mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
f17be5617a
This updates the iProc PCIe driver to the version currently submitted for kernel 4.5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47688
63 lines
2.3 KiB
Diff
63 lines
2.3 KiB
Diff
From 199ff14100095d52cd1b232cc0f3b12f348b5b07 Mon Sep 17 00:00:00 2001
|
|
From: Ray Jui <rjui@broadcom.com>
|
|
Date: Tue, 15 Sep 2015 17:39:18 -0700
|
|
Subject: [PATCH 143/147] PCI: iproc: Fix PCIe reset logic
|
|
|
|
The current reset logic does not always properly reset the device. For
|
|
example, in the case when the perst_b signal is already de-asserted in the
|
|
bootloader, the current reset logic fails to trigger a proper assert ->
|
|
de-assert reset sequence.
|
|
|
|
Fix the issue by always triggering the proper reset sequence.
|
|
|
|
Also explicitly select the desired reset source, i.e., perst_b, and reduce
|
|
the wait time after the device comes out of reset from 250 ms to 100 ms,
|
|
based on recommendation from the ASIC team.
|
|
|
|
Tested-by: Vladimir Dreizin <vdreizin@broadcom.com>
|
|
Tested-by: Darren Edamura <dedamura@broadcom.com>
|
|
Signed-off-by: Ray Jui <rjui@broadcom.com>
|
|
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Reviewed-by: Vladimir Dreizin <vdreizin@broadcom.com>
|
|
Reviewed-by: Trac Hoang <trhoang@broadcom.com>
|
|
Reviewed-by: Scott Branden <sbranden@broadcom.com>
|
|
---
|
|
drivers/pci/host/pcie-iproc.c | 15 ++++++++++-----
|
|
1 file changed, 10 insertions(+), 5 deletions(-)
|
|
|
|
--- a/drivers/pci/host/pcie-iproc.c
|
|
+++ b/drivers/pci/host/pcie-iproc.c
|
|
@@ -31,6 +31,8 @@
|
|
#include "pcie-iproc.h"
|
|
|
|
#define CLK_CONTROL_OFFSET 0x000
|
|
+#define EP_PERST_SOURCE_SELECT_SHIFT 2
|
|
+#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT)
|
|
#define EP_MODE_SURVIVE_PERST_SHIFT 1
|
|
#define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
|
|
#define RC_PCIE_RST_OUTPUT_SHIFT 0
|
|
@@ -119,15 +121,18 @@ static void iproc_pcie_reset(struct ipro
|
|
u32 val;
|
|
|
|
/*
|
|
- * Configure the PCIe controller as root complex and send a downstream
|
|
- * reset
|
|
+ * Select perst_b signal as reset source. Put the device into reset,
|
|
+ * and then bring it out of reset
|
|
*/
|
|
- val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT;
|
|
+ val = readl(pcie->base + CLK_CONTROL_OFFSET);
|
|
+ val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
|
|
+ ~RC_PCIE_RST_OUTPUT;
|
|
writel(val, pcie->base + CLK_CONTROL_OFFSET);
|
|
udelay(250);
|
|
- val &= ~EP_MODE_SURVIVE_PERST;
|
|
+
|
|
+ val |= RC_PCIE_RST_OUTPUT;
|
|
writel(val, pcie->base + CLK_CONTROL_OFFSET);
|
|
- msleep(250);
|
|
+ msleep(100);
|
|
}
|
|
|
|
static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
|