openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 13:48:06 +00:00

History

Yousong Zhou 54310a3aa0 malta: add kernel 5.4 config Copied from config-4.19 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>		2020-03-10 10:05:50 +08:00
..
base-files/etc	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00
be	malta: enable HighMem on MIPS32	2020-01-15 22:35:48 +01:00
be64	malta: Deactivate MIPS O32 and N32 support	2019-05-14 21:50:42 +02:00
image	malta: fix overlay support by updating to f2fs/ext4 based overlays	2019-06-25 14:12:22 +00:00
le	malta: enable HighMem on MIPS32	2020-01-15 22:35:48 +01:00
le64	malta: Deactivate MIPS O32 and N32 support	2019-05-14 21:50:42 +02:00
config-4.14	malta: remove CONFIG_LEGACY_PTY from kernel config	2019-12-09 20:16:53 +01:00
config-4.19	malta: remove CONFIG_LEGACY_PTY from kernel config	2019-12-09 20:16:53 +01:00
config-5.4	malta: add kernel 5.4 config	2020-03-10 10:05:50 +08:00
Makefile	treewide: Remove self from MAINTAINER entries	2019-12-23 13:18:04 -08:00
README	malta: fix image prefix names	2018-01-09 10:26:16 +01:00

README

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the 32 bit little-endian image:
qemu-system-mipsel -kernel bin/targets/malta/le/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the 32 bit big-endian image:
qemu-system-mips -kernel bin/targets/malta/be/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit little-endian image:
qemu-system-mips64el -kernel bin/targets/malta/le64/openwrt-malta-le64-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit big-endian image:
qemu-system-mips64 -kernel bin/targets/malta/be64/openwrt-malta-be64-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.