openwrt/target/linux/brcm63xx/patches-3.14/565-board_hw520.patch
Jonas Gorski 52b0935efe brcm63xx: use dtb board detection for HW556
This requires individual images for each board version for now.
Linux partition was shrunk to ensure writing thewrong image won't
erase wifi calibration data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42126
2014-08-11 11:37:14 +00:00

68 lines
1.3 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -3553,6 +3553,56 @@ static struct board_info __initdata boar
.num_spis = ARRAY_SIZE(ct6373_spi_devices),
};
+static struct board_info __initdata board_HW520 = {
+ .name = "HW6358GW_B",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "HW520:green:net",
+ .gpio = 32,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 37,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
static struct board_info __initdata board_HW553 = {
.name = "HW553",
.expected_cpu_id = 0x6358,
@@ -5372,6 +5422,7 @@ static const struct board_info __initcon
&board_nb4_fxc_r1,
&board_nb4_fxc_r2,
&board_ct6373_1,
+ &board_HW520,
&board_HW553,
&board_HW556,
&board_HW556_A,