Jonas Gorski e9390dcf23 ipq806x: ap148/r7500: fix eth0 for non gige speeds ...

Eth0 is attached to mac0 of the switch with a fixed link and and not to
phy4 in single phy mode, so configuring it to anything but 1000FD will
break the connection, which will happen if a only 100 Mbit capapble device
is plugged into the wan port.

Fix this by not taking the state from phy4 and just configuring a fixed link
for eth0.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47695

2015-12-02 22:16:23 +00:00

..

020-add-ap148-bootargs.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

021-add-ap148-partitions.patch

ipq806x: switch AP148 to using SMEM based MTD parser

2015-08-17 06:18:15 +00:00

022-add-db149-dts.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

024-ap148-add-memory-node.patch

ipq806x: add support for non-dt enabled ap148 bootloader

2015-08-04 23:09:43 +00:00

030-hwspinlock-core-add-device-tree-support.patch

ipq806x: add hwspinlock support

2015-08-17 06:17:47 +00:00

031-hwspinlock-qcom-Add-support-for-Qualcomm-HW-Mutex-bl.patch

ipq806x: add hwspinlock support

2015-08-17 06:17:47 +00:00

032-hwspinlock-qcom-Correct-msb-in-regmap_field.patch

ipq806x: add hwspinlock support

2015-08-17 06:17:47 +00:00

033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch

ipq806x: add hwspinlock support

2015-08-17 06:17:47 +00:00

034-soc-qcom-Add-device-tree-binding-for-SMEM.patch

ipq806x: add SMEM support

2015-08-17 06:17:58 +00:00

035-soc-qcom-Add-Shared-Memory-Manager-driver.patch

ipq806x: add SMEM support

2015-08-17 06:17:58 +00:00

036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch

ipq806x: add SMEM support

2015-08-17 06:17:58 +00:00

037-mtd-add-SMEM-parser-for-QCOM-platforms.patch

kernel: update 4.1 to 4.1.10

2015-10-04 11:34:39 +00:00

110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

114-pcie-add-ctlr-init.patch

ipq806x: fix PCIe reset gpio handling - the core already handles the active-low flag

2015-11-21 10:55:29 +00:00

115-add-pcie-aux-clk-dts.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

126-add-rpm-to-ipq8064-dts.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

133-ARM-Add-Krait-L2-register-accessor-functions.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

134-clk-mux-Split-out-register-accessors-for-reuse.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch

kernel: update 4.1 to 4.1.4

2015-08-05 13:55:14 +00:00

136-clk-Add-safe-switch-hook.patch

kernel: update 4.1 to 4.1.4

2015-08-05 13:55:14 +00:00

137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

138-clk-qcom-Add-HFPLL-driver.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

140-clk-qcom-Add-support-for-Krait-clocks.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

142-clk-qcom-Add-Krait-clock-controller-driver.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch

ipq806x: fix uninitialized variable usage in cpufreq-krait

2015-09-10 10:09:42 +00:00

155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch

ipq806x: Add ADM support

2015-08-07 08:36:16 +00:00

156-dmaengine-Add-ADM-driver.patch

ipq806x: Add ADM support

2015-08-07 08:36:16 +00:00

157-ARM-DT-ipq8064-Add-ADM-device-node.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch

ipq806x: add NAND flash controller support

2015-08-07 08:36:31 +00:00

162-mtd-nand-Qualcomm-NAND-controller-driver.patch

ipq806x: add NAND flash controller support

2015-08-07 08:36:31 +00:00

163-dt-bindings-qcom_nandc-Add-DT-bindings.patch

ipq806x: add NAND flash controller support

2015-08-07 08:36:31 +00:00

164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

300-arch-arm-force-ZRELADDR-on-arch-qcom.patch

kernel: update kernel 4.1 to version 4.1.11

2015-10-25 17:32:01 +00:00

301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch

ipq806x: ap148/r7500: fix eth0 for non gige speeds

2015-12-02 22:16:23 +00:00

302-mtd-qcom-smem-rename-rootfs-ubi.patch

ipq806x: rename "rootfs" to "ubi" on nand

2015-09-04 14:44:44 +00:00

700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch

ipq806x: update bleeding-edge kernel from 4.0 to 4.1

2015-08-04 23:09:38 +00:00

701-stmmac_update_to_4.3.patch

ipq806x: update stmmac to the version from linux 4.3

2015-11-22 19:06:51 +00:00

707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch

ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file

2015-11-21 10:54:58 +00:00

708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch

ipq806x: ap148/r7500: fix eth0 for non gige speeds

2015-12-02 22:16:23 +00:00

709-stmac-platform-add-support-for-retreiving-mac-from-m.patch

ipq806x: update stmmac to the version from linux 4.3

2015-11-22 19:06:51 +00:00

710-stmmac-fix-ipq806x-DMA-configuration.patch

ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues

2015-11-22 21:59:22 +00:00