openwrt/target/linux/ramips/dts/rt3050_trendnet_tew-638apb-v2.dts
Chuanhong Guo b756ea2a90 ramips: replace pinctrl property names
Upstream pinctrl driver in drivers/staging uses
groups/function/ralink,num-gpios instead of
ralink,group/ralink,function/ralink,nr-gpio
Replace these properties in dts as well as the pinctrl driver in
patches-4.14.
This commit is created using:
sed -i 's/ralink,group/groups/g'
sed -i 's/ralink,function/function/g'
sed -i 's/ralink,nr-gpio/ralink,num-gpios/g'

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-04-12 22:29:17 +08:00

106 lines
1.7 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
model = "TRENDnet TEW-638APB v2";
aliases {
led-boot = &led_wps_green;
led-failsafe = &led_wps_green;
led-running = &led_wps_green;
led-upgrade = &led_wps_green;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x400000>;
bank-width = <2>;
device-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
wps {
label = "tew-638apb-v2:orange:wps";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
led_wps_green: wps2 {
label = "tew-638apb-v2:green:wps";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
};
&state_default {
gpio {
groups = "uartf";
function = "gpio";
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&esw {
mediatek,portmap = <0x2f>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};