mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
9a495f6bbb
Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43564
369 lines
11 KiB
Diff
369 lines
11 KiB
Diff
--- a/drivers/spi/spi-rt2880.c
|
|
+++ b/drivers/spi/spi-rt2880.c
|
|
@@ -29,16 +29,17 @@
|
|
#define SPI_BPW_MASK(bits) BIT((bits) - 1)
|
|
|
|
#define DRIVER_NAME "spi-rt2880"
|
|
-/* only one slave is supported*/
|
|
-#define RALINK_NUM_CHIPSELECTS 1
|
|
/* in usec */
|
|
#define RALINK_SPI_WAIT_MAX_LOOP 2000
|
|
|
|
-#define RAMIPS_SPI_STAT 0x00
|
|
-#define RAMIPS_SPI_CFG 0x10
|
|
-#define RAMIPS_SPI_CTL 0x14
|
|
-#define RAMIPS_SPI_DATA 0x20
|
|
-#define RAMIPS_SPI_FIFO_STAT 0x38
|
|
+#define RAMIPS_SPI_DEV_OFFSET 0x40
|
|
+
|
|
+#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET))
|
|
+#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET))
|
|
+#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET))
|
|
+#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET))
|
|
+#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET))
|
|
+#define RAMIPS_SPI_ARBITER 0xF0
|
|
|
|
/* SPISTAT register bit field */
|
|
#define SPISTAT_BUSY BIT(0)
|
|
@@ -68,6 +69,10 @@
|
|
/* SPIFIFOSTAT register bit field */
|
|
#define SPIFIFOSTAT_TXFULL BIT(17)
|
|
|
|
+#define SPICTL_ARB_EN BIT(31)
|
|
+#define SPI1_POR BIT(1)
|
|
+#define SPI0_POR BIT(0)
|
|
+
|
|
#define MT7621_SPI_TRANS 0x00
|
|
#define SPITRANS_BUSY BIT(16)
|
|
#define MT7621_SPI_OPCODE 0x04
|
|
@@ -78,13 +83,16 @@
|
|
#define MT7621_SPI_MASTER 0x28
|
|
#define MT7621_SPI_SPACE 0x3c
|
|
|
|
+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
|
|
+
|
|
struct rt2880_spi;
|
|
|
|
struct rt2880_spi_ops {
|
|
void (*init_hw)(struct rt2880_spi *rs);
|
|
- void (*set_cs)(struct rt2880_spi *rs, int enable);
|
|
+ void (*set_cs)(struct spi_device *spi, int enable);
|
|
int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
|
|
unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
|
|
+ int num_cs;
|
|
};
|
|
|
|
struct rt2880_spi {
|
|
@@ -141,6 +149,7 @@ static inline void rt2880_spi_clrbits(st
|
|
|
|
static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
|
|
{
|
|
+ int cs = spi->chip_select;
|
|
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
u32 rate;
|
|
u32 prescale;
|
|
@@ -168,9 +177,9 @@ static int rt2880_spi_baudrate_set(struc
|
|
prescale = ilog2(rate / 2);
|
|
dev_dbg(&spi->dev, "prescale:%u\n", prescale);
|
|
|
|
- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
|
|
+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
|
|
reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
|
|
- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
|
|
rs->speed = speed;
|
|
return 0;
|
|
}
|
|
@@ -194,7 +203,8 @@ rt2880_spi_setup_transfer(struct spi_dev
|
|
{
|
|
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
unsigned int speed = spi->max_speed_hz;
|
|
- int rc;
|
|
+ int rc, cs = spi->chip_select;
|
|
+ u32 reg;
|
|
|
|
if ((t != NULL) && t->speed_hz)
|
|
speed = t->speed_hz;
|
|
@@ -206,19 +216,61 @@ rt2880_spi_setup_transfer(struct spi_dev
|
|
return rc;
|
|
}
|
|
|
|
+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
|
|
+
|
|
+ reg = (reg & ~SPICFG_MSBFIRST);
|
|
+ if (!(spi->mode & SPI_LSB_FIRST))
|
|
+ reg |= SPICFG_MSBFIRST;
|
|
+
|
|
+ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING));
|
|
+ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
|
|
+ case SPI_MODE_0:
|
|
+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
|
|
+ break;
|
|
+ case SPI_MODE_1:
|
|
+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
|
|
+ break;
|
|
+ case SPI_MODE_2:
|
|
+ reg |= SPICFG_RXCLKEDGE_FALLING;
|
|
+ break;
|
|
+ case SPI_MODE_3:
|
|
+ reg |= SPICFG_TXCLKEDGE_FALLING;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
|
|
+
|
|
+ reg = SPICTL_ARB_EN;
|
|
+ if (spi->mode & SPI_CS_HIGH) {
|
|
+ switch(cs) {
|
|
+ case 0:
|
|
+ reg |= SPI0_POR;
|
|
+ break;
|
|
+ case 1:
|
|
+ reg |= SPI1_POR;
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg);
