ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
55e9d87754
openwrt/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch
Koen Vandeputte 55e9d87754 kernel: bump 4.14 to 4.14.223 
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2021-03-10 13:55:56 +01:00

1589 lines
50 KiB
Diff
Raw Blame History

From ca86ebf3fddbdfa8aecc4b887ef059948ee79621 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Wed, 17 Apr 2019 18:59:08 +0800
Subject: [PATCH] usb: support layerscape
This is an integrated patch of usb for layerscape
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
arch/arm64/include/asm/io.h | 28 +++
drivers/usb/common/common.c | 50 +++++
drivers/usb/core/usb.c | 1 +
drivers/usb/dwc3/core.c | 167 ++++++++++++++++
drivers/usb/dwc3/core.h | 58 ++++++
drivers/usb/dwc3/ep0.c | 4 +-
drivers/usb/dwc3/gadget.c | 7 +
drivers/usb/dwc3/host.c | 9 +
drivers/usb/gadget/udc/fsl_udc_core.c | 46 +++--
drivers/usb/gadget/udc/fsl_usb2_udc.h | 16 +-
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ehci-fsl.c | 276 +++++++++++++++++++++++---
drivers/usb/host/ehci-fsl.h | 3 +
drivers/usb/host/ehci-hub.c | 2 +
drivers/usb/host/ehci.h | 3 +
drivers/usb/host/fsl-mph-dr-of.c | 11 +
drivers/usb/host/xhci-hub.c | 22 ++
drivers/usb/host/xhci-plat.c | 16 +-
drivers/usb/host/xhci-ring.c | 28 ++-
drivers/usb/host/xhci.c | 37 +++-
drivers/usb/host/xhci.h | 10 +-
drivers/usb/phy/phy-fsl-usb.c | 59 ++++--
drivers/usb/phy/phy-fsl-usb.h | 8 +
include/linux/usb.h | 1 +
include/linux/usb/of.h | 2 +
25 files changed, 780 insertions(+), 86 deletions(-)
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -210,6 +210,34 @@ extern void __iomem *ioremap_cache(phys_
#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
#define iowrite64be(v,p) ({ __iowmb(); __raw_writeq((__force __u64)cpu_to_be64(v), p); })
+/* access ports */
+#define setbits32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr))
+#define clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
+
+#define setbits16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr))
+#define clrbits16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
+
+#define setbits8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr))
+#define clrbits8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
+
+/* Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single read-modify-write. These
+ * macros can also be used to set a multiple-bit bit pattern using a mask,
+ * by specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrsetbits_be32(addr, clear, set) \
+ iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
+#define clrsetbits_le32(addr, clear, set) \
+ iowrite32le((ioread32le(addr) & ~(clear)) | (set), (addr))
+#define clrsetbits_be16(addr, clear, set) \
+ iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
+#define clrsetbits_le16(addr, clear, set) \
+ iowrite16le((ioread16le(addr) & ~(clear)) | (set), (addr))
+#define clrsetbits_8(addr, clear, set) \
+ iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
+
#include <asm-generic/io.h>
/*
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -105,6 +105,56 @@ static const char *const usb_dr_modes[]
[USB_DR_MODE_OTG] = "otg",
};
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ const char *dr_mode;
+ int err, i;
+
+ err = of_property_read_string(np, "dr_mode", &dr_mode);
+ if (err < 0)
+ return USB_DR_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+ if (!strcmp(dr_mode, usb_dr_modes[i]))
+ return i;
+
+ return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+
+/**
+ * of_usb_get_maximum_speed - Get maximum requested speed for a given USB
+ * controller.
+ * @np: Pointer to the given device_node
+ *
+ * The function gets the maximum speed string from property "maximum-speed",
+ * and returns the corresponding enum usb_device_speed.
+ */
+enum usb_device_speed of_usb_get_maximum_speed(struct device_node *np)
+{
+ const char *maximum_speed;
+ int err;
+ int i;
+
+ err = of_property_read_string(np, "maximum-speed", &maximum_speed);
+ if (err < 0)
+ return USB_SPEED_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(speed_names); i++)
+ if (strcmp(maximum_speed, speed_names[i]) == 0)
+ return i;
+
+ return USB_SPEED_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_maximum_speed);
+
static enum usb_dr_mode usb_get_dr_mode_from_string(const char *str)
{
int ret;
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -593,6 +593,7 @@ struct usb_device *usb_alloc_dev(struct
dev->dev.dma_mask = bus->sysdev->dma_mask;
dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
+ dev->dev.of_node = bus->controller->of_node;
dev->state = USB_STATE_ATTACHED;
dev->lpm_disable_count = 1;
atomic_set(&dev->urbnum, 0);
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -103,6 +103,41 @@ static int dwc3_get_dr_mode(struct dwc3
static void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
static int dwc3_event_buffers_setup(struct dwc3 *dwc);
+/*
+ * dwc3_power_of_all_roothub_ports - Power off all Root hub ports
+ * @dwc3: Pointer to our controller context structure
+ */
+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
+{
+ int i, port_num;
+ u32 reg, op_regs_base, offset;
+ void __iomem *xhci_regs;
+
+ /* xhci regs is not mapped yet, do it temperary here */
+ if (dwc->xhci_resources[0].start) {
+ xhci_regs = ioremap(dwc->xhci_resources[0].start,
+ DWC3_XHCI_REGS_END);
+ if (IS_ERR(xhci_regs)) {
+ dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
+ return;
+ }
+
+ op_regs_base = HC_LENGTH(readl(xhci_regs));
+ reg = readl(xhci_regs + XHCI_HCSPARAMS1);
+ port_num = HCS_MAX_PORTS(reg);
+
+ for (i = 1; i <= port_num; i++) {
+ offset = op_regs_base + XHCI_PORTSC_BASE + 0x10*(i-1);
+ reg = readl(xhci_regs + offset);
+ reg &= ~PORT_POWER;
+ writel(reg, xhci_regs + offset);
+ }
+
+ iounmap(xhci_regs);
+ } else
+ dev_err(dwc->dev, "xhci base reg invalid\n");
+}
+
static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
{
u32 reg;
@@ -111,6 +146,15 @@ static void dwc3_set_prtcap(struct dwc3
reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
reg |= DWC3_GCTL_PRTCAPDIR(mode);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ /*
+ * We have to power off all Root hub ports immediately after DWC3 set
+ * to host mode to avoid VBUS glitch happen when xhci get reset later.
+ */
+ if (dwc->host_vbus_glitches) {
+ if (mode == DWC3_GCTL_PRTCAP_HOST)
+ dwc3_power_off_all_roothub_ports(dwc);
+ }
}
static void __dwc3_set_mode(struct work_struct *work)
@@ -765,6 +809,96 @@ static void dwc3_core_setup_global_contr
static int dwc3_core_get_phy(struct dwc3 *dwc);
static int dwc3_core_ulpi_init(struct dwc3 *dwc);
+/* set global soc bus configuration registers */
+static void dwc3_set_soc_bus_cfg(struct dwc3 *dwc)
+{
+ struct device *dev = dwc->dev;
+ u32 *vals;
+ u32 cfg;
+ int ntype;
+ int ret;
+ int i;
+
+ cfg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
+
+ /*
+ * Handle property "snps,incr-burst-type-adjustment".
