mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
f32085fc0b
Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
352 lines
7.9 KiB
C
352 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <dt-bindings/clock/en7523-clk.h>
|
|
|
|
#define REG_PCI_CONTROL 0x88
|
|
#define REG_PCI_CONTROL_PERSTOUT BIT(29)
|
|
#define REG_PCI_CONTROL_PERSTOUT1 BIT(26)
|
|
#define REG_PCI_CONTROL_REFCLK_EN1 BIT(22)
|
|
#define REG_GSW_CLK_DIV_SEL 0x1b4
|
|
#define REG_EMI_CLK_DIV_SEL 0x1b8
|
|
#define REG_BUS_CLK_DIV_SEL 0x1bc
|
|
#define REG_SPI_CLK_DIV_SEL 0x1c4
|
|
#define REG_SPI_CLK_FREQ_SEL 0x1c8
|
|
#define REG_NPU_CLK_DIV_SEL 0x1fc
|
|
#define REG_CRYPTO_CLKSRC 0x200
|
|
#define REG_RESET_CONTROL 0x834
|
|
#define REG_RESET_CONTROL_PCIEHB BIT(29)
|
|
#define REG_RESET_CONTROL_PCIE1 BIT(27)
|
|
#define REG_RESET_CONTROL_PCIE2 BIT(26)
|
|
|
|
struct en_clk_desc {
|
|
int id;
|
|
const char *name;
|
|
u32 base_reg;
|
|
u8 base_bits;
|
|
u8 base_shift;
|
|
union {
|
|
const unsigned int *base_values;
|
|
unsigned int base_value;
|
|
};
|
|
size_t n_base_values;
|
|
|
|
u16 div_reg;
|
|
u8 div_bits;
|
|
u8 div_shift;
|
|
u16 div_val0;
|
|
u8 div_step;
|
|
};
|
|
|
|
struct en_clk_gate {
|
|
void __iomem *base;
|
|
struct clk_hw hw;
|
|
};
|
|
|
|
static const u32 gsw_base[] = { 400000000, 500000000 };
|
|
static const u32 emi_base[] = { 333000000, 400000000 };
|
|
static const u32 bus_base[] = { 500000000, 540000000 };
|
|
static const u32 slic_base[] = { 100000000, 3125000 };
|
|
static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
|
|
|
|
static const struct en_clk_desc en7523_base_clks[] = {
|
|
{
|
|
.id = EN7523_CLK_GSW,
|
|
.name = "gsw",
|
|
|
|
.base_reg = REG_GSW_CLK_DIV_SEL,
|
|
.base_bits = 1,
|
|
.base_shift = 8,
|
|
.base_values = gsw_base,
|
|
.n_base_values = ARRAY_SIZE(gsw_base),
|
|
|
|
.div_bits = 3,
|
|
.div_shift = 0,
|
|
.div_step = 1,
|
|
}, {
|
|
.id = EN7523_CLK_EMI,
|
|
.name = "emi",
|
|
|
|
.base_reg = REG_EMI_CLK_DIV_SEL,
|
|
.base_bits = 1,
|
|
.base_shift = 8,
|
|
.base_values = emi_base,
|
|
.n_base_values = ARRAY_SIZE(emi_base),
|
|
|
|
.div_bits = 3,
|
|
.div_shift = 0,
|
|
.div_step = 1,
|
|
}, {
|
|
.id = EN7523_CLK_BUS,
|
|
.name = "bus",
|
|
|
|
.base_reg = REG_BUS_CLK_DIV_SEL,
|
|
.base_bits = 1,
|
|
.base_shift = 8,
|
|
.base_values = bus_base,
|
|
.n_base_values = ARRAY_SIZE(bus_base),
|
|
|
|
.div_bits = 3,
|
|
.div_shift = 0,
|
|
.div_step = 1,
|
|
}, {
|
|
.id = EN7523_CLK_SLIC,
|
|
.name = "slic",
|
|
|
|
.base_reg = REG_SPI_CLK_FREQ_SEL,
|
|
.base_bits = 1,
|
|
.base_shift = 0,
|
|
.base_values = slic_base,
|
|
.n_base_values = ARRAY_SIZE(slic_base),
|
|
|
|
.div_reg = REG_SPI_CLK_DIV_SEL,
|
|
.div_bits = 5,
|
|
.div_shift = 24,
|
|
.div_val0 = 20,
|
|
.div_step = 2,
|
|
}, {
|
|
.id = EN7523_CLK_SPI,
|
|
.name = "spi",
|
|
|
|
.base_reg = REG_SPI_CLK_DIV_SEL,
|
|
|
|
.base_value = 400000000,
|
|
|
|
.div_bits = 5,
|
|
.div_shift = 8,
|
|
.div_val0 = 40,
|
|
.div_step = 2,
|
|
}, {
|
|
.id = EN7523_CLK_NPU,
|
|
.name = "npu",
|
|
|
|
.base_reg = REG_NPU_CLK_DIV_SEL,
|
|
.base_bits = 2,
|
|
.base_shift = 8,
|
|
.base_values = npu_base,
|
|
.n_base_values = ARRAY_SIZE(npu_base),
|
|
|
|
.div_bits = 3,
|
|
.div_shift = 0,
|
|
.div_step = 1,
|
|
}, {
|
|
.id = EN7523_CLK_CRYPTO,
|
|
.name = "crypto",
|
|
|
|
.base_reg = REG_CRYPTO_CLKSRC,
|
|
.base_bits = 1,
|
|
.base_shift = 8,
|
|
.base_values = emi_base,
|
|
.n_base_values = ARRAY_SIZE(emi_base),
|
|
}
|
|
};
|
|
|
|
static const struct of_device_id of_match_clk_en7523[] = {
|
|
{ .compatible = "airoha,en7523-scu", },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static unsigned int en7523_get_base_rate(void __iomem *base, unsigned int i)
|
|
{
|
|
const struct en_clk_desc *desc = &en7523_base_clks[i];
|
|
u32 val;
