mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
11a5128b98
Qxwlan E750A v4 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 5G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
(cherry picked from commit ac03d51a3f)
123 lines
3.1 KiB
C
123 lines
3.1 KiB
C
/*
|
|
* Qxwlan E750A v4 board support
|
|
*
|
|
* Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
|
|
#define E750A_V4_GPIO_LED_SYS 14
|
|
#define E750A_V4_GPIO_LED_LAN 19
|
|
#define E750A_V4_GPIO_LED_WAN 18
|
|
#define E750A_V4_GPIO_LED_DS10 15
|
|
#define E750A_V4_GPIO_LED_DS20 20
|
|
#define E750A_V4_GPIO_LED_WLAN 21
|
|
|
|
#define E750A_V4_GPIO_BTN_RESET 12
|
|
|
|
#define E750A_V4_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define E750A_V4_KEYS_DEBOUNCE_INTERVAL (3 * E750A_V4_KEYS_POLL_INTERVAL)
|
|
|
|
static struct gpio_led e750a_v4_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "e750a-v4:green:system",
|
|
.gpio = E750A_V4_GPIO_LED_SYS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750a-v4:green:lan",
|
|
.gpio = E750A_V4_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750a-v4:green:wan",
|
|
.gpio = E750A_V4_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750a-v4:green:wlan",
|
|
.gpio = E750A_V4_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750a-v4:green:ds10",
|
|
.gpio = E750A_V4_GPIO_LED_DS10,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "e750a-v4:green:ds20",
|
|
.gpio = E750A_V4_GPIO_LED_DS20,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button e750a_v4_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = E750A_V4_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = E750A_V4_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
|
|
static void __init e750a_v4_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(e750a_v4_leds_gpio),
|
|
e750a_v4_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, E750A_V4_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(e750a_v4_gpio_keys),
|
|
e750a_v4_gpio_keys);
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
|
|
/* GMAC1 is connected to the internal switch */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
|
|
ath79_register_eth(1);
|
|
|
|
/* GMAC0 is connected to the PHY4 of the internal switch */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = BIT(4);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_pci();
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art, NULL);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_E750A_V4, "E750A-V4", "Qxlan E750A v4",
|
|
e750a_v4_setup);
|