+ * Get the number of value from this property:
+ * result <= 0, means this property is not supported.
+ * result = 1, means INCRx burst mode supported.
+ * result > 1, means undefined length burst mode supported.
+ */
+ ntype = device_property_read_u32_array(dev,
+ "snps,incr-burst-type-adjustment", NULL, 0);
+ if (ntype > 0) {
+ vals = kcalloc(ntype, sizeof(u32), GFP_KERNEL);
+ if (!vals) {
+ dev_err(dev, "Error to get memory\n");
+ return;
+ }
+ /* Get INCR burst type, and parse it */
+ ret = device_property_read_u32_array(dev,
+ "snps,incr-burst-type-adjustment", vals, ntype);
+ if (ret) {
+ dev_err(dev, "Error to get property\n");
+ return;
+ }
+ *(dwc->incrx_type + 1) = vals[0];
+ if (ntype > 1) {
+ *dwc->incrx_type = 1;
+ for (i = 1; i < ntype; i++) {
+ if (vals[i] > *(dwc->incrx_type + 1))
+ *(dwc->incrx_type + 1) = vals[i];
+ }
+ } else
+ *dwc->incrx_type = 0;
+
+ /* Enable Undefined Length INCR Burst and Enable INCRx Burst */
+ cfg &= ~DWC3_GSBUSCFG0_INCRBRST_MASK;
+ if (*dwc->incrx_type)
+ cfg |= DWC3_GSBUSCFG0_INCRBRSTENA;
+ switch (*(dwc->incrx_type + 1)) {
+ case 256:
+ cfg |= DWC3_GSBUSCFG0_INCR256BRSTENA;
+ break;
+ case 128:
+ cfg |= DWC3_GSBUSCFG0_INCR128BRSTENA;
+ break;
+ case 64:
+ cfg |= DWC3_GSBUSCFG0_INCR64BRSTENA;
+ break;
+ case 32:
+ cfg |= DWC3_GSBUSCFG0_INCR32BRSTENA;
+ break;
+ case 16:
+ cfg |= DWC3_GSBUSCFG0_INCR16BRSTENA;
+ break;
+ case 8:
+ cfg |= DWC3_GSBUSCFG0_INCR8BRSTENA;
+ break;
+ case 4:
+ cfg |= DWC3_GSBUSCFG0_INCR4BRSTENA;
+ break;
+ case 1:
+ break;
+ default:
+ dev_err(dev, "Invalid property\n");
+ break;
+ }
+ }
+
+ /* Handle usb snooping */
+ if (dwc->dma_coherent) {
+ cfg &= ~DWC3_GSBUSCFG0_SNP_MASK;
+ cfg |= (AXI3_CACHE_TYPE_SNP << DWC3_GSBUSCFG0_DATARD_SHIFT) |
+ (AXI3_CACHE_TYPE_SNP << DWC3_GSBUSCFG0_DESCRD_SHIFT) |
+ (AXI3_CACHE_TYPE_SNP << DWC3_GSBUSCFG0_DATAWR_SHIFT) |
+ (AXI3_CACHE_TYPE_SNP << DWC3_GSBUSCFG0_DESCWR_SHIFT);
+ }
+
+ dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg);
+}
+
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
@@ -827,6 +961,8 @@ static int dwc3_core_init(struct dwc3 *d
/* Adjust Frame Length */
dwc3_frame_length_adjustment(dwc);
+ dwc3_set_soc_bus_cfg(dwc);
+
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
@@ -873,6 +1009,22 @@ static int dwc3_core_init(struct dwc3 *d
dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
}
+ if (dwc->dr_mode == USB_DR_MODE_HOST ||
+ dwc->dr_mode == USB_DR_MODE_OTG) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
+
+ /*
+ * Enable Auto retry Feature to make the controller operating in
+ * Host mode on seeing transaction errors(CRC errors or internal
+ * overrun scenerios) on IN transfers to reply to the device
+ * with a non-terminating retry ACK (i.e, an ACK transcation
+ * packet with Retry=1 & Nump != 0)
+ */
+ reg |= DWC3_GUCTL_HSTINAUTORETRY;
+
+ dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
+ }
+
return 0;
err4:
@@ -1079,6 +1231,8 @@ static void dwc3_get_properties(struct d
&hird_threshold);
dwc->usb3_lpm_capable = device_property_read_bool(dev,
"snps,usb3_lpm_capable");
+ dwc->dma_coherent = device_property_read_bool(dev,
+ "dma-coherent");
dwc->disable_scramble_quirk = device_property_read_bool(dev,
"snps,disable_scramble_quirk");
@@ -1113,8 +1267,16 @@ static void dwc3_get_properties(struct d
dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
"snps,parkmode-disable-ss-quirk");
+ dwc->quirk_reverse_in_out = device_property_read_bool(dev,
+ "snps,quirk_reverse_in_out");
+ dwc->quirk_stop_transfer_in_block = device_property_read_bool(dev,
+ "snps,quirk_stop_transfer_in_block");
+ dwc->quirk_stop_ep_in_u1 = device_property_read_bool(dev,
+ "snps,quirk_stop_ep_in_u1");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
+ dwc->disable_devinit_u1u2_quirk = device_property_read_bool(dev,
+ "snps,disable_devinit_u1u2");
device_property_read_u8(dev, "snps,tx_de_emphasis",
&tx_de_emphasis);
device_property_read_string(dev, "snps,hsphy_interface",
@@ -1125,6 +1287,9 @@ static void dwc3_get_properties(struct d
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->host_vbus_glitches = device_property_read_bool(dev,
+ "snps,host-vbus-glitches");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1387,12 +1552,14 @@ static int dwc3_resume_common(struct dwc
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
case USB_DR_MODE_OTG:
spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_resume(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
/* FALLTHROUGH */
case USB_DR_MODE_HOST:
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
default:
/* do nothing */
break;
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -161,6 +161,32 @@
/* Bit fields */
+/* Global SoC Bus Configuration Register 0 */
+#define AXI3_CACHE_TYPE_AW 0x8 /* write allocate */
+#define AXI3_CACHE_TYPE_AR 0x4 /* read allocate */
+#define AXI3_CACHE_TYPE_SNP 0x2 /* cacheable */
+#define AXI3_CACHE_TYPE_BUF 0x1 /* bufferable */
+#define DWC3_GSBUSCFG0_DATARD_SHIFT 28
+#define DWC3_GSBUSCFG0_DESCRD_SHIFT 24
+#define DWC3_GSBUSCFG0_DATAWR_SHIFT 20
+#define DWC3_GSBUSCFG0_DESCWR_SHIFT 16
+#define DWC3_GSBUSCFG0_SNP_MASK 0xffff0000
+#define DWC3_GSBUSCFG0_DATABIGEND (1 << 11)
+#define DWC3_GSBUSCFG0_DESCBIGEND (1 << 10)
+#define DWC3_GSBUSCFG0_INCR256BRSTENA (1 << 7) /* INCR256 burst */
+#define DWC3_GSBUSCFG0_INCR128BRSTENA (1 << 6) /* INCR128 burst */
