mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
532c3f3218
This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
63 lines
1.7 KiB
Diff
63 lines
1.7 KiB
Diff
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
|
|
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
|
|
@@ -2014,6 +2014,43 @@ static struct board_info __initdata boar
|
|
.num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
|
|
};
|
|
|
|
+static struct sprom_fixup __initdata EVG2000_fixups[] = {
|
|
+ { .offset = 219, .value = 0xec08 },
|
|
+};
|
|
+
|
|
+static struct board_info __initdata board_EVG2000 = {
|
|
+ .name = "96369PVG",
|
|
+ .expected_cpu_id = 0x6368,
|
|
+
|
|
+ .has_uart0 = 1,
|
|
+ .has_pci = 1,
|
|
+ .has_ohci0 = 1,
|
|
+ .has_ehci0 = 1,
|
|
+ .num_usbh_ports = 2,
|
|
+
|
|
+ .has_enetsw = 1,
|
|
+ .enetsw = {
|
|
+ .used_ports = {
|
|
+ [5] = {
|
|
+ .used = 1,
|
|
+ .phy_id = 0xff,
|
|
+ .bypass_link = 1,
|
|
+ .force_speed = 1000,
|
|
+ .force_duplex_full = 1,
|
|
+ .name = "RGMII",
|
|
+ },
|
|
+ },
|
|
+ },
|
|
+ .use_fallback_sprom = 1,
|
|
+ .fallback_sprom = {
|
|
+ .type = SPROM_BCM4322,
|
|
+ .pci_bus = 0,
|
|
+ .pci_dev = 1,
|
|
+ .board_fixups = EVG2000_fixups,
|
|
+ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups),
|
|
+ },
|
|
+};
|
|
+
|
|
static struct board_info __initdata board_HG655b = {
|
|
.name = "HW65x",
|
|
.expected_cpu_id = 0x6368,
|
|
@@ -2614,6 +2651,7 @@ static const struct board_info __initcon
|
|
&board_96368mvwg,
|
|
&board_96368mvngr,
|
|
&board_DGND3700v1_3800B,
|
|
+ &board_EVG2000,
|
|
&board_HG622,
|
|
&board_HG655b,
|
|
&board_P870HW51A_V2,
|
|
@@ -2726,6 +2764,7 @@ static struct of_device_id const bcm963x
|
|
{ .compatible = "huawei,hg622", .data = &board_HG622, },
|
|
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
|
|
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
|
|
+ { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
|
|
{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
|
|
#endif
|
|
#ifdef CONFIG_BCM63XX_CPU_63268
|