mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
62b7f5931c
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry-picked from commit f07e572f64)
174 lines
5.0 KiB
Diff
174 lines
5.0 KiB
Diff
From 84477b71c184345517625f5c3eccf26a29eac4df Mon Sep 17 00:00:00 2001
|
|
From: Stefan Wahren <stefan.wahren@i2se.com>
|
|
Date: Mon, 13 Jan 2020 19:56:16 +0100
|
|
Subject: [PATCH] thermal: Add BCM2711 thermal driver
|
|
|
|
Commit 59b781352dc4cb9ae27a8ddae0cda979d29d8af7 upstream.
|
|
|
|
This adds the thermal sensor driver for the Broadcom BCM2711 SoC,
|
|
which is placed on the Raspberry Pi 4. The driver only provides
|
|
SoC temperature reading so far.
|
|
|
|
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
|
|
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
|
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Link: https://lore.kernel.org/r/1578941778-23321-3-git-send-email-stefan.wahren@i2se.com
|
|
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
---
|
|
drivers/thermal/broadcom/Kconfig | 7 ++
|
|
drivers/thermal/broadcom/Makefile | 1 +
|
|
drivers/thermal/broadcom/bcm2711_thermal.c | 123 +++++++++++++++++++++
|
|
3 files changed, 131 insertions(+)
|
|
create mode 100644 drivers/thermal/broadcom/bcm2711_thermal.c
|
|
|
|
--- a/drivers/thermal/broadcom/Kconfig
|
|
+++ b/drivers/thermal/broadcom/Kconfig
|
|
@@ -1,4 +1,11 @@
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
|
+config BCM2711_THERMAL
|
|
+ tristate "Broadcom AVS RO thermal sensor driver"
|
|
+ depends on ARCH_BCM2835 || COMPILE_TEST
|
|
+ depends on THERMAL_OF && MFD_SYSCON
|
|
+ help
|
|
+ Support for thermal sensors on Broadcom BCM2711 SoCs.
|
|
+
|
|
config BCM2835_THERMAL
|
|
tristate "Thermal sensors on bcm2835 SoC"
|
|
depends on ARCH_BCM2835 || COMPILE_TEST
|
|
--- a/drivers/thermal/broadcom/Makefile
|
|
+++ b/drivers/thermal/broadcom/Makefile
|
|
@@ -1,4 +1,5 @@
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
|
+obj-$(CONFIG_BCM2711_THERMAL) += bcm2711_thermal.o
|
|
obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
|
|
obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o
|
|
obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o
|
|
--- /dev/null
|
|
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
|
|
@@ -0,0 +1,123 @@
|
|
+// SPDX-License-Identifier: GPL-2.0+
|
|
+/*
|
|
+ * Broadcom AVS RO thermal sensor driver
|
|
+ *
|
|
+ * based on brcmstb_thermal
|
|
+ *
|
|
+ * Copyright (C) 2020 Stefan Wahren
|
|
+ */
|
|
+
|
|
+#include <linux/bitops.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/mfd/syscon.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/of_device.h>
|
|
+#include <linux/regmap.h>
|
|
+#include <linux/thermal.h>
|
|
+
|
|
+#include "../thermal_hwmon.h"
|
|
+
|
|
+#define AVS_RO_TEMP_STATUS 0x200
|
|
+#define AVS_RO_TEMP_STATUS_VALID_MSK (BIT(16) | BIT(10))
|
|
+#define AVS_RO_TEMP_STATUS_DATA_MSK GENMASK(9, 0)
|
|
+
|
|
+struct bcm2711_thermal_priv {
|
|
+ struct regmap *regmap;
|
|
+ struct thermal_zone_device *thermal;
|
|
+};
|
|
+
|
|
+static int bcm2711_get_temp(void *data, int *temp)
|
|
+{
|
|
+ struct bcm2711_thermal_priv *priv = data;
|
|
+ int slope = thermal_zone_get_slope(priv->thermal);
|
|
+ int offset = thermal_zone_get_offset(priv->thermal);
|
|
+ u32 val;
|
|
+ int ret;
|
|
+ long t;
|
|
+
|
|
+ ret = regmap_read(priv->regmap, AVS_RO_TEMP_STATUS, &val);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ if (!(val & AVS_RO_TEMP_STATUS_VALID_MSK))
|
|
+ return -EIO;
|
|
+
|
|
+ val &= AVS_RO_TEMP_STATUS_DATA_MSK;
|
|
+
|
|
+ /* Convert a HW code to a temperature reading (millidegree celsius) */
|
|
+ t = slope * val + offset;
|
|
+
|
|
+ *temp = t < 0 ? 0 : t;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct thermal_zone_of_device_ops bcm2711_thermal_of_ops = {
|
|
+ .get_temp = bcm2711_get_temp,
|
|
+};
|
|
+
|
|
+static const struct of_device_id bcm2711_thermal_id_table[] = {
|
|
+ { .compatible = "brcm,bcm2711-thermal" },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, bcm2711_thermal_id_table);
|
|
+
|
|
+static int bcm2711_thermal_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct thermal_zone_device *thermal;
|
|
+ struct bcm2711_thermal_priv *priv;
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct device_node *parent;
|
|
+ struct regmap *regmap;
|
|
+ int ret;
|
|
+
|
|
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
+ if (!priv)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ /* get regmap from syscon node */
|
|
+ parent = of_get_parent(dev->of_node); /* parent should be syscon node */
|
|
+ regmap = syscon_node_to_regmap(parent);
|
|
+ of_node_put(parent);
|
|
+ if (IS_ERR(regmap)) {
|
|
+ ret = PTR_ERR(regmap);
|
|
+ dev_err(dev, "failed to get regmap: %d\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+ priv->regmap = regmap;
|
|
+
|
|
+ thermal = devm_thermal_zone_of_sensor_register(dev, 0, priv,
|
|
+ &bcm2711_thermal_of_ops);
|
|
+ if (IS_ERR(thermal)) {
|
|
+ ret = PTR_ERR(thermal);
|
|
+ dev_err(dev, "could not register sensor: %d\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ priv->thermal = thermal;
|
|
+
|
|
+ thermal->tzp->no_hwmon = false;
|
|
+ ret = thermal_add_hwmon_sysfs(thermal);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver bcm2711_thermal_driver = {
|
|
+ .probe = bcm2711_thermal_probe,
|
|
+ .driver = {
|
|
+ .name = "bcm2711_thermal",
|
|
+ .of_match_table = bcm2711_thermal_id_table,
|
|
+ },
|
|
+};
|
|
+module_platform_driver(bcm2711_thermal_driver);
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Stefan Wahren");
|
|
+MODULE_DESCRIPTION("Broadcom AVS RO thermal sensor driver");
|