mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
eca9068815
Fix for default button states in WRT1900AC dts files. This prevents overlay wipe when reset is pressed. Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> SVN-Revision: 46530
389 lines
9.2 KiB
Diff
389 lines
9.2 KiB
Diff
From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001
|
|
From: Imre Kaloz <kaloz@openwrt.org>
|
|
Date: Mon, 16 Feb 2015 13:31:04 +0100
|
|
Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support
|
|
|
|
The Linksys WRT1900AC (Mamba) is a router that has
|
|
|
|
- 2 mini-PCIe slots with Marvell 88W8864 radios
|
|
- 1 USB 3.0 port
|
|
- 1 USB 2.0/eSATAp port
|
|
- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN)
|
|
- 128MB NAND flash
|
|
- 256MB RAM
|
|
|
|
gregory.clement@free-electrons.com: - add ARM to the title
|
|
- fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE
|
|
- fix the unbalanced comment for the syscfg partition
|
|
|
|
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
|
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++
|
|
2 files changed, 349 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -629,6 +629,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
|
|
armada-xp-db.dtb \
|
|
armada-xp-gp.dtb \
|
|
armada-xp-lenovo-ix4-300d.dtb \
|
|
+ armada-xp-linksys-mamba.dtb \
|
|
armada-xp-matrix.dtb \
|
|
armada-xp-netgear-rn2120.dtb \
|
|
armada-xp-openblocks-ax3-4.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
|
|
@@ -0,0 +1,348 @@
|
|
+/*
|
|
+ * Device Tree file for the Linksys WRT1900AC (Mamba).
|
|
+ *
|
|
+ * Note: this board is shipped with a new generation boot loader that
|
|
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
|
|
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
|
|
+ * used.
|
|
+ *
|
|
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
|
|
+ *
|
|
+ * Based on armada-xp-axpwifiap.dts:
|
|
+ *
|
|
+ * Copyright (C) 2013 Marvell
|
|
+ *
|
|
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
+ *
|
|
+ * This file is dual-licensed: you can use it either under the terms
|
|
+ * of the GPL or the X11 license, at your option. Note that this dual
|
|
+ * licensing only applies to this file, and not this project as a
|
|
+ * whole.
|
|
+ *
|
|
+ * a) This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without
|
|
+ * any warranty of any kind, whether express or implied.
|
|
+ *
|
|
+ * Or, alternatively,
|
|
+ *
|
|
+ * b) Permission is hereby granted, free of charge, to any person
|
|
+ * obtaining a copy of this software and associated documentation
|
|
+ * files (the "Software"), to deal in the Software without
|
|
+ * restriction, including without limitation the rights to use,
|
|
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
|
+ * sell copies of the Software, and to permit persons to whom the
|
|
+ * Software is furnished to do so, subject to the following
|
|
+ * conditions:
|
|
+ *
|
|
+ * The above copyright notice and this permission notice shall be
|
|
+ * included in all copies or substantial portions of the Software.
|
|
+ *
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
+ * OTHER DEALINGS IN THE SOFTWARE.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+#include "armada-xp-mv78230.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Linksys WRT1900AC";
|
|
+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
|
|
+ "marvell,armadaxp", "marvell,armada-370-xp";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200";
|
|
+ stdout-path = &uart0;
|
|
+ };
|
|
+
|
|
+ memory {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
|
|
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
|
|
+
|
|
+ pcie-controller {
|
|
+ status = "okay";
|
|
+
|
|
+ /* Etron EJ168 USB 3.0 controller */
|
|
+ pcie@1,0 {
|
|
+ /* Port 0, Lane 0 */
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ /* First mini-PCIe port */
|
|
+ pcie@2,0 {
|
|
+ /* Port 0, Lane 1 */
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ /* Second mini-PCIe port */
|
|
+ pcie@3,0 {
|
|
+ /* Port 0, Lane 3 */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ internal-regs {
|
|
+
|
|
+ /* J10: VCC, NC, RX, NC, TX, GND */
|
|
+ serial@12000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ sata@a0000 {
|
|
+ nr-ports = <1>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ ethernet@70000 {
|
|
+ pinctrl-0 = <&ge0_rgmii_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+ phy-mode = "rgmii-id";
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ethernet@74000 {
|
|
+ pinctrl-0 = <&ge1_rgmii_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+ phy-mode = "rgmii-id";