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
-static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
|
|
+static void rt2880_spi_set_cs(struct spi_device *spi, int enable)
|
|
{
|
|
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
+ int cs = spi->chip_select;
|
|
+
|
|
if (enable)
|
|
- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
|
|
+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
|
|
else
|
|
- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
|
|
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
|
|
}
|
|
|
|
-static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
|
|
+static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
|
|
{
|
|
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
|
|
|
|
if (enable)
|
|
@@ -228,14 +280,16 @@ static void mt7621_spi_set_cs(struct rt2
|
|
rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
|
|
}
|
|
|
|
-static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
|
|
+static inline int rt2880_spi_wait_till_ready(struct spi_device *spi)
|
|
{
|
|
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
+ int cs = spi->chip_select;
|
|
int i;
|
|
|
|
for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
|
|
u32 status;
|
|
|
|
- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
|
|
+ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs));
|
|
if ((status & SPISTAT_BUSY) == 0)
|
|
return 0;
|
|
|
|
@@ -246,8 +300,9 @@ static inline int rt2880_spi_wait_till_r
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
-static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
|
|
+static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
|
|
{
|
|
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
int i;
|
|
|
|
for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
|
|
@@ -268,6 +323,7 @@ static unsigned int
|
|
rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
|
|
{
|
|
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
+ int cs = spi->chip_select;
|
|
unsigned count = 0;
|
|
u8 *rx = xfer->rx_buf;
|
|
const u8 *tx = xfer->tx_buf;
|
|
@@ -279,9 +335,9 @@ rt2880_spi_write_read(struct spi_device
|
|
|
|
if (tx) {
|
|
for (count = 0; count < xfer->len; count++) {
|
|
- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
|
|
- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
|
|
- err = rt2880_spi_wait_till_ready(rs);
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]);
|
|
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR);
|
|
+ err = rt2880_spi_wait_till_ready(spi);
|
|
if (err) {
|
|
dev_err(&spi->dev, "TX failed, err=%d\n", err);
|
|
goto out;
|
|
@@ -291,13 +347,13 @@ rt2880_spi_write_read(struct spi_device
|
|
|
|
if (rx) {
|
|
for (count = 0; count < xfer->len; count++) {
|
|
- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
|
|
- err = rt2880_spi_wait_till_ready(rs);
|
|
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD);
|
|
+ err = rt2880_spi_wait_till_ready(spi);
|
|
if (err) {
|
|
dev_err(&spi->dev, "RX failed, err=%d\n", err);
|
|
goto out;
|
|
}
|
|
- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
|
|
+ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs));
|
|
}
|
|
}
|
|
|
|
@@ -364,7 +420,7 @@ mt7621_spi_write_read(struct spi_device
|
|
trans |= SPI_CTL_START;
|
|
rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
|
|
|
|
- mt7621_spi_wait_till_ready(rs);
|
|
+ mt7621_spi_wait_till_ready(spi);
|
|
|
|
if (rx) {
|
|
u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
|
|
@@ -440,7 +496,7 @@ static int rt2880_spi_transfer_one_messa
|
|
}
|
|
|
|
if (!cs_active) {
|
|
- rs->ops->set_cs(rs, 1);
|
|
+ rs->ops->set_cs(spi, 1);
|
|
cs_active = 1;
|
|
}
|
|
|
|
@@ -451,14 +507,14 @@ static int rt2880_spi_transfer_one_messa
|
|
udelay(t->delay_usecs);
|
|
|
|
if (t->cs_change) {
|
|
- rs->ops->set_cs(rs, 0);
|
|
+ rs->ops->set_cs(spi, 0);
|
|
cs_active = 0;
|
|
}
|
|
}
|
|
|
|
msg_done:
|
|
if (cs_active)
|
|
- rs->ops->set_cs(rs, 0);
|
|
