mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
62b7f5931c
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry-picked from commit f07e572f64)
60 lines
1.8 KiB
Diff
60 lines
1.8 KiB
Diff
From 1d78f72cb5a387922870e2a54228be25f84f95f6 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Tue, 16 Jun 2020 10:23:29 +0100
|
|
Subject: [PATCH] Revert "spi: spi-bcm2835: Disable forced software
|
|
CS"
|
|
|
|
This reverts commit 2697f0186db346176832b8eb79adaf5c874681e8.
|
|
|
|
See: https://github.com/raspberrypi/linux/pull/3687
|
|
---
|
|
drivers/spi/spi-bcm2835.c | 37 +++++++++++++++++++++++++++++++++++++
|
|
1 file changed, 37 insertions(+)
|
|
|
|
--- a/drivers/spi/spi-bcm2835.c
|
|
+++ b/drivers/spi/spi-bcm2835.c
|
|
@@ -1235,6 +1235,43 @@ static int bcm2835_spi_setup(struct spi_
|
|
return -EINVAL;
|
|
}
|
|
|
|
+ /*
|
|
+ * Translate native CS to GPIO
|
|
+ *
|
|
+ * FIXME: poking around in the gpiolib internals like this is
|
|
+ * not very good practice. Find a way to locate the real problem
|
|
+ * and fix it. Why is the GPIO descriptor in spi->cs_gpiod
|
|
+ * sometimes not assigned correctly? Erroneous device trees?
|
|
+ */
|
|
+
|
|
+ /* get the gpio chip for the base */
|
|
+ chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
|
|
+ if (!chip)
|
|
+ return 0;
|
|
+
|
|
+ /*
|
|
+ * Retrieve the corresponding GPIO line used for CS.
|
|
+ * The inversion semantics will be handled by the GPIO core
|
|
+ * code, so we pass GPIOS_OUT_LOW for "unasserted" and
|
|
+ * the correct flag for inversion semantics. The SPI_CS_HIGH
|
|
+ * on spi->mode cannot be checked for polarity in this case
|
|
+ * as the flag use_gpio_descriptors enforces SPI_CS_HIGH.
|
|
+ */
|
|
+ if (of_property_read_bool(spi->dev.of_node, "spi-cs-high"))
|
|
+ lflags = GPIO_ACTIVE_HIGH;
|
|
+ else
|
|
+ lflags = GPIO_ACTIVE_LOW;
|
|
+ spi->cs_gpiod = gpiochip_request_own_desc(chip, 8 - spi->chip_select,
|
|
+ DRV_NAME,
|
|
+ lflags,
|
|
+ GPIOD_OUT_LOW);
|
|
+ if (IS_ERR(spi->cs_gpiod))
|
|
+ return PTR_ERR(spi->cs_gpiod);
|
|
+
|
|
+ /* and set up the "mode" and level */
|
|
+ dev_info(&spi->dev, "setting up native-CS%i to use GPIO\n",
|
|
+ spi->chip_select);
|
|
+
|
|
return 0;
|
|
}
|
|
|