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* USB part of the eSATA/USB 2.0 port */
|
|
+ usb@50000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ i2c@11000 {
|
|
+ status = "okay";
|
|
+ clock-frequency = <100000>;
|
|
+
|
|
+ tmp421@4c {
|
|
+ compatible = "ti,tmp421";
|
|
+ reg = <0x4c>;
|
|
+ };
|
|
+
|
|
+ tlc59116@68 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ #gpio-cells = <2>;
|
|
+ compatible = "ti,tlc59116";
|
|
+ reg = <0x68>;
|
|
+
|
|
+ wan_amber@0 {
|
|
+ label = "mamba:amber:wan";
|
|
+ reg = <0x0>;
|
|
+ };
|
|
+
|
|
+ wan_white@1 {
|
|
+ label = "mamba:white:wan";
|
|
+ reg = <0x1>;
|
|
+ };
|
|
+
|
|
+ wlan_2g@2 {
|
|
+ label = "mamba:white:wlan_2g";
|
|
+ reg = <0x2>;
|
|
+ };
|
|
+
|
|
+ wlan_5g@3 {
|
|
+ label = "mamba:white:wlan_5g";
|
|
+ reg = <0x3>;
|
|
+ };
|
|
+
|
|
+ esata@4 {
|
|
+ label = "mamba:white:esata";
|
|
+ reg = <0x4>;
|
|
+ };
|
|
+
|
|
+ usb2@5 {
|
|
+ label = "mamba:white:usb2";
|
|
+ reg = <0x5>;
|
|
+ };
|
|
+
|
|
+ usb3_1@6 {
|
|
+ label = "mamba:white:usb3_1";
|
|
+ reg = <0x6>;
|
|
+ };
|
|
+
|
|
+ usb3_2@7 {
|
|
+ label = "mamba:white:usb3_2";
|
|
+ reg = <0x7>;
|
|
+ };
|
|
+
|
|
+ wps_white@8 {
|
|
+ label = "mamba:white:wps";
|
|
+ reg = <0x8>;
|
|
+ };
|
|
+
|
|
+ wps_amber@9 {
|
|
+ label = "mamba:amber:wps";
|
|
+ reg = <0x9>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ nand@d0000 {
|
|
+ status = "okay";
|
|
+ num-cs = <1>;
|
|
+ marvell,nand-keep-config;
|
|
+ marvell,nand-enable-arbiter;
|
|
+ nand-on-flash-bbt;
|
|
+ nand-ecc-strength = <4>;
|
|
+ nand-ecc-step-size = <512>;
|
|
+
|
|
+ partition@0 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x0000000 0x100000>; /* 1MB */
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition@100000 {
|
|
+ label = "u_env";
|
|
+ reg = <0x100000 0x40000>; /* 256KB */
|
|
+ };
|
|
+
|
|
+ partition@140000 {
|
|
+ label = "s_env";
|
|
+ reg = <0x140000 0x40000>; /* 256KB */
|
|
+ };
|
|
+
|
|
+ partition@900000 {
|
|
+ label = "devinfo";
|
|
+ reg = <0x900000 0x100000>; /* 1MB */
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ /* kernel1 overlaps with rootfs1 by design */
|
|
+ partition@a00000 {
|
|
+ label = "kernel1";
|
|
+ reg = <0xa00000 0x2800000>; /* 40MB */
|
|
+ };
|
|
+
|
|
+ partition@d00000 {
|
|
+ label = "rootfs1";
|
|
+ reg = <0xd00000 0x2500000>; /* 37MB */
|
|
+ };
|
|
+
|
|
+ /* kernel2 overlaps with rootfs2 by design */
|
|
+ partition@3200000 {
|
|
+ label = "kernel2";
|
|
+ reg = <0x3200000 0x2800000>; /* 40MB */
|
|
+ };
|
|
+
|
|
+ partition@3500000 {
|
|
+ label = "rootfs2";
|
|
+ reg = <0x3500000 0x2500000>; /* 37MB */
|
|
+ };
|
|
+
|
|
+ /*
|
|
+ * 38MB, last MB is for the BBT, not writable
|
|
+ */
|
|
+ partition@5a00000 {
|
|
+ label = "syscfg";
|
|
+ reg = <0x5a00000 0x2600000>;
|
|
+ };
|
|
+
|
|
+ /*
|
|
+ * Unused area between "s_env" and "devinfo".
|
|
+ * Moved here because otherwise the renumbered
|
|
+ * partitions would break the bootloader
|
|
+ * supplied bootargs
|
|
+ */
|
|
+ partition@180000 {
|
|
+ label = "unused_area";
|
|
+ reg = <0x180000 0x780000>; /* 7.5MB */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ spi0: spi@10600 {
|
|
+ status = "okay";
|
|
+
|
|
+ spi-flash@0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ compatible = "everspin,mr25h256";
|
|
+ reg = <0>; /* Chip select 0 */
|
|
+ spi-max-frequency = <40000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio_keys {
|
|
+ compatible = "gpio-keys";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ pinctrl-0 = <&keys_pin>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ button@1 {
|
|
+ label = "WPS";
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ button@2 {
|
|
+ label = "Factory Reset Button";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio-leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-0 = <&power_led_pin>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ power {
|
|
+ label = "mamba:white:power";
|
|
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
|
+ default-state = "on";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio_fan {
|
|
+ /* SUNON HA4010V4-0000-C99 */
|
|
+ compatible = "gpio-fan";
|
|
+ gpios = <&gpio0 24 0>;
|
|
+
|
|
+ gpio-fan,speed-map = <0 0
|
|
+ 4500 1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+
|
|
+ keys_pin: keys-pin {
|
|
+ marvell,pins = "mpp32", "mpp33";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ power_led_pin: power-led-pin {
|
|
+ marvell,pins = "mpp40";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ gpio_fan_pin: gpio-fan-pin {
|
|
+ marvell,pins = "mpp24";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+};
|