+#define DWC3_GSBUSCFG0_INCR64BRSTENA (1 << 5) /* INCR64 burst */
+#define DWC3_GSBUSCFG0_INCR32BRSTENA (1 << 4) /* INCR32 burst */
+#define DWC3_GSBUSCFG0_INCR16BRSTENA (1 << 3) /* INCR16 burst */
+#define DWC3_GSBUSCFG0_INCR8BRSTENA (1 << 2) /* INCR8 burst */
+#define DWC3_GSBUSCFG0_INCR4BRSTENA (1 << 1) /* INCR4 burst */
+#define DWC3_GSBUSCFG0_INCRBRSTENA (1 << 0) /* undefined length enable */
+#define DWC3_GSBUSCFG0_INCRBRST_MASK 0xff
+
+/* Global SoC Bus Configuration Register 1 */
+#define DWC3_GSBUSCFG1_1KPAGEENA (1 << 12) /* 1K page boundary enable */
+#define DWC3_GSBUSCFG1_PTRANSLIMIT_MASK 0xf00
+
/* Global Debug Queue/FIFO Space Available Register */
#define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f)
#define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0)
@@ -205,6 +231,9 @@
#define DWC3_GCTL_GBLHIBERNATIONEN BIT(1)
#define DWC3_GCTL_DSBLCLKGTNG BIT(0)
+/* Global User Control Register */
+#define DWC3_GUCTL_HSTINAUTORETRY BIT(14)
+
/* Global User Control 1 Register */
#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
@@ -479,6 +508,14 @@
#define DWC3_DEV_IMOD_INTERVAL_SHIFT 0
#define DWC3_DEV_IMOD_INTERVAL_MASK (0xffff << 0)
+/* Partial XHCI Register and Bit fields for quirk */
+#define XHCI_HCSPARAMS1 0x4
+#define XHCI_PORTSC_BASE 0x400
+#define PORT_POWER (1 << 9)
+#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
+#define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff)
+#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
+
/* Structures */
struct dwc3_trb;
@@ -790,6 +827,7 @@ struct dwc3_scratchpad_array {
* @regs: base address for our registers
* @regs_size: address space size
* @fladj: frame length adjustment
+ * @incrx_type: INCR burst type adjustment
* @irq_gadget: peripheral controller's IRQ number
* @nr_scratch: number of scratch buffers
* @u1u2: only used on revisions <1.83a for workaround
@@ -845,6 +883,7 @@ struct dwc3_scratchpad_array {
* @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
* @three_stage_setup: set if we perform a three phase setup
* @usb3_lpm_capable: set if hadrware supports Link Power Management
+ * @dma_coherent: set if hadrware supports DMA snoop
* @disable_scramble_quirk: set if we enable the disable scramble quirk
* @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
* @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
@@ -926,6 +965,12 @@ struct dwc3 {
enum usb_phy_interface hsphy_mode;
u32 fladj;
+ /*
+ * For INCR burst type.
+ * First field: for undefined length INCR burst type enable.
+ * Second field: for INCRx burst type enable
+ */
+ u32 incrx_type[2];
u32 irq_gadget;
u32 nr_scratch;
u32 u1u2;
@@ -1010,6 +1055,7 @@ struct dwc3 {
unsigned setup_packet_pending:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
+ unsigned dma_coherent:1;
unsigned disable_scramble_quirk:1;
unsigned u2exit_lfps_quirk:1;
@@ -1030,6 +1076,11 @@ struct dwc3 {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+ unsigned disable_devinit_u1u2_quirk:1;
+ unsigned quirk_reverse_in_out:1;
+ unsigned quirk_stop_transfer_in_block:1;
+ unsigned quirk_stop_ep_in_u1:1;
+ unsigned host_vbus_glitches:1;
unsigned dis_metastability_quirk:1;
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -391,7 +391,7 @@ static int dwc3_ep0_handle_u1(struct dwc
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- if (set)
+ if (set && !dwc->disable_devinit_u1u2_quirk)
reg |= DWC3_DCTL_INITU1ENA;
else
reg &= ~DWC3_DCTL_INITU1ENA;
@@ -413,7 +413,7 @@ static int dwc3_ep0_handle_u2(struct dwc
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- if (set)
+ if (set && !dwc->disable_devinit_u1u2_quirk)
reg |= DWC3_DCTL_INITU2ENA;
else
reg &= ~DWC3_DCTL_INITU2ENA;
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3231,6 +3231,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
{
int ret;
int irq;
+ u32 reg;
irq = dwc3_gadget_get_irq(dwc);
if (irq < 0) {
@@ -3309,6 +3310,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+ if (dwc->disable_devinit_u1u2_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA);
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ }
+
return 0;
err4:
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -98,6 +98,15 @@ int dwc3_host_init(struct dwc3 *dwc)
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
+ if (dwc->quirk_reverse_in_out)
+ props[prop_idx++].name = "quirk-reverse-in-out";
+
+ if (dwc->quirk_stop_transfer_in_block)
+ props[prop_idx++].name = "quirk-stop-transfer-in-block";
+
+ if (dwc->quirk_stop_ep_in_u1)
+ props[prop_idx++].name = "quirk-stop-ep-in-u1";
+
if (dwc->usb3_lpm_capable)
props[prop_idx++].name = "usb3-lpm-capable";
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -198,7 +198,11 @@ __acquires(ep->udc->lock)
spin_unlock(&ep->udc->lock);
- usb_gadget_giveback_request(&ep->ep, &req->req);
+ /* this complete() should a func implemented by gadget layer,
+ * eg fsg->bulk_in_complete()
+ */
+ if (req->req.complete)
+ usb_gadget_giveback_request(&ep->ep, &req->req);
spin_lock(&ep->udc->lock);
ep->stopped = stopped;
@@ -245,10 +249,10 @@ static int dr_controller_setup(struct fs
if (udc->pdata->have_sysif_regs) {
if (udc->pdata->controller_ver) {
/* controller version 1.6 or above */
- ctrl = __raw_readl(&usb_sys_regs->control);
+ ctrl = ioread32be(&usb_sys_regs->control);
ctrl &= ~USB_CTRL_UTMI_PHY_EN;
ctrl |= USB_CTRL_USB_EN;
- __raw_writel(ctrl, &usb_sys_regs->control);