+ rs->ops->set_cs(spi, 0);
|
|
|
|
m->status = status;
|
|
spi_finalize_current_message(master);
|
|
@@ -471,7 +527,7 @@ static int rt2880_spi_setup(struct spi_d
|
|
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
|
|
|
|
if ((spi->max_speed_hz == 0) ||
|
|
- (spi->max_speed_hz > (rs->sys_freq / 2)))
|
|
+ (spi->max_speed_hz > (rs->sys_freq / 2)))
|
|
spi->max_speed_hz = (rs->sys_freq / 2);
|
|
|
|
if (spi->max_speed_hz < (rs->sys_freq / 128)) {
|
|
@@ -488,10 +544,25 @@ static int rt2880_spi_setup(struct spi_d
|
|
|
|
static void rt2880_spi_reset(struct rt2880_spi *rs)
|
|
{
|
|
- rt2880_spi_write(rs, RAMIPS_SPI_CFG,
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0),
|
|
SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
|
|
SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
|
|
- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA);
|
|
+}
|
|
+
|
|
+static void rt5350_spi_reset(struct rt2880_spi *rs)
|
|
+{
|
|
+ int cs;
|
|
+
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER,
|
|
+ SPICTL_ARB_EN);
|
|
+
|
|
+ for (cs = 0; cs < rs->ops->num_cs; cs++) {
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs),
|
|
+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
|
|
+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
|
|
+ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA);
|
|
+ }
|
|
}
|
|
|
|
static void mt7621_spi_reset(struct rt2880_spi *rs)
|
|
@@ -511,24 +582,33 @@ static struct rt2880_spi_ops spi_ops[] =
|
|
.set_cs = rt2880_spi_set_cs,
|
|
.baudrate_set = rt2880_spi_baudrate_set,
|
|
.write_read = rt2880_spi_write_read,
|
|
+ .num_cs = 1,
|
|
+ }, {
|
|
+ .init_hw = rt5350_spi_reset,
|
|
+ .set_cs = rt2880_spi_set_cs,
|
|
+ .baudrate_set = rt2880_spi_baudrate_set,
|
|
+ .write_read = rt2880_spi_write_read,
|
|
+ .num_cs = 2,
|
|
}, {
|
|
.init_hw = mt7621_spi_reset,
|
|
.set_cs = mt7621_spi_set_cs,
|
|
.baudrate_set = mt7621_spi_baudrate_set,
|
|
.write_read = mt7621_spi_write_read,
|
|
+ .num_cs = 1,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id rt2880_spi_match[] = {
|
|
{ .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
|
|
- { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
|
|
+ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]},
|
|
+ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[2] },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rt2880_spi_match);
|
|
|
|
static int rt2880_spi_probe(struct platform_device *pdev)
|
|
{
|
|
- const struct of_device_id *match;
|
|
+ const struct of_device_id *match;
|
|
struct spi_master *master;
|
|
struct rt2880_spi *rs;
|
|
unsigned long flags;
|
|
@@ -536,10 +616,12 @@ static int rt2880_spi_probe(struct platf
|
|
struct resource *r;
|
|
int status = 0;
|
|
struct clk *clk;
|
|
+ struct rt2880_spi_ops *ops;
|
|
|
|
- match = of_match_device(rt2880_spi_match, &pdev->dev);
|
|
+ match = of_match_device(rt2880_spi_match, &pdev->dev);
|
|
if (!match)
|
|
return -EINVAL;
|
|
+ ops = (struct rt2880_spi_ops *)match->data;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, r);
|
|
@@ -563,14 +645,13 @@ static int rt2880_spi_probe(struct platf
|
|
return -ENOMEM;
|
|
}
|
|
|
|
- /* we support only mode 0, and no options */
|
|
- master->mode_bits = 0;
|
|
+ master->mode_bits = RT2880_SPI_MODE_BITS;
|
|
|
|
master->setup = rt2880_spi_setup;
|
|
master->transfer_one_message = rt2880_spi_transfer_one_message;
|
|
- master->num_chipselect = RALINK_NUM_CHIPSELECTS;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8);
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
+ master->num_chipselect = ops->num_cs;
|
|
|
|
dev_set_drvdata(&pdev->dev, master);
|
|
|
|
@@ -579,7 +660,7 @@ static int rt2880_spi_probe(struct platf
|
|
rs->clk = clk;
|
|
rs->master = master;
|
|
rs->sys_freq = clk_get_rate(rs->clk);
|
|
- rs->ops = (struct rt2880_spi_ops *) match->data;
|
|
+ rs->ops = ops;
|
|
dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
|
|
spin_lock_irqsave(&rs->lock, flags);
|
|
|