openwrt/target
Maxim Anisimov 5a4eb56a7b mediatek/filogic: add Keenetic KN-3911 support
Specification:
 - MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX)
 - 512MB RAM
 - 128MB SPI NAND
 - 2 LEDs (green, orange)
 - 3 buttons (fn, reset, wps)
 - 2 2.5Gbit ethernet ports based on Airoha EN8811H phy

Serial Interface:
 - 3 Pins GND, RX, TX
 - Settings: 115200, 8N1

Notes:
 - The device supports dual boot mode

Flash instruction:
The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.1.2/24 and tftp server.
2. Rename "openwrt-mediatek-filogic-keenetic_kn-3911-squashfs-factory.bin"
   to "KN-3911_recovery.bin" and place it in tftp server directory.
3. Connect PC with ethernet port, press the reset button, power up
   the device and keep button pressed until status led start blinking.
4. Device will download file from server, write it to flash and reboot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16830
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-28 22:33:21 +01:00
..
imagebuilder imagebuilder: fix OPKG package_whatdepends support 2024-11-20 09:49:21 +01:00
linux mediatek/filogic: add Keenetic KN-3911 support 2024-11-28 22:33:21 +01:00
llvm-bpf build: use zstd for IB, toolchain, SDK and LLVM compression 2024-04-13 08:05:04 +02:00
sdk sdk: bundle libraries for llvm toolchain 2024-10-19 20:43:54 +02:00
toolchain build: use zstd for IB, toolchain, SDK and LLVM compression 2024-04-13 08:05:04 +02:00
Config.in loongarch64: new target 2024-05-04 14:14:16 +08:00
Makefile build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies 2024-03-03 23:13:59 +01:00