mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
667f6c7f49
Manually rebased patches:
bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch
layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch
mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
Removed:
layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch
All modifications made by update_kernel.sh
Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
lantiq/Easybox 904 xDSL, x86_64
Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
259 lines
4.4 KiB
Diff
259 lines
4.4 KiB
Diff
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
|
|
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
|
|
@@ -53,6 +53,13 @@
|
|
};
|
|
};
|
|
|
|
+ gsw: gsw@0 {
|
|
+ compatible = "mediatek,mt753x";
|
|
+ mediatek,ethsys = <ðsys>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ };
|
|
+
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
@@ -146,6 +153,36 @@
|
|
};
|
|
};
|
|
|
|
+&gsw {
|
|
+ mediatek,mdio = <&mdio>;
|
|
+ mediatek,portmap = "wllll";
|
|
+ mediatek,mdio_master_pinmux = <0>;
|
|
+ reset-gpios = <&pio 54 0>;
|
|
+ interrupt-parent = <&pio>;
|
|
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "okay";
|
|
+
|
|
+ port5: port@5 {
|
|
+ compatible = "mediatek,mt753x-port";
|
|
+ reg = <5>;
|
|
+ phy-mode = "rgmii";
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ port6: port@6 {
|
|
+ compatible = "mediatek,mt753x-port";
|
|
+ reg = <6>;
|
|
+ phy-mode = "sgmii";
|
|
+ fixed-link {
|
|
+ speed = <2500>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
|
|
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
|
|
@@ -1,7 +1,6 @@
|
|
/*
|
|
- * Copyright (c) 2017 MediaTek Inc.
|
|
- * Author: Ming Huang <ming.huang@mediatek.com>
|
|
- * Sean Wang <sean.wang@mediatek.com>
|
|
+ * Copyright (c) 2018 MediaTek Inc.
|
|
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
|
|
*
|
|
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
*/
|
|
@@ -14,7 +13,7 @@
|
|
#include "mt6380.dtsi"
|
|
|
|
/ {
|
|
- model = "MediaTek MT7622 RFB1 board";
|
|
+ model = "MT7622_MT7531 RFB";
|
|
compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
|
|
|
|
aliases {
|
|
@@ -23,7 +22,7 @@
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
|
|
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
|
|
};
|
|
|
|
cpus {
|
|
@@ -40,23 +39,36 @@
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
- poll-interval = <100>;
|
|
|
|
factory {
|
|
label = "factory";
|
|
linux,code = <BTN_0>;
|
|
- gpios = <&pio 0 0>;
|
|
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
- gpios = <&pio 102 0>;
|
|
+ gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ green {
|
|
+ label = "bpi-r64:pio:green";
|
|
+ gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ red {
|
|
+ label = "bpi-r64:pio:red";
|
|
+ gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
- reg = <0 0x40000000 0 0x20000000>;
|
|
+ reg = <0 0x40000000 0 0x40000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
@@ -101,23 +113,82 @@
|
|
};
|
|
|
|
ð {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <ð_pins>;
|
|
status = "okay";
|
|
+ gmac0: mac@0 {
|
|
+ compatible = "mediatek,eth-mac";
|
|
+ reg = <0>;
|
|
+ phy-mode = "2500base-x";
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <2500>;
|
|
+ full-duplex;
|
|
+ pause;
|
|
+ };
|
|
+ };
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
- phy-handle = <&phy5>;
|
|
+ phy-mode = "rgmii";
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ pause;
|
|
+ };
|
|
};
|
|
|
|
- mdio-bus {
|
|
+ mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
- phy5: ethernet-phy@5 {
|
|
- reg = <5>;
|
|
- phy-mode = "sgmii";
|
|
+ switch@0 {
|
|
+ compatible = "mediatek,mt7531";
|
|
+ reg = <0>;
|
|
+ reset-gpios = <&pio 54 0>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ label = "lan1";
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan2";
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan3";
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "lan4";
|
|
+ };
|
|
+
|
|
+ port@4 {
|
|
+ reg = <4>;
|
|
+ label = "wan";
|
|
+ };
|
|
+
|
|
+ port@6 {
|
|
+ reg = <6>;
|
|
+ label = "cpu";
|
|
+ ethernet = <&gmac0>;
|
|
+ phy-mode = "2500base-x";
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <2500>;
|
|
+ full-duplex;
|
|
+ pause;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
};
|
|
};
|
|
};
|
|
@@ -185,15 +256,28 @@
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
- pinctrl-0 = <&pcie0_pins>;
|
|
+ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
|
|
status = "okay";
|
|
|
|
pcie@0,0 {
|
|
status = "okay";
|
|
};
|
|
+
|
|
+ pcie@1,0 {
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
|
|
&pio {
|
|
+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
|
|
+ * SATA functions. i.e. output-high: PCIe, output-low: SATA
|
|
+ */
|
|
+ asm_sel {
|
|
+ gpio-hog;
|
|
+ gpios = <90 GPIO_ACTIVE_HIGH>;
|
|
+ output-high;
|
|
+ };
|
|
+
|
|
/* eMMC is shared pin with parallel NAND */
|
|
emmc_pins_default: emmc-pins-default {
|
|
mux {
|
|
@@ -460,11 +544,11 @@
|
|
};
|
|
|
|
&sata {
|
|
- status = "okay";
|
|
+ status = "disable";
|
|
};
|
|
|
|
&sata_phy {
|
|
- status = "okay";
|
|
+ status = "disable";
|
|
};
|
|
|
|
&spi0 {
|