openwrt/target/linux/ipq806x/patches-4.9/0044-clk-Add-safe-switch-hook.patch
Pavel Kubelun 7903a9219c ipq806x: update clk and cpufreq drivers
A newer clk and cpufreq drivers for ipq806x platform had been sent upstream.

A change that i have noticed is that now it's possible to set min, cur and max frequencies from sysfs (previously it was bugged and caused nothing).

Following patches are removed:
 - 0036-clk-Avoid-sending-high-rates-to-downstream-clocks-du.patch - seems it was dropped from the patchset by current committer.
 - 0044-clk-qcom-krait-Remove-CLK_IS_ROOT.patch - already applied to the driver itself in the corresponding patch.
 - 0057-clk-qcom-Add-regmap-mux-div-clocks-support.patch - seem to be irrelevant to ipq806x.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2018-01-17 11:02:05 +01:00

161 lines
4.6 KiB
Diff

From patchwork Fri Dec 8 09:42:28 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v4,10/12] clk: qcom: Add safe switch hook for krait mux clocks
From: Sricharan R <sricharan@codeaurora.org>
X-Patchwork-Id: 10102057
Message-Id: <1512726150-7204-11-git-send-email-sricharan@codeaurora.org>
To: mturquette@baylibre.com, sboyd@codeaurora.org,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
Cc: sricharan@codeaurora.org
Date: Fri, 8 Dec 2017 15:12:28 +0530
When the Hfplls are reprogrammed during the rate change,
the primary muxes which are sourced from the same hfpll
for higher frequencies, needs to be switched to the 'safe
secondary mux' as the parent for that small window. This
is done by registering a clk notifier for the muxes and
switching to the safe parent in the PRE_RATE_CHANGE notifier
and back to the original parent in the POST_RATE_CHANGE notifier.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
drivers/clk/qcom/clk-krait.c | 2 ++
drivers/clk/qcom/clk-krait.h | 3 +++
drivers/clk/qcom/krait-cc.c | 56 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 61 insertions(+)
--- a/drivers/clk/qcom/clk-krait.c
+++ b/drivers/clk/qcom/clk-krait.c
@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c
if (__clk_is_enabled(hw->clk))
__krait_mux_set_sel(mux, sel);
+ mux->reparent = true;
+
return 0;
}
--- a/drivers/clk/qcom/clk-krait.h
+++ b/drivers/clk/qcom/clk-krait.h
@@ -23,6 +23,9 @@ struct krait_mux_clk {
u32 shift;
u32 en_mask;
bool lpl;
+ u8 safe_sel;
+ u8 old_index;
+ bool reparent;
struct clk_hw hw;
struct notifier_block clk_nb;
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = {
0,
};
+/*
+ * Notifier function for switching the muxes to safe parent
+ * while the hfpll is getting reprogrammed.
+ */
+static int krait_notifier_cb(struct notifier_block *nb,
+ unsigned long event,
+ void *data)
+{
+ int ret = 0;
+ struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk,
+ clk_nb);
+ /* Switch to safe parent */
+ if (event == PRE_RATE_CHANGE) {
+ mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw);
+ ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel);
+ mux->reparent = false;
+ /*
+ * By the time POST_RATE_CHANGE notifier is called,
+ * clk framework itself would have changed the parent for the new rate.
+ * Only otherwise, put back to the old parent.
+ */
+ } else if (event == POST_RATE_CHANGE) {
+ if (!mux->reparent)
+ ret = krait_mux_clk_ops.set_parent(&mux->hw,
+ mux->old_index);
+ }
+
+ return notifier_from_errno(ret);
+}
+
+static int krait_notifier_register(struct device *dev, struct clk *clk,
+ struct krait_mux_clk *mux)
+{
+ int ret = 0;
+
+ mux->clk_nb.notifier_call = krait_notifier_cb;
+ ret = clk_notifier_register(clk, &mux->clk_nb);
+ if (ret)
+ dev_err(dev, "failed to register clock notifier: %d\n", ret);
+
+ return ret;
+}
+
static int
krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
{
@@ -79,6 +122,7 @@ static int
krait_add_sec_mux(struct device *dev, int id, const char *s,
unsigned int offset, bool unique_aux)
{
+ int ret;
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
"acpu_aux",
@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in
mux->shift = 2;
mux->parent_map = sec_mux_map;
mux->hw.init = &init;
+ mux->safe_sel = 0;
init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
if (!init.name)
@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in
clk = devm_clk_register(dev, &mux->hw);
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto unique_aux;
+
+unique_aux:
if (unique_aux)
kfree(sec_mux_list[0]);
err_aux:
@@ -128,6 +178,7 @@ static struct clk *
krait_add_pri_mux(struct device *dev, int id, const char *s,
unsigned int offset)
{
+ int ret;
struct krait_mux_clk *mux;
const char *p_names[3];
struct clk_init_data init = {
@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in
mux->lpl = id >= 0;
mux->parent_map = pri_mux_map;
mux->hw.init = &init;
+ mux->safe_sel = 2;
init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
if (!init.name)
@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in
clk = devm_clk_register(dev, &mux->hw);
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto err_p3;
+err_p3:
kfree(p_names[2]);
err_p2:
kfree(p_names[1]);