Adrian Schmutzler 522f66727e ath79: add support for Buffalo WZR-600DHP ... The hardware of this device seems to be identical to WZR-HP-AG300H. It was already implemented as a clone in ar71xx. Specification: - 680 MHz CPU (Qualcomm Atheros AR7161) - 128 MiB RAM - 32 MiB Flash - WiFi 5 GHz a/n - WiFi 2.4 GHz b/g/n - 5x 1000Base-T Ethernet - 1x USB 2.0 Installation of OpenWRT from vendor firmware: - Connect to the Web-interface at http://192.168.11.1 - Go to “Administration” → “Firmware Upgrade” - Upload the OpenWrt factory image Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:06:59 +00:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add mikrotik subtarget	2020-03-17 11:50:47 +01:00
dts	ath79: add support for Buffalo WZR-600DHP	2021-09-01 08:06:59 +00:00
files	kernel: Update kernel 4.19 to version 4.19.131	2020-07-04 21:12:42 +02:00
generic	ath79: add support for Buffalo WZR-600DHP	2021-09-01 08:06:59 +00:00
image	ath79: add support for Buffalo WZR-600DHP	2021-09-01 08:06:59 +00:00
mikrotik	treewide: use wpad-basic-wolfssl as default	2021-09-01 08:06:52 +00:00
nand	treewide: use wpad-basic-wolfssl as default	2021-09-01 08:06:52 +00:00
patches-4.19	kernel: Update kernel 4.19 to version 4.19.138	2021-09-01 08:06:49 +00:00
patches-5.4	kernel: bump 5.4 to 5.4.58	2021-09-01 08:06:51 +00:00
tiny	treewide: use wpad-basic-wolfssl as default	2021-09-01 08:06:52 +00:00
config-4.19	ath79: enable elf mtd splitter	2021-09-01 08:06:58 +00:00
config-5.4	ath79: enable elf mtd splitter	2021-09-01 08:06:58 +00:00
Makefile	ath79: switch to kernel 5.4	2020-07-07 10:33:17 +02:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00