+ iowrite32be(ctrl, &usb_sys_regs->control);
}
}
portctrl |= PORTSCX_PTS_ULPI;
@@ -257,13 +261,14 @@ static int dr_controller_setup(struct fs
portctrl |= PORTSCX_PTW_16BIT;
/* fall through */
case FSL_USB2_PHY_UTMI:
+ case FSL_USB2_PHY_UTMI_DUAL:
if (udc->pdata->have_sysif_regs) {
if (udc->pdata->controller_ver) {
/* controller version 1.6 or above */
- ctrl = __raw_readl(&usb_sys_regs->control);
+ ctrl = ioread32be(&usb_sys_regs->control);
ctrl |= (USB_CTRL_UTMI_PHY_EN |
USB_CTRL_USB_EN);
- __raw_writel(ctrl, &usb_sys_regs->control);
+ iowrite32be(ctrl, &usb_sys_regs->control);
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI
PHY CLK to become stable - 10ms*/
}
@@ -329,22 +334,22 @@ static int dr_controller_setup(struct fs
/* Config control enable i/o output, cpu endian register */
#ifndef CONFIG_ARCH_MXC
if (udc->pdata->have_sysif_regs) {
- ctrl = __raw_readl(&usb_sys_regs->control);
+ ctrl = ioread32be(&usb_sys_regs->control);
ctrl |= USB_CTRL_IOENB;
- __raw_writel(ctrl, &usb_sys_regs->control);
+ iowrite32be(ctrl, &usb_sys_regs->control);
}
#endif
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+#if !defined(CONFIG_NOT_COHERENT_CACHE)
/* Turn on cache snooping hardware, since some PowerPC platforms
* wholly rely on hardware to deal with cache coherent. */
if (udc->pdata->have_sysif_regs) {
/* Setup Snooping for all the 4GB space */
tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */
- __raw_writel(tmp, &usb_sys_regs->snoop1);
+ iowrite32be(tmp, &usb_sys_regs->snoop1);
tmp |= 0x80000000; /* starts from 0x8000000, size 2G */
- __raw_writel(tmp, &usb_sys_regs->snoop2);
+ iowrite32be(tmp, &usb_sys_regs->snoop2);
}
#endif
@@ -1056,7 +1061,7 @@ static int fsl_ep_fifo_status(struct usb
struct ep_queue_head *qh;
ep = container_of(_ep, struct fsl_ep, ep);
- if (!_ep || (!ep->ep.desc && ep_index(ep) != 0))
+ if (!_ep || !ep->ep.desc || (ep_index(ep) == 0))
return -ENODEV;
udc = (struct fsl_udc *)ep->udc;
@@ -1598,14 +1603,13 @@ static int process_ep_req(struct fsl_udc
struct fsl_req *curr_req)
{
struct ep_td_struct *curr_td;
- int td_complete, actual, remaining_length, j, tmp;
+ int actual, remaining_length, j, tmp;
int status = 0;
int errors = 0;
struct ep_queue_head *curr_qh = &udc->ep_qh[pipe];
int direction = pipe % 2;
curr_td = curr_req->head;
- td_complete = 0;
actual = curr_req->req.length;
for (j = 0; j < curr_req->dtd_count; j++) {
@@ -1650,11 +1654,9 @@ static int process_ep_req(struct fsl_udc
status = -EPROTO;
break;
} else {
- td_complete++;
break;
}
} else {
- td_complete++;
VDBG("dTD transmitted successful");
}
@@ -1697,7 +1699,7 @@ static void dtd_complete_irq(struct fsl_
curr_ep = get_ep_by_pipe(udc, i);
/* If the ep is configured */
- if (!curr_ep->ep.name) {
+ if (strncmp(curr_ep->name, "ep", 2)) {
WARNING("Invalid EP?");
continue;
}
@@ -2419,10 +2421,12 @@ static int fsl_udc_probe(struct platform
usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET;
#endif
+#ifdef CONFIG_ARCH_MXC
/* Initialize USB clocks */
ret = fsl_udc_clk_init(pdev);
if (ret < 0)
goto err_iounmap_noclk;
+#endif
/* Read Device Controller Capability Parameters register */
dccparams = fsl_readl(&dr_regs->dccparams);
@@ -2462,9 +2466,11 @@ static int fsl_udc_probe(struct platform
dr_controller_setup(udc_controller);
}
+#ifdef CONFIG_ARCH_MXC
ret = fsl_udc_clk_finalize(pdev);
if (ret)
goto err_free_irq;
+#endif
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
@@ -2477,6 +2483,7 @@ static int fsl_udc_probe(struct platform
/* Setup gadget.dev and register with kernel */
dev_set_name(&udc_controller->gadget.dev, "gadget");
udc_controller->gadget.dev.of_node = pdev->dev.of_node;
+ set_dma_ops(&udc_controller->gadget.dev, pdev->dev.dma_ops);
if (!IS_ERR_OR_NULL(udc_controller->transceiver))
udc_controller->gadget.is_otg = 1;
@@ -2528,7 +2535,9 @@ err_free_irq:
err_iounmap:
if (pdata->exit)
pdata->exit(pdev);
+#ifdef CONFIG_ARCH_MXC
fsl_udc_clk_release();
+#endif
err_iounmap_noclk:
iounmap(dr_regs);
err_release_mem_region:
@@ -2556,8 +2565,9 @@ static int fsl_udc_remove(struct platfor
udc_controller->done = &done;
usb_del_gadget_udc(&udc_controller->gadget);
+#ifdef CONFIG_ARCH_MXC
fsl_udc_clk_release();
-
+#endif
/* DR has been stopped in usb_gadget_unregister_driver() */
remove_proc_file();
--- a/drivers/usb/gadget/udc/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
@@ -20,6 +20,10 @@
#define USB_MAX_CTRL_PAYLOAD 64
#define USB_DR_SYS_OFFSET 0x400
+#ifdef CONFIG_SOC_LS1021A
+#undef CONFIG_ARCH_MXC
+#endif
+
/* USB DR device mode registers (Little Endian) */
struct usb_dr_device {
/* Capability register */
@@ -597,18 +601,6 @@ struct platform_device;
int fsl_udc_clk_init(struct platform_device *pdev);
int fsl_udc_clk_finalize(struct platform_device *pdev);
void fsl_udc_clk_release(void);
-#else
-static inline int fsl_udc_clk_init(struct platform_device *pdev)
-{
- return 0;
-}
-static inline int fsl_udc_clk_finalize(struct platform_device *pdev)
-{
- return 0;
-}
-static inline void fsl_udc_clk_release(void)
-{
-}
#endif
#endif
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -165,7 +165,7 @@ config XPS_USB_HCD_XILINX
config USB_EHCI_FSL
tristate "Support for Freescale PPC on-chip EHCI USB controller"
- depends on FSL_SOC
+ depends on USB_EHCI_HCD
select USB_EHCI_ROOT_HUB_TT
---help---
Variation of ARC USB block used in some Freescale chips.
