openwrt/target/linux/ramips/dts/HC5861B.dts
Mathias Kresin 8f4dfadd5a ramips: add support for indicating the boot state using multiple leds
Use diag.sh version used for other targets supporting different leds
for the different boot states.

The existing led sequences should be the same as before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-07 11:34:18 +02:00

145 lines
2.2 KiB
Plaintext

/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "hiwifi,hc5861b", "mediatek,mt7628an-soc";
model = "HiWiFi HC5861B";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "hc5861b:green:system";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "hc5861b:green:wlan2g";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "refclk", "wdt", "wled_an";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "hw_panic";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf70000>;
};
partition@fc0000 {
label = "oem";
reg = <0xfc0000 0x20000>;
read-only;
};
bdinfo: partition@fe0000 {
label = "bdinfo";
reg = <0xfe0000 0x10000>;
read-only;
};
partition@ff0000 {
label = "backup";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&wmac {
status = "okay";
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
mtd-mac-address = <&factory 0x2e>;
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
led-active-low;
};
};
};