ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 07:22:33 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
4fd61b6220
openwrt/target/linux/brcm2708/patches-4.14/950-0115-ASoC-bcm2835-Add-support-for-TDM-modes.patch
Stijn Tintel f5919b65d4 brcm2708: add kernel 4.14 support 
Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-12-18 23:19:21 +02:00

403 lines
12 KiB
Diff
Raw Blame History

From c2b82810c0272bb29a9b426b017b196436957c76 Mon Sep 17 00:00:00 2001
From: Matthias Reichl <hias@horus.com>
Date: Sun, 7 May 2017 11:34:26 +0200
Subject: [PATCH 115/454] ASoC: bcm2835: Add support for TDM modes
bcm2835 supports arbitrary positioning of channel data within
a frame and thus is capable of supporting TDM modes. Since
the driver is limited to 2-channel operations only TDM setups
with exactly 2 active slots are supported.
Logical TDM slot numbering follows the usual convention:
For I2S-like modes, with a 50% duty-cycle frame clock,
slots 0, 2, ... are transmitted in the first half of a frame,
slots 1, 3, ... are transmitted in the second half.
For DSP modes slot numbering is ascending: 0, 1, 2, 3, ...
Channel position calculation has been refactored to use
TDM info and moved out of hw_params.
set_tdm_slot, set_bclk_ratio and hw_params now check more
strictly if the configuration is valid. Illegal configurations
like odd number of slots in I2S mode, data lengths exceeding
slot width or frame sizes larger than the hardware limit of
1024 are rejected. Also hw_params now properly checks for
errors from clk_set_rate.
Allowed PCM formats are already guarded by stream constraints,
thus the formats check in hw_params has been removed and
data_length is now retrieved via params_width().
Also standard functions like snd_soc_params_to_bclk are now
being used instead of manual calculations to make the code
more readable.
Special care has been taken to ensure that set_bclk_ratio works
as before. The bclk ratio is mapped to a 2-channel TDM config
with a slot width of half the ratio. In order to support odd ratios,
which can't be expressed via a TDM config, the ratio (frame length)
is stored and used by hw_params.
Signed-off-by: Matthias Reichl <hias@horus.com>
---
sound/soc/bcm/bcm2835-i2s.c | 243 ++++++++++++++++++++++++++++--------
1 file changed, 190 insertions(+), 53 deletions(-)
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -31,6 +31,7 @@
* General Public License for more details.
*/
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -99,6 +100,8 @@
#define BCM2835_I2S_CHWID(v) (v)
#define BCM2835_I2S_CH1(v) ((v) << 16)
#define BCM2835_I2S_CH2(v) (v)
+#define BCM2835_I2S_CH1_POS(v) BCM2835_I2S_CH1(BCM2835_I2S_CHPOS(v))
+#define BCM2835_I2S_CH2_POS(v) BCM2835_I2S_CH2(BCM2835_I2S_CHPOS(v))
#define BCM2835_I2S_TX_PANIC(v) ((v) << 24)
#define BCM2835_I2S_RX_PANIC(v) ((v) << 16)
@@ -110,12 +113,19 @@
#define BCM2835_I2S_INT_RXR BIT(1)
#define BCM2835_I2S_INT_TXW BIT(0)
+/* Frame length register is 10 bit, maximum length 1024 */
+#define BCM2835_I2S_MAX_FRAME_LENGTH 1024
+
/* General device struct */
struct bcm2835_i2s_dev {
struct device *dev;
struct snd_dmaengine_dai_dma_data dma_data[2];
unsigned int fmt;
- unsigned int bclk_ratio;
+ unsigned int tdm_slots;
+ unsigned int rx_mask;
+ unsigned int tx_mask;
+ unsigned int slot_width;
+ unsigned int frame_length;
struct regmap *i2s_regmap;
struct clk *clk;
@@ -225,19 +235,117 @@ static int bcm2835_i2s_set_dai_bclk_rati
unsigned int ratio)
{
struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- dev->bclk_ratio = ratio;
+
+ if (!ratio) {
+ dev->tdm_slots = 0;
+ return 0;
+ }
+
+ if (ratio > BCM2835_I2S_MAX_FRAME_LENGTH)
+ return -EINVAL;
+
+ dev->tdm_slots = 2;
+ dev->rx_mask = 0x03;
+ dev->tx_mask = 0x03;
+ dev->slot_width = ratio / 2;
+ dev->frame_length = ratio;
+
return 0;
}
+static int bcm2835_i2s_set_dai_tdm_slot(struct snd_soc_dai *dai,
+ unsigned int tx_mask, unsigned int rx_mask,
+ int slots, int width)
+{
+ struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+ if (slots) {
+ if (slots < 0 || width < 0)
+ return -EINVAL;
+
+ /* Limit masks to available slots */
+ rx_mask &= GENMASK(slots - 1, 0);
+ tx_mask &= GENMASK(slots - 1, 0);
+
+ /*
+ * The driver is limited to 2-channel setups.
+ * Check that exactly 2 bits are set in the masks.
