mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
9703a2adcc
Refresh all patches on top of kernel 5.10.138. The following patches were applied upstream: bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more. bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch Fixes:89956c6532("kernel: bump 5.10 to 5.10.138") Fixes:4209c33ae2("kernel: bump 5.10 to 5.10.137") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
28 lines
1.0 KiB
Diff
28 lines
1.0 KiB
Diff
From 169f0a14f21a95194c5de355ce9a95d36aa97bef Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Tue, 19 May 2020 16:20:30 +0100
|
|
Subject: [PATCH] drm/vc4: Add FKMS as an acceptable node for dma
|
|
ranges.
|
|
|
|
Under FKMS, the firmware (via FKMS) also requires the VideoCore cache
|
|
aliases for image planes, as defined by the dma-ranges under /soc.
|
|
|
|
Add rpi-firmware-kms to the list of acceptable nodes to look for
|
|
to copy dma config from.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_drv.c | 1 +
|
|
1 file changed, 1 insertion(+)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_drv.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
|
|
@@ -249,6 +249,7 @@ static void vc4_match_add_drivers(struct
|
|
static const struct of_device_id vc4_dma_range_matches[] = {
|
|
{ .compatible = "brcm,bcm2711-hvs" },
|
|
{ .compatible = "brcm,bcm2835-hvs" },
|
|
+ { .compatible = "raspberrypi,rpi-firmware-kms" },
|
|
{ .compatible = "brcm,bcm2835-v3d" },
|
|
{ .compatible = "brcm,cygnus-v3d" },
|
|
{ .compatible = "brcm,vc4-v3d" },
|