Chen Minqiang 531e42383a ath79: add support for GL.iNet GL-USB150 ... Add support for the ar71xx supported GL.iNet GL-USB150 to ath79. GL.iNet GL-USB150 is an USB dongle WiFi router, based on Atheros AR9331. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - Realtek RTL8152B USB to Ethernet bridge (connected with AR9331 PHY4) - 1T1R 2.4 GHz - 2x LED, 1x button - UART header on PCB Flash instruction: Vendor software is based on openwrt so you can flash the sysupgrade image via the vendor GUI or using command line sysupgrade utility. Make sure to not save configuration over reflash as uci settings differ between versions. Signed-off-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:07:23 +00:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add WiFi migration for AR913x	2021-09-01 08:07:02 +00:00
dts	ath79: add support for GL.iNet GL-USB150	2021-09-01 08:07:23 +00:00
files	ath79: add QCA956x SERDES init workaround	2021-09-01 08:07:13 +00:00
generic	ath79: add support for GL.iNet GL-USB150	2021-09-01 08:07:23 +00:00
image	ath79: add support for GL.iNet GL-USB150	2021-09-01 08:07:23 +00:00
mikrotik	kernel: move some disabled symbols to generic	2021-09-01 08:07:23 +00:00
nand	kernel: move some disabled symbols to generic	2021-09-01 08:07:23 +00:00
patches-5.4	kernel: bump 5.4 to 5.4.85	2021-09-01 08:07:23 +00:00
tiny	ath79: move the squashfs feature to the parent target	2021-09-01 08:07:13 +00:00
config-5.4	ath79: enable elf mtd splitter	2021-09-01 08:06:58 +00:00
Makefile	ath79: move the squashfs feature to the parent target	2021-09-01 08:07:13 +00:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00