openwrt/target/linux/apm821xx/dts/meraki-mx60.dts
Rosen Penev 7754924c9e apm821xx: remove ethernet0 node
This is needed in order to get a MAC address from UBI.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16580
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-21 20:54:55 +02:00

457 lines
8.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree Source for Meraki MX60/MX60W (Buckminster)
*
* Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
*
* Based on Cisco Meraki DTS extracted from release wired-12-217818
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include "apm82181.dtsi"
/ {
model = "Meraki MX60/MX60W Security Appliance";
compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone";
aliases {
/* U-Boot env has a bad ethaddr MAC address that is sent to
* the kernel. The real MAC is in UBI */
/delete-property/ ethernet0;
serial0 = &UART1;
};
chosen {
stdout-path = "/plb/opb/serial@ef600400";
};
};
&CRYPTO {
status = "okay";
};
&PKA {
status = "okay";
};
&TRNG {
status = "okay";
};
&USBOTG0 {
status = "okay";
dr_mode = "host";
};
&ndfc {
/* Buckminster has 1GiB of NAND */
status = "okay";
nand {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x00100000 0x00100000>;
compatible = "u-boot,env";
read-only;
};
partition@200000 {
label = "oops";
reg = <0x00200000 0x00040000>;
};
partition@240000 {
compatible = "linux,ubi";
label = "ubi";
reg = <0x00240000 0x3fdc0000>;
volumes {
ubi-volume-board-config {
volname = "board-config";
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_board_66: macaddr@66 {
compatible = "mac-base";
reg = <0x66 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
};
};
};
};
&UART1 {
status = "okay";
};
&GPIO0 {
status = "okay";
};
&IIC0 {
status = "okay";
};
&EMAC0 {
status = "okay";
nvmem-cells = <&macaddr_board_66 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
compatible = "ethernet-phy-id004d.d034";
reg = <0>;
};
phy_port2: phy@1 {
compatible = "ethernet-phy-id004d.d034";
reg = <1>;
};
phy_port3: phy@2 {
compatible = "ethernet-phy-id004d.d034";
reg = <2>;
};
phy_port4: phy@3 {
compatible = "ethernet-phy-id004d.d034";
reg = <3>;
};
phy_port5: phy@4 {
compatible = "ethernet-phy-id004d.d034";
reg = <4>;
};
switch0@10 {
compatible = "qca,qca8327";
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ethernet = <&EMAC0>;
phy-mode = "rgmii-id";
tx-internal-delay-ps = <2000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port1>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_ORANGE>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
};
};
port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port2>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_ORANGE>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
};
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_ORANGE>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
};
};
port@4 {
reg = <4>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port4>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_ORANGE>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
};
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
nvmem-cells = <&macaddr_board_66 1>;
nvmem-cell-names = "mac-address";
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
function-enumerator = <0>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_ORANGE>;
function = LED_FUNCTION_WAN;
function-enumerator = <1>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
function-enumerator = <2>;
default-state = "keep";
};
};
};
};
};
};
};
&POB0 {
leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
};
led-1 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_FAULT;
gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led-2 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
};
led-3 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_WAN;
gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
};
led-4 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
};
led-5 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
};
led-6 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
};
led-7 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
button-restart {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
interrupt-parent = <&UIC1>;
interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
debounce-interval = <60>;
};
};
};
&PCIE0 {
/* Leave this enabled as u-boot on the MX60 will disable it for us */
status = "okay";
/*
* relevant lspci topology:
*
* -+-[0000:40]---00.0-[41-7f]----00.0
*/
bridge@64,0 {
reg = <0x00400000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@65,0 {
/* Atheros AR9380 2.4/5GHz */
compatible = "pci168c,0030";
reg = <0x00410000 0 0 0 0>;
interrupts = <1>; /* INTA */
};
};
};