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -36,15 +36,126 @@
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_PM
+#include <linux/suspend.h>
+#endif
#include "ehci.h"
#include "ehci-fsl.h"
+#define FSL_USB_PHY_ADDR 0xffe214000
+
+struct ccsr_usb_port_ctrl {
+ u32 ctrl;
+ u32 drvvbuscfg;
+ u32 pwrfltcfg;
+ u32 sts;
+ u8 res_14[0xc];
+ u32 bistcfg;
+ u32 biststs;
+ u32 abistcfg;
+ u32 abiststs;
+ u8 res_30[0x10];
+ u32 xcvrprg;
+ u32 anaprg;
+ u32 anadrv;
+ u32 anasts;
+};
+
+struct ccsr_usb_phy {
+ u32 id;
+ struct ccsr_usb_port_ctrl port1;
+ u8 res_50[0xc];
+ u32 tvr;
+ u32 pllprg[4];
+ u8 res_70[0x4];
+ u32 anaccfg;
+ u32 dbg;
+ u8 res_7c[0x4];
+ struct ccsr_usb_port_ctrl port2;
+ u8 res_dc[0x334];
+};
+
#define DRIVER_DESC "Freescale EHCI Host controller driver"
#define DRV_NAME "ehci-fsl"
static struct hc_driver __read_mostly fsl_ehci_hc_driver;
+struct ehci_fsl {
+ struct ehci_hcd ehci;
+
+#ifdef CONFIG_PM
+struct ehci_regs saved_regs;
+struct ccsr_usb_phy saved_phy_regs;
+/* Saved USB PHY settings, need to restore after deep sleep. */
+u32 usb_ctrl;
+#endif
+ /*
+ * store current hcd state for otg;
+ * have_hcd is true when host drv al already part of otg framework,
+ * otherwise false;
+ * hcd_add is true when otg framework wants to add host
+ * drv as part of otg;flase when it wants to remove it
+ */
+unsigned have_hcd:1;
+unsigned hcd_add:1;
+};
+
+static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
+{
+struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+return container_of(ehci, struct ehci_fsl, ehci);
+}
+
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
+static void do_change_hcd(struct work_struct *work)
+{
+ struct ehci_hcd *ehci = container_of(work, struct ehci_hcd,
+ change_hcd_work);
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+ void __iomem *non_ehci = hcd->regs;
+ int retval;
+
+ if (ehci_fsl->hcd_add && !ehci_fsl->have_hcd) {
+ writel(USBMODE_CM_HOST, non_ehci + FSL_SOC_USB_USBMODE);
+ /* host, gadget and otg share same int line */
+ retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+ if (retval == 0)
+ ehci_fsl->have_hcd = 1;
+ } else if (!ehci_fsl->hcd_add && ehci_fsl->have_hcd) {
+ usb_remove_hcd(hcd);
+ ehci_fsl->have_hcd = 0;
+ }
+}
+#endif
+
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
+static void do_change_hcd(struct work_struct *work)
+{
+ struct ehci_hcd *ehci = container_of(work, struct ehci_hcd,
+ change_hcd_work);
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+ void __iomem *non_ehci = hcd->regs;
+ int retval;
+
+ if (ehci_fsl->hcd_add && !ehci_fsl->have_hcd) {
+ writel(USBMODE_CM_HOST, non_ehci + FSL_SOC_USB_USBMODE);
+ /* host, gadget and otg share same int line */
+ retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+ if (retval == 0)
+ ehci_fsl->have_hcd = 1;
+ } else if (!ehci_fsl->hcd_add && ehci_fsl->have_hcd) {
+ usb_remove_hcd(hcd);
+ ehci_fsl->have_hcd = 0;
+ }
+}
+#endif
+
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -131,6 +242,12 @@ static int fsl_ehci_drv_probe(struct pla
clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
CONTROL_REGISTER_W1C_MASK, 0x4);
+ /* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */
+ if (pdata->controller_ver == FSL_USB_VER_2_5 &&
+ pdata->phy_mode == FSL_USB2_PHY_ULPI)
+ iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL);
+
+
/*
* Enable UTMI phy and program PTS field in UTMI mode before asserting
* controller reset for USB Controller version 2.5
@@ -143,16 +260,20 @@ static int fsl_ehci_drv_probe(struct pla
/* Don't need to set host mode here. It will be done by tdi_reset() */
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_NO_SUSPEND);
if (retval != 0)
goto err2;
device_wakeup_enable(hcd->self.controller);
-#ifdef CONFIG_USB_OTG
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+ INIT_WORK(&ehci->change_hcd_work, do_change_hcd);
+
dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
hcd, ehci, hcd->usb_phy);
@@ -168,6 +289,11 @@ static int fsl_ehci_drv_probe(struct pla
retval = -ENODEV;
goto err2;
}
+
+ ehci_fsl->have_hcd = 1;
+ } else {
+ dev_err(&pdev->dev, "wrong operating mode\n");
+ return -ENODEV;
}
#endif
return retval;
@@ -181,6 +307,17 @@ static int fsl_ehci_drv_probe(struct pla
return retval;
}
+static bool usb_phy_clk_valid(struct usb_hcd *hcd)
+{
+ void __iomem *non_ehci = hcd->regs;
+ bool ret = true;
+
+ if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID))
+ ret = false;
+
+ return ret;
+}
+
static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
enum fsl_usb2_phy_modes phy_mode,
unsigned int port_offset)
@@ -219,6 +356,21 @@ static int ehci_fsl_setup_phy(struct usb
/* fall through */
case FSL_USB2_PHY_UTMI:
case FSL_USB2_PHY_UTMI_DUAL:
+ if (pdata->has_fsl_erratum_a006918) {
+ pr_warn("fsl-ehci: USB PHY clock invalid\n");
+ return -EINVAL;
+ }
+
+ /* PHY_CLK_VALID bit is de-featured from all controller
+ * versions below 2.4 and is to be checked only for
+ * internal UTMI phy
+ */
+ if (pdata->controller_ver > FSL_USB_VER_2_4 &&
+ pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) {
+ pr_err("fsl-ehci: USB PHY clock invalid\n");
+ return -EINVAL;
+ }
+
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
@@ -295,14 +447,9 @@ static int ehci_fsl_usb_setup(struct ehc
return -EINVAL;
