Edward Matijevic 6da3194127 bcm47xx: add support for NETGEAR R6200 V1 ... This patch adds supports for the NETGEAR R6200 V1 This device is mainlined in Linux as of 5.4 Specification: - SOC: Broadcom BCM4718A1 (480 MHz) - Flash: 16MB (Macronix MX25L128) - RAM: 128MB DDR2 - SWITCH: BCM53125 - Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order) - WLAN 2.4G: In SOC - WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360) - USB: 1x USB 2.0 port (Type A) - Buttons: Reset, WLAN, WPS - LED: Amber for Power, others need a workaround - UART: 1x UART on PCB LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7) Firmware Install Instructions ============================= Using the device specific .chk, use that file to perform a normal device upgrade in the OEM admin page. Signed-off-by: Edward Matijevic <motolav@gmail.com>		2020-06-24 00:17:49 +02:00
..
base-files	bcm47xx: add support for NETGEAR R6200 V1	2020-06-24 00:17:49 +02:00
generic
image	bcm47xx: add support for NETGEAR R6200 V1	2020-06-24 00:17:49 +02:00
legacy
mips74k
patches-4.19	bcm47xx: add support for NETGEAR R6200 V1	2020-06-24 00:17:49 +02:00
patches-5.4	bcm47xx: fix brcm-wl module loading	2020-06-03 16:49:28 +02:00
config-4.19
config-5.4	bcm47xx: add support for kernel 5.4	2020-03-10 15:50:55 +01:00
Makefile	treewide: remove maintainer variable from targets	2020-03-16 22:21:45 +01:00
modules.mk