+ */
+ if (hweight_long((unsigned long) rx_mask) != 2
+ || hweight_long((unsigned long) tx_mask) != 2)
+ return -EINVAL;
+
+ if (slots * width > BCM2835_I2S_MAX_FRAME_LENGTH)
+ return -EINVAL;
+ }
+
+ dev->tdm_slots = slots;
+
+ dev->rx_mask = rx_mask;
+ dev->tx_mask = tx_mask;
+ dev->slot_width = width;
+ dev->frame_length = slots * width;
+
+ return 0;
+}
+
+/*
+ * Convert logical slot number into physical slot number.
+ *
+ * If odd_offset is 0 sequential number is identical to logical number.
+ * This is used for DSP modes with slot numbering 0 1 2 3 ...
+ *
+ * Otherwise odd_offset defines the physical offset for odd numbered
+ * slots. This is used for I2S and left/right justified modes to
+ * translate from logical slot numbers 0 1 2 3 ... into physical slot
+ * numbers 0 2 ... 3 4 ...
+ */
+static int bcm2835_i2s_convert_slot(unsigned int slot, unsigned int odd_offset)
+{
+ if (!odd_offset)
+ return slot;
+
+ if (slot & 1)
+ return (slot >> 1) + odd_offset;
+
+ return slot >> 1;
+}
+
+/*
+ * Calculate channel position from mask and slot width.
+ *
+ * Mask must contain exactly 2 set bits.
+ * Lowest set bit is channel 1 position, highest set bit channel 2.
+ * The constant offset is added to both channel positions.
+ *
+ * If odd_offset is > 0 slot positions are translated to
+ * I2S-style TDM slot numbering ( 0 2 ... 3 4 ...) with odd
+ * logical slot numbers starting at physical slot odd_offset.
+ */
+static void bcm2835_i2s_calc_channel_pos(
+ unsigned int *ch1_pos, unsigned int *ch2_pos,
+ unsigned int mask, unsigned int width,
+ unsigned int bit_offset, unsigned int odd_offset)
+{
+ *ch1_pos = bcm2835_i2s_convert_slot((ffs(mask) - 1), odd_offset)
+ * width + bit_offset;
+ *ch2_pos = bcm2835_i2s_convert_slot((fls(mask) - 1), odd_offset)
+ * width + bit_offset;
+}
+
static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- unsigned int sampling_rate = params_rate(params);
- unsigned int data_length, data_delay, bclk_ratio;
- unsigned int ch1pos, ch2pos, mode, format;
+ unsigned int data_length, data_delay, framesync_length;
+ unsigned int slots, slot_width, odd_slot_offset;
+ int frame_length, bclk_rate;
+ unsigned int rx_mask, tx_mask;
+ unsigned int rx_ch1_pos, rx_ch2_pos, tx_ch1_pos, tx_ch2_pos;
+ unsigned int mode, format;
uint32_t csreg;
+ int ret = 0;
/*
* If a stream is already enabled,
@@ -248,39 +356,44 @@ static int bcm2835_i2s_hw_params(struct
if (csreg & (BCM2835_I2S_TXON | BCM2835_I2S_RXON))
return 0;
- /*
- * Adjust the data length according to the format.
- * We prefill the half frame length with an integer
- * divider of 2400 as explained at the clock settings.
- * Maybe it is overwritten there, if the Integer mode
- * does not apply.
- */
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- data_length = 16;
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- data_length = 24;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- data_length = 32;
- break;
- default:
- return -EINVAL;
+ data_length = params_width(params);
+ data_delay = 0;
+ odd_slot_offset = 0;
+ mode = 0;
+
+ if (dev->tdm_slots) {
+ slots = dev->tdm_slots;
+ slot_width = dev->slot_width;
+ frame_length = dev->frame_length;
+ rx_mask = dev->rx_mask;
+ tx_mask = dev->tx_mask;
+ bclk_rate = dev->frame_length * params_rate(params);
+ } else {
+ slots = 2;
+ slot_width = params_width(params);
+ rx_mask = 0x03;
+ tx_mask = 0x03;
+
+ frame_length = snd_soc_params_to_frame_size(params);
+ if (frame_length < 0)
+ return frame_length;
+
+ bclk_rate = snd_soc_params_to_bclk(params);
+ if (bclk_rate < 0)
+ return bclk_rate;
}
- /* If bclk_ratio already set, use that one. */
- if (dev->bclk_ratio)
- bclk_ratio = dev->bclk_ratio;
- else
- /* otherwise calculate a fitting block ratio */
- bclk_ratio = 2 * data_length;
+ /* Check if data fits into slots */
+ if (data_length > slot_width)
+ return -EINVAL;
/* Clock should only be set up here if CPU is clock master */
switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
case SND_SOC_DAIFMT_CBS_CFM:
- clk_set_rate(dev->clk, sampling_rate * bclk_ratio);
+ ret = clk_set_rate(dev->clk, bclk_rate);
+ if (ret)
+ return ret;
break;
default:
break;
@@ -294,9 +407,26 @@ static int bcm2835_i2s_hw_params(struct
format |= BCM2835_I2S_CHWID((data_length-8)&0xf);
+ /* CH2 format is the same as for CH1 */
+ format = BCM2835_I2S_CH1(format) | BCM2835_I2S_CH2(format);
+
switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
+ /* I2S mode needs an even number of slots */
+ if (slots & 1)
+ return -EINVAL;
+
+ /*
+ * Use I2S-style logical slot numbering: even slots
+ * are in first half of frame, odd slots in second half.