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
- unsigned int chip, rev, svr;
-
- svr = mfspr(SPRN_SVR);
- chip = svr >> 16;
- rev = (svr >> 4) & 0xf;
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
- if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
+ if (pdata->has_fsl_erratum_14 == 1)
ehci->has_fsl_port_bug = 1;
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
@@ -382,16 +529,56 @@ static int ehci_fsl_setup(struct usb_hcd
return retval;
}
-struct ehci_fsl {
- struct ehci_hcd ehci;
-
#ifdef CONFIG_PM
- /* Saved USB PHY settings, need to restore after deep sleep. */
- u32 usb_ctrl;
-#endif
-};
+void __iomem *phy_reg;
-#ifdef CONFIG_PM
+#ifdef CONFIG_PPC
+/* save usb registers */
+static int ehci_fsl_save_context(struct usb_hcd *hcd)
+{
+ struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ void __iomem *non_ehci = hcd->regs;
+ struct device *dev = hcd->self.controller;
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata->phy_mode == FSL_USB2_PHY_UTMI_DUAL) {
+ phy_reg = ioremap(FSL_USB_PHY_ADDR,
+ sizeof(struct ccsr_usb_phy));
+ _memcpy_fromio((void *)&ehci_fsl->saved_phy_regs, phy_reg,
+ sizeof(struct ccsr_usb_phy));
+ }
+
+ _memcpy_fromio((void *)&ehci_fsl->saved_regs, ehci->regs,
+ sizeof(struct ehci_regs));
+ ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+
+ return 0;
+}
+
+/*Restore usb registers */
+static int ehci_fsl_restore_context(struct usb_hcd *hcd)
+{
+ struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ void __iomem *non_ehci = hcd->regs;
+ struct device *dev = hcd->self.controller;
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata->phy_mode == FSL_USB2_PHY_UTMI_DUAL) {
+ if (phy_reg)
+ _memcpy_toio(phy_reg,
+ (void *)&ehci_fsl->saved_phy_regs,
+ sizeof(struct ccsr_usb_phy));
+ }
+
+ _memcpy_toio(ehci->regs, (void *)&ehci_fsl->saved_regs,
+ sizeof(struct ehci_regs));
+ iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL);
+
+ return 0;
+}
+#endif
#ifdef CONFIG_PPC_MPC512x
static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
@@ -538,26 +725,45 @@ static inline int ehci_fsl_mpc512x_drv_r
}
#endif /* CONFIG_PPC_MPC512x */
-static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- return container_of(ehci, struct ehci_fsl, ehci);
-}
-
static int ehci_fsl_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
void __iomem *non_ehci = hcd->regs;
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
+ struct usb_bus host = hcd->self;
+#endif
+
+#ifdef CONFIG_PPC
+ suspend_state_t pm_state;
+ /* FIXME:Need to port fsl_pm.h before enable below code. */
+ /*pm_state = pm_suspend_state();*/
+ pm_state = PM_SUSPEND_MEM;
+
+if (pm_state == PM_SUSPEND_MEM)
+ ehci_fsl_save_context(hcd);
+#endif
if (of_device_is_compatible(dev->parent->of_node,
"fsl,mpc5121-usb2-dr")) {
return ehci_fsl_mpc512x_drv_suspend(dev);
}
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
+ if (host.is_otg) {
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ /* remove hcd */
+ ehci_fsl->hcd_add = 0;
+ schedule_work(&ehci->change_hcd_work);
+ host.is_otg = 0;
+ return 0;
+ }
+#endif
+
ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
device_may_wakeup(dev));
+
if (!fsl_deep_sleep())
return 0;
@@ -571,12 +777,36 @@ static int ehci_fsl_drv_resume(struct de
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
void __iomem *non_ehci = hcd->regs;
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
+ struct usb_bus host = hcd->self;
+#endif
+
+#ifdef CONFIG_PPC
+ suspend_state_t pm_state;
+ /* FIXME:Need to port fsl_pm.h before enable below code.*/
+ /* pm_state = pm_suspend_state(); */
+ pm_state = PM_SUSPEND_MEM;
+
+ if (pm_state == PM_SUSPEND_MEM)
+ ehci_fsl_restore_context(hcd);
+#endif
if (of_device_is_compatible(dev->parent->of_node,
"fsl,mpc5121-usb2-dr")) {
return ehci_fsl_mpc512x_drv_resume(dev);
}
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
+ if (host.is_otg) {
+ /* add hcd */
+ ehci_fsl->hcd_add = 1;
+ schedule_work(&ehci->change_hcd_work);
+ usb_hcd_resume_root_hub(hcd);
+ host.is_otg = 0;
+ return 0;
+ }
+#endif
+
ehci_prepare_ports_for_controller_resume(ehci);
if (!fsl_deep_sleep())
return 0;
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -63,4 +63,7 @@
#define UTMI_PHY_EN (1<<9)
#define ULPI_PHY_CLK_SEL (1<<10)
#define PHY_CLK_VALID (1<<17)
+
+/* Retry count for checking UTMI PHY CLK validity */
+#define UTMI_PHY_CLK_VALID_CHK_RETRY 5
#endif /* _EHCI_FSL_H */
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -304,6 +304,8 @@ static int ehci_bus_suspend (struct usb_
USB_PORT_STAT_HIGH_SPEED)
fs_idle_delay = true;
ehci_writel(ehci, t2, reg);
+ if (ehci_has_fsl_susp_errata(ehci))
+ usleep_range(10000, 20000);
changed = 1;
}
}
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -180,6 +180,9 @@ struct ehci_hcd { /* one per controlle
unsigned periodic_count; /* periodic activity count */
unsigned uframe_periodic_max; /* max periodic time per uframe */
+#if defined(CONFIG_FSL_USB2_OTG) || defined(CONFIG_FSL_USB2_OTG_MODULE)
+ struct work_struct change_hcd_work;
+#endif
/* list of itds & sitds completed while now_frame was still active */
struct list_head cached_itd_list;
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -232,6 +232,17 @@ static int fsl_usb2_mph_dr_of_probe(stru
pdata->has_fsl_erratum_a005697 =
