openwrt/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
Adrian Schmutzler 50fdc0374b ath79: provide label MAC address
This patch adds the label MAC address for several devices in
ath79.

Some devices require setting the MAC address in 02_network:

For the following devices, the netif device can be linked in
device tree, but the MAC address cannot be read:
- alfa-network,ap121f
- avm,fritz300e
- ubnt-xm devices

For the following devices, label MAC address is tied to lan or
wan, so no node to link to exists in device tree:
- adtran,bsap1800-v2
- adtran,bsap1840
- dlink,dir-842-c1/-c2/-c3
- engenius,ecb1750
- iodata,etg3-r
- iodata,wn-ac1167dgr
- iodata,wn-ac1600dgr
- iodata,wn-ac1600dgr2
- iodata,wn-ag300dgr
- nec,wg800hp
- nec,wg1200cr
- trendnet,tew-823dru

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-19 23:43:27 +02:00

167 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
compatible = "tplink,archer-c5x", "qca,qca9560";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
label-mac-device = &eth1;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <10000000>;
};
};
leds: leds {
compatible = "gpio-leds";
power: power {
label = "tp-link:green:power";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan_green {
label = "tp-link:green:wan";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
wan_amber {
label = "tp-link:amber:wan";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
lan {
label = "tp-link:green:lan";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
wps {
label = "tp-link:green:wps";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps_button {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wifi_button {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
reset_button {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_shift_register_oe {
gpio-export,name = "tp-link:oe:sr";
gpio-export,output = <0>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
gpio_shift_register_reset {
gpio-export,name = "tp-link:reset:sr";
gpio-export,output = <1>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&pcie {
status = "okay";
};
&eth0 {
status = "okay";
phy-mode = "mii";
phy-handle = <&swphy0>;
mtd-mac-address = <&mac 0x8>;
mtd-mac-address-increment = <1>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&mac 0x8>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&mac 0x8>;
};