mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
3cfa465387
Use generic earlycon on Linux Kernel instead of initialization in platform setup. And also, drop bootargs with console= parameter from I-O DATA BSH-G24MB. It uses 115200bps as baud-rate, the same as default in rtl838x.dtsi. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
184 lines
3.3 KiB
Plaintext
184 lines
3.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "realtek,rtl838x-soc";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
frequency = <800000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "mips,mips34Kc";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x8000000>;
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
cpuintc: cpuintc {
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
lx_clk: lx_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <175000000>;
|
|
};
|
|
|
|
soc: soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x18000000 0x10000>;
|
|
|
|
intc: interrupt-controller@3000 {
|
|
compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
|
|
reg = <0x3000 0x18>, <0x3018 0x18>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
|
|
};
|
|
|
|
spi0: spi@1200 {
|
|
compatible = "realtek,rtl8380-spi";
|
|
reg = <0x1200 0x100>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
timer0: timer@3200 {
|
|
compatible = "realtek,rtl930x-timer", "realtek,otto-timer";
|
|
reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
|
|
<0x3230 0x10>, <0x3240 0x10>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <7 4>, <8 4>, <9 4>, <10 4>, <11 4>;
|
|
clocks = <&lx_clk>;
|
|
};
|
|
|
|
uart0: uart@2000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x2000 0x100>;
|
|
|
|
clocks = <&lx_clk>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <30 1>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
};
|
|
|
|
uart1: uart@2100 {
|
|
compatible = "ns16550a";
|
|
reg = <0x2100 0x100>;
|
|
|
|
clocks = <&lx_clk>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <31 0>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog0: watchdog@3260 {
|
|
compatible = "realtek,rtl9300-wdt";
|
|
reg = <0x3260 0xc>;
|
|
|
|
realtek,reset-mode = "soc";
|
|
|
|
clocks = <&lx_clk>;
|
|
timeout-sec = <30>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupt-names = "phase1", "phase2";
|
|
interrupts = <5 4>, <6 4>;
|
|
};
|
|
|
|
gpio0: gpio-controller@3300 {
|
|
compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
|
|
reg = <0x3300 0x1c>, <0x3338 0x8>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
ngpios = <24>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <13 1>;
|
|
};
|
|
|
|
};
|
|
|
|
pinmux_led: pinmux@1b00cc00 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x1b00cc00 0x4>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
/* enable GPIO 0 */
|
|
pinmux_disable_sys_led: disable_sys_led {
|
|
pinctrl-single,bits = <0x0 0x0 0x1000>;
|
|
};
|
|
};
|
|
|
|
ethernet0: ethernet@1b00a300 {
|
|
compatible = "realtek,rtl838x-eth";
|
|
reg = <0x1b00a300 0x100>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <24 3>;
|
|
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
switch0: switch@1b000000 {
|
|
compatible = "realtek,rtl83xx-switch";
|
|
status = "okay";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|