mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
8299d1f057
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted patches, wireless patches and defconfig patches. bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 4B v1.1 4G bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
206 lines
4.2 KiB
Diff
206 lines
4.2 KiB
Diff
From a38d7464ca20e1c0aaa3ed77e03e1ea6af4bc557 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Wed, 31 Mar 2021 10:22:30 +0100
|
|
Subject: [PATCH] ARM: dts: update bcm2711-rpi-cm4.dts and -400
|
|
|
|
Neither CM4 nor Pi 400 have appeared upstream yet, and as a result
|
|
they have missed out on improvements to the Pi 4B platform.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
|
|
ARM: dts: Bring bcm2711-rpi-400.dts up-to-date
|
|
|
|
Pi 400 support has not appeared upstream yet, and as a result it has
|
|
missed out on improvements to the other Pi 4 platforms.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/bcm2711-rpi-400.dts | 17 +++++++
|
|
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 73 +++++++++++++++++++++------
|
|
2 files changed, 74 insertions(+), 16 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
|
|
@@ -24,6 +24,7 @@
|
|
emmc2bus = &emmc2bus;
|
|
ethernet0 = &genet;
|
|
pcie0 = &pcie0;
|
|
+ blconfig = &blconfig;
|
|
};
|
|
|
|
leds {
|
|
@@ -215,6 +216,22 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&rmem {
|
|
+ /*
|
|
+ * RPi4's co-processor will copy the board's bootloader configuration
|
|
+ * into memory for the OS to consume. It'll also update this node with
|
|
+ * its placement information.
|
|
+ */
|
|
+ blconfig: nvram@0 {
|
|
+ compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ reg = <0x0 0x0 0x0>;
|
|
+ no-map;
|
|
+ status = "disabled";
|
|
+ };
|
|
+};
|
|
+
|
|
/* SDHCI is used to control the SDIO for wireless */
|
|
&sdhci {
|
|
#address-cells = <1>;
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
|
@@ -3,6 +3,8 @@
|
|
#include "bcm2711.dtsi"
|
|
#include "bcm2835-rpi.dtsi"
|
|
|
|
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
|
|
+
|
|
/ {
|
|
compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
|
|
model = "Raspberry Pi Compute Module 4";
|
|
@@ -22,6 +24,7 @@
|
|
emmc2bus = &emmc2bus;
|
|
ethernet0 = &genet;
|
|
pcie0 = &pcie0;
|
|
+ blconfig = &blconfig;
|
|
};
|
|
|
|
leds {
|
|
@@ -76,6 +79,11 @@
|
|
};
|
|
|
|
&firmware {
|
|
+ firmware_clocks: clocks {
|
|
+ compatible = "raspberrypi,firmware-clocks";
|
|
+ #clock-cells = <1>;
|
|
+ };
|
|
+
|
|
expgpio: gpio {
|
|
compatible = "raspberrypi,firmware-gpio";
|
|
gpio-controller;
|
|
@@ -102,6 +110,11 @@
|
|
output-low;
|
|
};
|
|
};
|
|
+
|
|
+ reset: reset {
|
|
+ compatible = "raspberrypi,firmware-reset";
|
|
+ #reset-cells = <1>;
|
|
+ };
|
|
};
|
|
|
|
&gpio {
|
|
@@ -209,20 +222,28 @@
|
|
status = "okay";
|
|
};
|
|
|
|
-&vc4 {
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&vec {
|
|
- status = "disabled";
|
|
-};
|
|
-
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
|
|
status = "okay";
|
|
};
|
|
|
|
+&rmem {
|
|
+ /*
|
|
+ * RPi4's co-processor will copy the board's bootloader configuration
|
|
+ * into memory for the OS to consume. It'll also update this node with
|
|
+ * its placement information.
|
|
+ */
|
|
+ blconfig: nvram@0 {
|
|
+ compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ reg = <0x0 0x0 0x0>;
|
|
+ no-map;
|
|
+ status = "disabled";
|
|
+ };
|
|
+};
|
|
+
|
|
/* SDHCI is used to control the SDIO for wireless */
|
|
&sdhci {
|
|
#address-cells = <1>;
|
|
@@ -262,6 +283,21 @@
|
|
};
|
|
};
|
|
|
|
+&pcie0 {
|
|
+ pci@1,0 {
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+ ranges;
|
|
+
|
|
+ reg = <0 0 0 0 0>;
|
|
+
|
|
+ usb@1,0 {
|
|
+ reg = <0x10000 0 0 0 0>;
|
|
+ resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
/* uart0 communicates with the BT module */
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
@@ -287,6 +323,14 @@
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
+&vc4 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vec {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
// =============================================
|
|
// Downstream rpi- changes
|
|
|
|
@@ -306,6 +350,7 @@
|
|
#include "bcm283x-rpi-csi0-2lane.dtsi"
|
|
#include "bcm283x-rpi-csi1-4lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
+#include "bcm283x-rpi-cam1-regulator.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
@@ -331,14 +376,6 @@
|
|
};
|
|
|
|
/delete-node/ wifi-pwrseq;
|
|
-
|
|
- cam0_reg: cam1_reg: cam1_reg {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "cam1-reg";
|
|
- gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
|
|
- enable-active-high;
|
|
- status = "disabled";
|
|
- };
|
|
};
|
|
|
|
&mmcnr {
|
|
@@ -589,6 +626,10 @@
|
|
brcm,disable-headphones = <1>;
|
|
};
|
|
|
|
+cam0_reg: &cam1_reg {
|
|
+ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
+
|
|
/ {
|
|
__overrides__ {
|
|
act_led_gpio = <&act_led>,"gpios:4";
|