mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
304423a4ff
Add patches:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch
Remove upstreamed:
- 170-DPP-fix-memleak-of-intro.peer_key.patch
- 461-driver_nl80211-use-new-parameters-during-ibss-join.patch
- 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch
- 992-openssl-include-rsa.patch
Automatically refreshed:
- 011-mesh-use-deterministic-channel-on-channel-switch.patch
- 021-fix-sta-add-after-previous-connection.patch
- 022-hostapd-fix-use-of-uninitialized-stack-variables.patch
- 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 050-build_fix.patch
- 110-mbedtls-TLS-crypto-option-initial-port.patch
- 120-mbedtls-fips186_2_prf.patch
- 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
- 150-add-NULL-checks-encountered-during-tests-hwsim.patch
- 160-dpp_pkex-EC-point-mul-w-value-prime.patch
- 200-multicall.patch
- 300-noscan.patch
- 310-rescan_immediately.patch
- 330-nl80211_fix_set_freq.patch
- 341-mesh-ctrl-iface-channel-switch.patch
- 360-ctrl_iface_reload.patch
- 381-hostapd_cli_UNKNOWN-COMMAND.patch
- 390-wpa_ie_cap_workaround.patch
- 410-limit_debug_messages.patch
- 420-indicate-features.patch
- 430-hostapd_cli_ifdef.patch
- 450-scan_wait.patch
- 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch
- 463-add-mcast_rate-to-11s.patch
- 465-hostapd-config-support-random-BSS-color.patch
- 500-lto-jobserver-support.patch
- 590-rrm-wnm-statistics.patch
- 710-vlan_no_bridge.patch
- 720-iface_max_num_sta.patch
- 730-ft_iface.patch
- 750-qos_map_set_without_interworking.patch
- 751-qos_map_ignore_when_unsupported.patch
- 760-dynamic_own_ip.patch
- 761-shared_das_port.patch
- 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch
Manually refresh:
- 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
- 301-mesh-noscan.patch
- 340-reload_freq_change.patch
- 350-nl80211_del_beacon_bss.patch
- 370-ap_sta_support.patch
- 380-disable_ctrl_iface_mib.patch
- 464-fix-mesh-obss-check.patch
- 470-survey_data_fallback.patch
- 600-ubus_support.patch
- 700-wifi-reload.patch
- 711-wds_bridge_force.patch
- 740-snoop_iface.patch
Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx),
EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK]
Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic]
Signed-off-by: Nick Hainke <vincent@systemli.org>
26 lines
858 B
Diff
26 lines
858 B
Diff
From: Felix Fietkau <nbd@nbd.name>
|
|
Date: Thu, 8 Jul 2021 16:33:03 +0200
|
|
Subject: [PATCH] hostapd: fix use of uninitialized stack variables
|
|
|
|
When a CSA is performed on an 80 MHz channel, hostapd_change_config_freq
|
|
unconditionally calls hostapd_set_oper_centr_freq_seg0/1_idx with seg0/1
|
|
filled by ieee80211_freq_to_chan.
|
|
However, if ieee80211_freq_to_chan fails (because the freq is 0 or invalid),
|
|
seg0/1 remains uninitialized and filled with stack garbage, causing errors
|
|
such as "hostapd: 80 MHz: center segment 1 configured"
|
|
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
---
|
|
|
|
--- a/src/ap/hostapd.c
|
|
+++ b/src/ap/hostapd.c
|
|
@@ -3562,7 +3562,7 @@ static int hostapd_change_config_freq(st
|
|
struct hostapd_freq_params *old_params)
|
|
{
|
|
int channel;
|
|
- u8 seg0, seg1;
|
|
+ u8 seg0 = 0, seg1 = 0;
|
|
struct hostapd_hw_modes *mode;
|
|
|
|
if (!params->channel) {
|