mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
51ef823f95
* allow MAC address from U-Boot env to be inhertied * allow eMMC installation to succeed also without recovery present on the SD Card. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
104 lines
1.9 KiB
Diff
104 lines
1.9 KiB
Diff
--- a/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
|
|
+++ b/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
|
|
@@ -20,6 +20,7 @@
|
|
|
|
aliases {
|
|
spi0 = &snfi;
|
|
+ ethernet0 = ð
|
|
};
|
|
|
|
memory@40000000 {
|
|
@@ -27,6 +29,42 @@
|
|
reg = <0x40000000 0x40000000>;
|
|
};
|
|
|
|
+ gpio-keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ reset {
|
|
+ label = "reset";
|
|
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ wps {
|
|
+ label = "wps";
|
|
+ gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+/*
|
|
+ * red {
|
|
+ * label = "bpi-r64:pio:red";
|
|
+ * gpios = <&gpio 88 GPIO_ACTIVE_HIGH>;
|
|
+ * default-state = "off";
|
|
+ * };
|
|
+ */
|
|
+ green {
|
|
+ label = "bpi-r64:pio:green";
|
|
+ gpios = <&gpio 89 GPIO_ACTIVE_HIGH>;
|
|
+ default-state = "off";
|
|
+ };
|
|
+
|
|
+ blue {
|
|
+ label = "bpi-r64:pio:blue";
|
|
+ gpios = <&gpio 85 GPIO_ACTIVE_LOW>;
|
|
+ default-state = "off";
|
|
+ };
|
|
+ };
|
|
+
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
@@ -139,11 +177,12 @@
|
|
|
|
};
|
|
|
|
- mmc1_pins_default: mmc1default {
|
|
+ sd0_pins_default: sd0-pins-default {
|
|
mux {
|
|
function = "sd";
|
|
- groups = "sd_0";
|
|
+ groups = "sd_0";
|
|
};
|
|
+
|
|
/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
|
|
* "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
|
|
* DAT2, DAT3, CMD, CLK for SD respectively.
|
|
@@ -164,7 +203,6 @@
|
|
pins = "TXD3";
|
|
bias-pull-up;
|
|
};
|
|
-
|
|
};
|
|
};
|
|
|
|
@@ -199,7 +237,7 @@
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
max-frequency = <50000000>;
|
|
- cap-sd-highspeed;
|
|
+ cap-mmc-highspeed;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_3p3v>;
|
|
non-removable;
|
|
@@ -207,14 +245,15 @@
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
- pinctrl-0 = <&mmc1_pins_default>;
|
|
+ pinctrl-0 = <&sd0_pins_default>;
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
- max-frequency = <50000000>;
|
|
+ max-frequency = <20000000>;
|
|
cap-sd-highspeed;
|
|
r_smpl = <1>;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_3p3v>;
|
|
+ cd-gpios = <&gpio 81 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&watchdog {
|