+ */
+ odd_slot_offset = slots >> 1;
+
+ /* MSB starts one cycle after frame start */
data_delay = 1;
+
+ /* Setup frame sync signal for 50% duty cycle */
+ framesync_length = frame_length / 2;
break;
default:
/*
@@ -307,19 +437,10 @@ static int bcm2835_i2s_hw_params(struct
return -EINVAL;
}
- ch1pos = data_delay;
- ch2pos = bclk_ratio / 2 + data_delay;
-
- switch (params_channels(params)) {
- case 2:
- case 8:
- format = BCM2835_I2S_CH1(format) | BCM2835_I2S_CH2(format);
- format |= BCM2835_I2S_CH1(BCM2835_I2S_CHPOS(ch1pos));
- format |= BCM2835_I2S_CH2(BCM2835_I2S_CHPOS(ch2pos));
- break;
- default:
- return -EINVAL;
- }
+ bcm2835_i2s_calc_channel_pos(&rx_ch1_pos, &rx_ch2_pos,
+ rx_mask, slot_width, data_delay, odd_slot_offset);
+ bcm2835_i2s_calc_channel_pos(&tx_ch1_pos, &tx_ch2_pos,
+ tx_mask, slot_width, data_delay, odd_slot_offset);
/*
* Set format for both streams.
@@ -327,11 +448,16 @@ static int bcm2835_i2s_hw_params(struct
* (and therefore word length) anyway,
* so the format will be the same.
*/
- regmap_write(dev->i2s_regmap, BCM2835_I2S_RXC_A_REG, format);
- regmap_write(dev->i2s_regmap, BCM2835_I2S_TXC_A_REG, format);
+ regmap_write(dev->i2s_regmap, BCM2835_I2S_RXC_A_REG,
+ format
+ | BCM2835_I2S_CH1_POS(rx_ch1_pos)
+ | BCM2835_I2S_CH2_POS(rx_ch2_pos));
+ regmap_write(dev->i2s_regmap, BCM2835_I2S_TXC_A_REG,
+ format
+ | BCM2835_I2S_CH1_POS(tx_ch1_pos)
+ | BCM2835_I2S_CH2_POS(tx_ch2_pos));
/* Setup the I2S mode */
- mode = 0;
if (data_length <= 16) {
/*
@@ -343,8 +469,8 @@ static int bcm2835_i2s_hw_params(struct
mode |= BCM2835_I2S_FTXP | BCM2835_I2S_FRXP;
}
- mode |= BCM2835_I2S_FLEN(bclk_ratio - 1);
- mode |= BCM2835_I2S_FSLEN(bclk_ratio / 2);
+ mode |= BCM2835_I2S_FLEN(frame_length - 1);
+ mode |= BCM2835_I2S_FSLEN(framesync_length);
/* Master or slave? */
switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -424,7 +550,20 @@ static int bcm2835_i2s_hw_params(struct
/* Clear FIFOs */
bcm2835_i2s_clear_fifos(dev, true, true);
- return 0;
+ dev_dbg(dev->dev,
+ "slots: %d width: %d rx mask: 0x%02x tx_mask: 0x%02x\n",
+ slots, slot_width, rx_mask, tx_mask);
+
+ dev_dbg(dev->dev, "frame len: %d sync len: %d data len: %d\n",
+ frame_length, framesync_length, data_length);
+
+ dev_dbg(dev->dev, "rx pos: %d,%d tx pos: %d,%d\n",
+ rx_ch1_pos, rx_ch2_pos, tx_ch1_pos, tx_ch2_pos);
+
+ dev_dbg(dev->dev, "sampling rate: %d bclk rate: %d\n",
+ params_rate(params), bclk_rate);
+
+ return ret;
}
static int bcm2835_i2s_prepare(struct snd_pcm_substream *substream,
@@ -560,6 +699,7 @@ static const struct snd_soc_dai_ops bcm2
.hw_params = bcm2835_i2s_hw_params,
.set_fmt = bcm2835_i2s_set_dai_fmt,
.set_bclk_ratio = bcm2835_i2s_set_dai_bclk_ratio,
+ .set_tdm_slot = bcm2835_i2s_set_dai_tdm_slot,
};
static int bcm2835_i2s_dai_probe(struct snd_soc_dai *dai)
@@ -700,9 +840,6 @@ static int bcm2835_i2s_probe(struct plat
dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].flags =
SND_DMAENGINE_PCM_DAI_FLAG_PACK;
- /* BCLK ratio - use default */
- dev->bclk_ratio = 0;
-
/* Store the pdev */
dev->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, dev);
Reference in New Issue View Git Blame Copy Permalink