ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 02:29:01 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
4eefdc7adb
openwrt/target/linux/realtek/dts-5.10
History
INAGAKI Hiroshi 7b19770525 realtek: add support for I-O DATA BSH-G24MB 
I-O DATA BSH-G24MB is a 24 port gigabit switch, based on RTL8382M.

Specification:

- SoC		: Realtek RTL8382M
- RAM		: DDR2 128 MiB (Nanya NT5TU128M8HE-AC)
- Flash		: SPI-NOR 16 MiB (Macronix MX25L12835FM2I-10G)
- Ethernet	: 10/100/1000 Mbps x24
  - port 1-8	: RTL8218B
  - port 9-16	: RTL8218B (SoC)
  - port 17-24	: RTL8218B
- LEDs/Keys	: 2x, 1x
- UART		: pin header on PCB
  - JP2: 3.3V, TX, RX, GND from rear side
  - 115200n8
- Power		: 100 VAC, 50/60 Hz
  - Plug	: IEC 60320-C13

Flash instruction using sysupgrade image:

1. Boot BSH-G24MB normally
2. Connect BSH-G24MB to the DHCP enabled network
3. Find the device's IP address and open the WebUI and login
   Note: by default, the device obtains IP address from DHCP server of
         the network
4. Open firmware update page ("ファームウェア アップデート")
5. Rename the OpenWrt sysupgrade image to "bsh-g24mb_v100.image" and
   select it
6. Press apply ("適用") button to perform update
7. Wait ~150 seconds to complete flashing

Note:

- BSH-G24MB has a power-related LED ("電源"), but it's not connected to
  the GPIO of the SoC or RTL8231 and cannot be controlled. Instead of
  it, use system status LED on other than running-state.

- "sys_loop" LED indicates system status and loop-detection status in
  stock firmware.

- BSH-G24MB has 2x os-image partitions named as "RUNTIME"/"RUNTIME2" in
  16 MiB SPI-NOR flash and the size of image per partition is only
  6848 KiB. The secondary image is never used on stock firmware, so also
  use it on OpenWrt to get more space.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2022-03-07 21:44:53 +01:00
..
rtl838x.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl839x.dtsi realtek: fix node addresses for RTL839x 2022-02-20 16:23:55 +00:00
rtl930x.dtsi realtek: use DT provided address for timers 2022-02-20 16:23:58 +00:00
rtl931x.dtsi realtek: consolidate bootargs again 2022-02-20 16:23:55 +00:00
rtl8380_netgear_gigabit_1xx.dtsi
rtl8380_netgear_gigabit_3xx.dtsi
rtl8380_netgear_gigabit.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8380_netgear_gs108t-v3.dts
rtl8380_netgear_gs110tpp-v1.dts realtek: netgear-gs110tpp: Add system LEDs 2021-12-27 13:51:41 +01:00
rtl8380_netgear_gs308t-v1.dts
rtl8380_netgear_gs310tp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-8.dts
rtl8380_zyxel_gs1900-8hp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-8hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-10hp.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_allnet_all-sg8208m.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_d-link_dgs-1210-10p.dts realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_d-link_dgs-1210-16.dts
rtl8382_d-link_dgs-1210-28.dts
rtl8382_d-link_dgs-1210.dtsi realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_inaba_aml2-17gp.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: add support for I-O DATA BSH-G24MB 2022-03-07 21:44:53 +01:00
rtl8382_zyxel_gs1900-24hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8393_zyxel_gs1900-48.dts realtek: ZyXEL GS1900-48: fix system LED polarity 2022-02-20 16:23:55 +00:00
rtl9302_zyxel_xgs1250-12.dts realtek: consolidate bootargs again 2022-02-20 16:23:55 +00:00