openwrt/target/linux/generic/backport-5.15/705-06-v5.19-net-dsa-mt7530-switch-to-use-phylink_get_linkmodes.patch
John Audia 4536c76b55 kernel: bump 5.15 to 5.15.94
Patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-02-18 15:06:04 +01:00

132 lines
4.5 KiB
Diff

From 1c2211cb15dd3957fb26c0e1615eceb5db851ad6 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Mon, 11 Apr 2022 10:46:22 +0100
Subject: [PATCH 06/13] net: dsa: mt7530: switch to use phylink_get_linkmodes()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Switch mt7530 to use phylink_get_linkmodes() to generate the ethtool
linkmodes that can be supported. We are unable to use the generic
helper for this as pause modes are dependent on the interface as
the Autoneg bit depends on the interface mode.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
drivers/net/dsa/mt7530.c | 57 ++++------------------------------------
1 file changed, 5 insertions(+), 52 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2534,19 +2534,6 @@ static int mt7531_rgmii_setup(struct mt7
return 0;
}
-static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
- phy_interface_t interface,
- unsigned long *supported)
-{
- /* Port5 supports ethier RGMII or SGMII.
- * Port6 supports SGMII only.
- */
- if (port == 6 && interface == PHY_INTERFACE_MODE_2500BASEX) {
- phylink_set(supported, 2500baseX_Full);
- phylink_set(supported, 2500baseT_Full);
- }
-}
-
static void
mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port,
unsigned int mode, phy_interface_t interface,
@@ -2913,51 +2900,21 @@ static void mt753x_phylink_get_caps(stru
}
static void
-mt7530_mac_port_validate(struct dsa_switch *ds, int port,
- phy_interface_t interface,
- unsigned long *supported)
-{
-}
-
-static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
- phy_interface_t interface,
- unsigned long *supported)
-{
- struct mt7530_priv *priv = ds->priv;
-
- mt7531_sgmii_validate(priv, port, interface, supported);
-}
-
-static void
mt753x_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- struct mt7530_priv *priv = ds->priv;
+ u32 caps;
+
+ caps = dsa_to_port(ds, port)->pl_config.mac_capabilities;
phylink_set_port_modes(mask);
+ phylink_get_linkmodes(mask, state->interface, caps);
if (state->interface != PHY_INTERFACE_MODE_TRGMII &&
- !phy_interface_mode_is_8023z(state->interface)) {
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Half);
- phylink_set(mask, 100baseT_Full);
+ !phy_interface_mode_is_8023z(state->interface))
phylink_set(mask, Autoneg);
- }
-
- /* This switch only supports 1G full-duplex. */
- if (state->interface != PHY_INTERFACE_MODE_MII &&
- state->interface != PHY_INTERFACE_MODE_2500BASEX) {
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseX_Full);
- }
-
- priv->info->mac_port_validate(ds, port, state->interface, mask);
-
- phylink_set(mask, Pause);
- phylink_set(mask, Asym_Pause);
linkmode_and(supported, supported, mask);
linkmode_and(state->advertising, state->advertising, mask);
@@ -3158,7 +3115,6 @@ static const struct mt753x_info mt753x_t
.phy_write = mt7530_phy_write,
.pad_setup = mt7530_pad_clk_setup,
.mac_port_get_caps = mt7530_mac_port_get_caps,
- .mac_port_validate = mt7530_mac_port_validate,
.mac_port_get_state = mt7530_phylink_mac_link_state,
.mac_port_config = mt7530_mac_config,
},
@@ -3169,7 +3125,6 @@ static const struct mt753x_info mt753x_t
.phy_write = mt7530_phy_write,
.pad_setup = mt7530_pad_clk_setup,
.mac_port_get_caps = mt7530_mac_port_get_caps,
- .mac_port_validate = mt7530_mac_port_validate,
.mac_port_get_state = mt7530_phylink_mac_link_state,
.mac_port_config = mt7530_mac_config,
},
@@ -3181,7 +3136,6 @@ static const struct mt753x_info mt753x_t
.pad_setup = mt7531_pad_setup,
.cpu_port_config = mt7531_cpu_port_config,
.mac_port_get_caps = mt7531_mac_port_get_caps,
- .mac_port_validate = mt7531_mac_port_validate,
.mac_port_get_state = mt7531_phylink_mac_link_state,
.mac_port_config = mt7531_mac_config,
.mac_pcs_an_restart = mt7531_sgmii_restart_an,
@@ -3243,7 +3197,6 @@ mt7530_probe(struct mdio_device *mdiodev
if (!priv->info->sw_setup || !priv->info->pad_setup ||
!priv->info->phy_read || !priv->info->phy_write ||
!priv->info->mac_port_get_caps ||
- !priv->info->mac_port_validate ||
!priv->info->mac_port_get_state || !priv->info->mac_port_config)
return -EINVAL;