340e kernel: bump 4.14 to 4.14.206
Refreshed all patches.

Altered patches:
- 210-dwc2_defaults.patch
- 708-mc-bus-support-layerscape.patch

Fixes:
- CVE-2020-25656

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-11-16 09:35:05 +01:00

50 lines
1.4 KiB
Diff

From 43ebc7c1b3ed8198b9acf3019eca16e722f7331c Mon Sep 17 00:00:00 2001
From: Ding Tao <miyatsu@qq.com>
Date: Fri, 26 Oct 2018 11:50:28 +0000
Subject: [PATCH] arm64: dts: marvell: armada-37xx: Enable emmc on espressobin
The ESPRESSObin board has a emmc interface available on U11: declare it
and let the bootloader enable it if the emmc is present.
[gregory.clement@bootlin.com: disable the emmc by default]
Signed-off-by: Ding Tao <miyatsu@qq.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../dts/marvell/armada-3720-espressobin.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -97,9 +97,31 @@
cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
vqmmc-supply = <&vcc_sd_reg1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pins>;
status = "okay";
};
+/* U11 */
+&sdhci0 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,xenon-emmc;
+ marvell,xenon-tun-count = <9>;
+ marvell,pad-type = "fixed-1-8v";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+/*
+ * This eMMC is not populated on all boards, so disable it by
+ * default and let the bootloader enable it, if it is present
+ */
+ status = "disabled";
+};
+
&spi0 {
status = "okay";