of_property_read_bool(np, "fsl,usb_erratum-a005697");
+ if (of_get_property(np, "fsl,erratum_a006918", NULL))
+ pdata->has_fsl_erratum_a006918 = 1;
+ else
+ pdata->has_fsl_erratum_a006918 = 0;
+
+ if (of_get_property(np, "fsl,usb_erratum_14", NULL))
+ pdata->has_fsl_erratum_14 = 1;
+ else
+ pdata->has_fsl_erratum_14 = 0;
+
+
/*
* Determine whether phy_clk_valid needs to be checked
* by reading property in device tree
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -689,12 +689,34 @@ void xhci_set_link_state(struct xhci_hcd
int port_id, u32 link_state)
{
u32 temp;
+ u32 portpmsc_u2_backup = 0;
+
+ /* Backup U2 timeout info before initiating U3 entry erratum A-010131 */
+ if (xhci->shared_hcd->speed >= HCD_USB3 &&
+ link_state == USB_SS_PORT_LS_U3 &&
+ (xhci->quirks & XHCI_DIS_U1U2_WHEN_U3)) {
+ portpmsc_u2_backup = readl(port_array[port_id] + PORTPMSC);
+ portpmsc_u2_backup &= PORT_U2_TIMEOUT_MASK;
+ temp = readl(port_array[port_id] + PORTPMSC);
+ temp |= PORT_U2_TIMEOUT_MASK;
+ writel(temp, port_array[port_id] + PORTPMSC);
+ }
temp = readl(port_array[port_id]);
temp = xhci_port_state_to_neutral(temp);
temp &= ~PORT_PLS_MASK;
temp |= PORT_LINK_STROBE | link_state;
writel(temp, port_array[port_id]);
+
+ /* Restore U2 timeout info after U3 entry complete */
+ if (xhci->shared_hcd->speed >= HCD_USB3 &&
+ link_state == USB_SS_PORT_LS_U3 &&
+ (xhci->quirks & XHCI_DIS_U1U2_WHEN_U3)) {
+ temp = readl(port_array[port_id] + PORTPMSC);
+ temp &= ~PORT_U2_TIMEOUT_MASK;
+ temp |= portpmsc_u2_backup;
+ writel(temp, port_array[port_id] + PORTPMSC);
+ }
}
static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -263,8 +263,22 @@ static int xhci_plat_probe(struct platfo
goto disable_clk;
}
- if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
+ if (device_property_read_bool(sysdev, "usb3-lpm-capable")) {
xhci->quirks |= XHCI_LPM_SUPPORT;
+ if (device_property_read_bool(sysdev,
+ "snps,dis-u1u2-when-u3-quirk"))
+ xhci->quirks |= XHCI_DIS_U1U2_WHEN_U3;
+ }
+
+ if (device_property_read_bool(&pdev->dev, "quirk-reverse-in-out"))
+ xhci->quirks |= XHCI_REVERSE_IN_OUT;
+
+ if (device_property_read_bool(&pdev->dev,
+ "quirk-stop-transfer-in-block"))
+ xhci->quirks |= XHCI_STOP_TRANSFER_IN_BLOCK;
+
+ if (device_property_read_bool(&pdev->dev, "quirk-stop-ep-in-u1"))
+ xhci->quirks |= XHCI_STOP_EP_IN_U1;
if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
xhci->quirks |= XHCI_BROKEN_PORT_PED;
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1983,10 +1983,12 @@ static int finish_td(struct xhci_hcd *xh
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status)
{
+ struct xhci_dequeue_state deq_state;
struct xhci_virt_device *xdev;
struct xhci_ep_ctx *ep_ctx;
struct xhci_ring *ep_ring;
unsigned int slot_id;
+ u32 remaining;
u32 trb_comp_code;
int ep_index;
@@ -2009,14 +2011,30 @@ static int finish_td(struct xhci_hcd *xh
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
- /* Issue a reset endpoint command to clear the host side
- * halt, followed by a set dequeue command to move the
- * dequeue pointer past the TD.
- * The class driver clears the device side halt later.
+ /*erratum A-007463:
+ *After transaction error, controller switches control transfer
+ *data stage from IN to OUT direction.
*/
- xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
+ remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+ if (remaining && xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code) &&
+ (xhci->quirks & XHCI_REVERSE_IN_OUT)) {
+ memset(&deq_state, 0, sizeof(deq_state));
+ xhci_find_new_dequeue_state(xhci, slot_id,
+ ep_index, td->urb->stream_id, td, &deq_state);
+ xhci_queue_new_dequeue_state(xhci, slot_id, ep_index,
+ &deq_state);
+ xhci_ring_cmd_db(xhci);
+ } else {
+ /* Issue a reset endpoint command to clear the host side
+ * halt, followed by a set dequeue command to move the
+ * dequeue pointer past the TD.
+ * The class driver clears the device side halt later.
+ */
+ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, ep_trb,
EP_HARD_RESET);
+ }
} else {
/* Update ring dequeue pointer */
while (ep_ring->dequeue != td->last_trb)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1605,13 +1605,38 @@ static int xhci_urb_dequeue(struct usb_h
ret = -ENOMEM;
goto done;
}
- ep->ep_state |= EP_STOP_CMD_PENDING;
- ep->stop_cmd_timer.expires = jiffies +
+ /*
+ *erratum A-009611: Issuing an End Transfer command on an IN
+ *endpoint. when a transfer is in progress on USB blocks the
+ *transmission.
+ *Workaround: Software must wait for all existing TRBs to
+ *complete before issuing End transfer command.
+ */
+ if ((ep_ring->enqueue == ep_ring->dequeue &&
+ (xhci->quirks & XHCI_STOP_TRANSFER_IN_BLOCK)) ||
+ !(xhci->quirks & XHCI_STOP_TRANSFER_IN_BLOCK)) {
+ ep->ep_state |= EP_STOP_CMD_PENDING;
+ ep->stop_cmd_timer.expires = jiffies +
XHCI_STOP_EP_CMD_TIMEOUT * HZ;
- add_timer(&ep->stop_cmd_timer);
- xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id,
- ep_index, 0);
- xhci_ring_cmd_db(xhci);
+ add_timer(&ep->stop_cmd_timer);
+ xhci_queue_stop_endpoint(xhci, command,
+ urb->dev->slot_id,
+ ep_index, 0);
+ xhci_ring_cmd_db(xhci);
+ }
+
+ /*
+ *erratum A-009668: Stop Endpoint Command does not complete.
+ *Workaround: Instead of issuing a Stop Endpoint Command,
+ *issue a Disable Slot Command with the corresponding slot ID.
