openwrt/package/network/config/ltq-vdsl-app/Makefile
Andre Heider 5372205ca9 ltq-vdsl-app: add ubus support to get metrics
Add a 'dsl' ubus object with a 'metrics' function to replace the
expensive shell parsing done by /etc/init.d/dsl_control [dsl|luci]stat.

All metrics are gathered by using syscalls. An additional thread is started
to handle ubus events.

$ time /etc/init.d/dsl_control dslstat
real	0m 2.66s
user	0m 0.90s
sys	0m 1.76s

$ time ubus call dsl metrics
real	0m 0.02s
user	0m 0.00s
sys	0m 0.01s

Example output:
{
	"api_version": "4.17.18.6",
	"firmware_version": "5.8.1.5.0.7",
	"chipset": "Lantiq-VRX200",
	"driver_version": "1.5.17.6",
	"state": "Showtime with TC-Layer sync",
	"up": true,
	"uptime": 3891,
	"atu_c": {
		"vendor_id": [
			181,
			0,
			66,
			68,
			67,
			77,
			178,
			26
		],
		"vendor": "Broadcom 178.26",
		"system_vendor_id": [
			181,
			0,
			66,
			68,
			67,
			77,
			0,
			0
		],
		"system_vendor": "Broadcom",
		"version": [
			49,
			57,
			46,
			48,
			46,
			51,
			53,
			46,
			50,
			32,
			86,
			69,
			95,
			49,
			49,
			95
		],
		"serial": [
			65,
			65,
			49,
			52,
			52,
			54,
			70,
			69,
			48,
			90,
			87,
			45,
			48,
			56,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0,
			0
		]
	},
	"power_state": "L0 - Synchronized",
	"xtse": [
		0,
		0,
		0,
		0,
		0,
		0,
		0,
		2
	],
	"annex": "B",
	"standard": "G.993.2",
	"profile": "17a",
	"mode": "G.993.2 (VDSL2, Profile 17a, with down- and upstream vectoring)",
	"upstream": {
		"vector": true,
		"trellis": true,
		"bitswap": true,
		"retx": true,
		"virtual_noise": false,
		"interleave_delay": 0,
		"data_rate": 31999000,
		"latn": 8.500000,
		"satn": 8.400000,
		"snr": 12.700000,
		"actps": -90.100000,
		"actatp": 13.400000,
		"attndr": 37180000
	},
	"downstream": {
		"vector": true,
		"trellis": true,
		"bitswap": true,
		"retx": true,
		"virtual_noise": false,
		"interleave_delay": 140,
		"data_rate": 89998000,
		"latn": 9.500000,
		"satn": 9.600000,
		"snr": 13.300000,
		"actps": -90.100000,
		"actatp": -1.600000,
		"attndr": 116315372
	},
	"errors": {
		"near": {
			"es": 1,
			"ses": 0,
			"loss": 3,
			"uas": 424,
			"lofs": 0,
			"fecs": 0,
			"hec": 0,
			"ibe": 0,
			"crc_p": 0,
			"crcp_p": 0,
			"cv_p": 0,
			"cvp_p": 0,
			"rx_corrupted": 27740,
			"rx_uncorrected_protected": 27010,
			"rx_retransmitted": 0,
			"rx_corrected": 730,
			"tx_retransmitted": 16222
		},
		"far": {
			"es": 242,
			"ses": 71,
			"loss": 0,
			"uas": 424,
			"lofs": 0,
			"fecs": 22687,
			"hec": 0,
			"ibe": 0,
			"crc_p": 0,
			"crcp_p": 0,
			"cv_p": 0,
			"cvp_p": 0,
			"rx_corrupted": 1383552,
			"rx_uncorrected_protected": 1220215,
			"rx_retransmitted": 0,
			"rx_corrected": 163337,
			"tx_retransmitted": 1574051
		}
	}
}

Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Martin Schiller <ms@dev.tdt.de>
2021-02-08 21:43:00 +01:00

72 lines
2.1 KiB
Makefile

# Copyright (C) 2010 OpenWrt.org
# Copyright (C) 2015-2016 Lantiq Beteiligungs GmbH & Co KG.
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=ltq-vdsl-app
PKG_VERSION:=4.17.18.6
PKG_RELEASE:=5
PKG_BASE_NAME:=dsl_cpe_control
PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=@OPENWRT
PKG_HASH:=da8bb929526a61aea0e153ef524331fcd472a1ebbc6d88ca017735a4f82ece02
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BASE_NAME)-$(PKG_VERSION)
PKG_LICENSE:=BSD-2-Clause
PKG_BUILD_DEPENDS:=ltq-vdsl
PKG_FLAGS:=nonshared
PKG_FIXUP:=autoreconf
include $(INCLUDE_DIR)/package.mk
define Package/ltq-vdsl-app
SECTION:=net
CATEGORY:=Network
TITLE:=Lantiq VDSL userland tool
URL:=http://www.lantiq.com/
DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
endef
define Package/ltq-vdsl-app/description
Userland tool needed to control Lantiq VDSL CPE
endef
CONFIGURE_ARGS += \
--enable-vrx \
--enable-vrx-device=vr9 \
--enable-driver-include="-I$(STAGING_DIR)/usr/include/drv_vdsl_cpe_api" \
--enable-device-driver-include="-I$(STAGING_DIR)/usr/include/vdsl/" \
--enable-ifxos \
--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
--enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \
--enable-add-appl-cflags="-DMAX_CLI_PIPES=1" \
--enable-debug \
--disable-dti \
--with-channels-per-line="1" \
#CONFIGURE_ARGS += --enable-model=full
#CONFIGURE_ARGS += --enable-model=lite
#CONFIGURE_ARGS += --enable-model=footprint
CONFIGURE_ARGS += \
--enable-model=typical \
--enable-dsl-pm-showtime \
--disable-dsl-ceoc
#CONFIGURE_ARGS += --enable-model=debug
define Package/ltq-vdsl-app/install
$(INSTALL_DIR) $(1)/etc/init.d $(1)/sbin $(1)/etc/hotplug.d/dsl
$(INSTALL_BIN) ./files/dsl_control $(1)/etc/init.d/
$(INSTALL_BIN) ./files/10_atm.sh $(1)/etc/hotplug.d/dsl
$(INSTALL_BIN) ./files/10_ptm.sh $(1)/etc/hotplug.d/dsl
$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control
$(INSTALL_BIN) ./files/dsl_cpe_pipe.sh $(1)/sbin/
endef
$(eval $(call BuildPackage,ltq-vdsl-app))