+ *Alternately, you can issue an Address Device Command with
+ *BSR=1
+ */
+ if ((urb->dev->speed <= USB_SPEED_HIGH) &&
+ (xhci->quirks & XHCI_STOP_EP_IN_U1)) {
+ xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT,
+ urb->dev->slot_id);
+ }
}
done:
spin_unlock_irqrestore(&xhci->lock, flags);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1794,7 +1794,7 @@ struct xhci_hcd {
#define XHCI_STATE_DYING (1 << 0)
#define XHCI_STATE_HALTED (1 << 1)
#define XHCI_STATE_REMOVING (1 << 2)
- unsigned long long quirks;
+ unsigned long long quirks;
#define XHCI_LINK_TRB_QUIRK BIT_ULL(0)
#define XHCI_RESET_EP_QUIRK BIT_ULL(1)
#define XHCI_NEC_HOST BIT_ULL(2)
@@ -1830,6 +1830,9 @@ struct xhci_hcd {
#define XHCI_SSIC_PORT_UNUSED BIT_ULL(22)
#define XHCI_NO_64BIT_SUPPORT BIT_ULL(23)
#define XHCI_MISSING_CAS BIT_ULL(24)
+#define XHCI_REVERSE_IN_OUT BIT(32)
+#define XHCI_STOP_TRANSFER_IN_BLOCK BIT(33)
+#define XHCI_STOP_EP_IN_U1 BIT(34)
/* For controller with a broken Port Disable implementation */
#define XHCI_BROKEN_PORT_PED BIT_ULL(25)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26)
@@ -1838,8 +1841,9 @@ struct xhci_hcd {
#define XHCI_HW_LPM_DISABLE BIT_ULL(29)
#define XHCI_SUSPEND_DELAY BIT_ULL(30)
#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
-#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
-#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
+#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(35)
+#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(36)
+#define XHCI_DIS_U1U2_WHEN_U3 BIT(37)
unsigned int num_active_eps;
unsigned int limit_active_eps;
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
*
* Author: Li Yang <LeoLi@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
@@ -470,6 +470,7 @@ void otg_reset_controller(void)
int fsl_otg_start_host(struct otg_fsm *fsm, int on)
{
struct usb_otg *otg = fsm->otg;
+ struct usb_bus *host = otg->host;
struct device *dev;
struct fsl_otg *otg_dev =
container_of(otg->usb_phy, struct fsl_otg, phy);
@@ -493,6 +494,7 @@ int fsl_otg_start_host(struct otg_fsm *f
otg_reset_controller();
VDBG("host on......\n");
if (dev->driver->pm && dev->driver->pm->resume) {
+ host->is_otg = 1;
retval = dev->driver->pm->resume(dev);
if (fsm->id) {
/* default-b */
@@ -517,8 +519,11 @@ int fsl_otg_start_host(struct otg_fsm *f
else {
VDBG("host off......\n");
if (dev && dev->driver) {
- if (dev->driver->pm && dev->driver->pm->suspend)
+ if (dev->driver->pm &&
+ dev->driver->pm->suspend) {
+ host->is_otg = 1;
retval = dev->driver->pm->suspend(dev);
+ }
if (fsm->id)
/* default-b */
fsl_otg_drv_vbus(fsm, 0);
@@ -546,8 +551,17 @@ int fsl_otg_start_gadget(struct otg_fsm
dev = otg->gadget->dev.parent;
if (on) {
- if (dev->driver->resume)
+ /* Delay gadget resume to synchronize between host and gadget
+ * drivers. Upon role-reversal host drv is shutdown by kernel
+ * worker thread. By the time host drv shuts down, controller
+ * gets programmed for gadget role. Shutting host drv after
+ * this results in controller getting reset, and it stops
+ * responding to otg events
+ */
+ if (dev->driver->resume) {
+ msleep(1000);
dev->driver->resume(dev);
+ }
} else {
if (dev->driver->suspend)
dev->driver->suspend(dev, otg_suspend_state);
@@ -668,6 +682,10 @@ static void fsl_otg_event(struct work_st
fsl_otg_start_host(fsm, 0);
otg_drv_vbus(fsm, 0);
fsl_otg_start_gadget(fsm, 1);
+ } else {
+ fsl_otg_start_gadget(fsm, 0);
+ otg_drv_vbus(fsm, 1);
+ fsl_otg_start_host(fsm, 1);
}
}
@@ -720,6 +738,7 @@ irqreturn_t fsl_otg_isr(int irq, void *d
{
struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
+ struct fsl_otg *otg_dev = dev_id;
u32 otg_int_src, otg_sc;
otg_sc = fsl_readl(&usb_dr_regs->otgsc);
@@ -749,18 +768,8 @@ irqreturn_t fsl_otg_isr(int irq, void *d
otg->gadget->is_a_peripheral = !fsm->id;
VDBG("ID int (ID is %d)\n", fsm->id);
- if (fsm->id) { /* switch to gadget */
- schedule_delayed_work(
- &((struct fsl_otg *)dev_id)->otg_event,
- 100);
- } else { /* switch to host */
- cancel_delayed_work(&
- ((struct fsl_otg *)dev_id)->
- otg_event);
- fsl_otg_start_gadget(fsm, 0);
- otg_drv_vbus(fsm, 1);
- fsl_otg_start_host(fsm, 1);
- }
+ schedule_delayed_work(&otg_dev->otg_event, 100);
+
return IRQ_HANDLED;
}
}
@@ -920,12 +929,32 @@ int usb_otg_start(struct platform_device
temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
switch (pdata->phy_mode) {
case FSL_USB2_PHY_ULPI:
+ if (pdata->controller_ver) {
+ /* controller version 1.6 or above */
+ setbits32(&p_otg->dr_mem_map->control,
+ USB_CTRL_ULPI_PHY_CLK_SEL);
+ /*
+ * Due to controller issue of PHY_CLK_VALID in ULPI
+ * mode, we set USB_CTRL_USB_EN before checking
+ * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work.
+ */
+ clrsetbits_be32(&p_otg->dr_mem_map->control,
+ USB_CTRL_UTMI_PHY_EN, USB_CTRL_IOENB);
+ }
temp |= PORTSC_PTS_ULPI;
break;
case FSL_USB2_PHY_UTMI_WIDE:
temp |= PORTSC_PTW_16BIT;
/* fall through */
case FSL_USB2_PHY_UTMI:
+ if (pdata->controller_ver) {
+ /* controller version 1.6 or above */
+ setbits32(&p_otg->dr_mem_map->control,
+ USB_CTRL_UTMI_PHY_EN);
+ /* Delay for UTMI PHY CLK to become stable - 10ms */
+ mdelay(FSL_UTMI_PHY_DLY);
+ }
+ setbits32(&p_otg->dr_mem_map->control, USB_CTRL_UTMI_PHY_EN);
temp |= PORTSC_PTS_UTMI;
/* fall through */
default:
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -199,6 +199,14 @@
/* control Register Bit Masks */
#define USB_CTRL_IOENB (0x1<<2)
#define USB_CTRL_ULPI_INT0EN (0x1<<0)
+#define USB_CTRL_WU_INT_EN (0x1<<1)
+#define USB_CTRL_LINE_STATE_FILTER__EN (0x1<<3)
+#define USB_CTRL_KEEP_OTG_ON (0x1<<4)
+#define USB_CTRL_OTG_PORT (0x1<<5)
+#define USB_CTRL_PLL_RESET (0x1<<8)
+#define USB_CTRL_UTMI_PHY_EN (0x1<<9)
+#define USB_CTRL_ULPI_PHY_CLK_SEL (0x1<<10)
+#define USB_CTRL_PHY_CLK_VALID (0x1<<17)
/* BCSR5 */
#define BCSR5_INT_USB (0x02)
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -432,6 +432,7 @@ struct usb_bus {
* for control transfers?
*/
u8 otg_port; /* 0, or number of OTG/HNP port */
+ unsigned is_otg:1; /* true when host is also otg */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
unsigned no_stop_on_short:1; /*
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -11,6 +11,8 @@
#include <linux/usb/otg.h>
#include <linux/usb/phy.h>
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+
#if IS_ENABLED(CONFIG_OF)
enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0);
bool of_usb_host_tpl_support(struct device_node *np);
Reference in New Issue View Git Blame Copy Permalink