|
|
|
|
if (!desc->base_bits)
|
|
return desc->base_value;
|
|
|
|
val = readl(base + desc->base_reg);
|
|
val >>= desc->base_shift;
|
|
val &= (1 << desc->base_bits) - 1;
|
|
|
|
if (val >= desc->n_base_values)
|
|
return 0;
|
|
|
|
return desc->base_values[val];
|
|
}
|
|
|
|
static u32 en7523_get_div(void __iomem *base, int i)
|
|
{
|
|
const struct en_clk_desc *desc = &en7523_base_clks[i];
|
|
u32 reg, val;
|
|
|
|
if (!desc->div_bits)
|
|
return 1;
|
|
|
|
reg = desc->div_reg ? desc->div_reg : desc->base_reg;
|
|
val = readl(base + reg);
|
|
val >>= desc->div_shift;
|
|
val &= (1 << desc->div_bits) - 1;
|
|
|
|
if (!val && desc->div_val0)
|
|
return desc->div_val0;
|
|
|
|
return (val + 1) * desc->div_step;
|
|
}
|
|
|
|
static int en7523_pci_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
|
|
|
|
return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
|
|
}
|
|
|
|
static int en7523_pci_prepare(struct clk_hw *hw)
|
|
{
|
|
struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
|
|
void __iomem *np_base = cg->base;
|
|
u32 val, mask;
|
|
|
|
/* Need to pull device low before reset */
|
|
val = readl(np_base + REG_PCI_CONTROL);
|
|
val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
|
|
writel(val, np_base + REG_PCI_CONTROL);
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Enable PCIe port 1 */
|
|
val |= REG_PCI_CONTROL_REFCLK_EN1;
|
|
writel(val, np_base + REG_PCI_CONTROL);
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Reset to default */
|
|
val = readl(np_base + REG_RESET_CONTROL);
|
|
mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
|
|
REG_RESET_CONTROL_PCIEHB;
|
|
writel(val & ~mask, np_base + REG_RESET_CONTROL);
|
|
usleep_range(1000, 2000);
|
|
writel(val | mask, np_base + REG_RESET_CONTROL);
|
|
msleep(100);
|
|
writel(val & ~mask, np_base + REG_RESET_CONTROL);
|
|
usleep_range(5000, 10000);
|
|
|
|
/* Release device */
|
|
mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
|
|
val = readl(np_base + REG_PCI_CONTROL);
|
|
writel(val & ~mask, np_base + REG_PCI_CONTROL);
|
|
usleep_range(1000, 2000);
|
|
writel(val | mask, np_base + REG_PCI_CONTROL);
|
|
msleep(250);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void en7523_pci_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
|
|
void __iomem *np_base = cg->base;
|
|
u32 val;
|
|
|
|
val = readl(np_base + REG_PCI_CONTROL);
|
|
val &= ~REG_PCI_CONTROL_REFCLK_EN1;
|
|
writel(val, np_base + REG_PCI_CONTROL);
|
|
}
|
|
|
|
static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
|
|
void __iomem *np_base)
|
|
{
|
|
static const struct clk_ops pcie_gate_ops = {
|
|
.is_enabled = en7523_pci_is_enabled,
|
|
.prepare = en7523_pci_prepare,
|
|
.unprepare = en7523_pci_unprepare,
|
|
};
|
|
struct clk_init_data init = {
|
|
.name = "pcie",
|
|
.ops = &pcie_gate_ops,
|
|
};
|
|
struct en_clk_gate *cg;
|
|
|
|
cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
|
|
if (!cg)
|
|
return NULL;
|
|
|
|
cg->base = np_base;
|
|
cg->hw.init = &init;
|
|
en7523_pci_unprepare(&cg->hw);
|
|
|
|
if (clk_hw_register(dev, &cg->hw))
|
|
return NULL;
|
|
|
|
return &cg->hw;
|
|
}
|
|
|
|
static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
|
|
void __iomem *base, void __iomem *np_base)
|
|
{
|
|
struct clk_hw *hw;
|
|
u32 rate;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
|
|
const struct en_clk_desc *desc = &en7523_base_clks[i];
|
|
|
|
rate = en7523_get_base_rate(base, i);
|
|
rate /= en7523_get_div(base, i);
|
|
|
|
hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
|
|
if (IS_ERR(hw)) {
|
|
pr_err("Failed to register clk %s: %ld\n",
|
|
desc->name, PTR_ERR(hw));
|
|
continue;
|
|
}
|
|
|
|
clk_data->hws[desc->id] = hw;
|
|
}
|
|
|
|
hw = en7523_register_pcie_clk(dev, np_base);
|
|
clk_data->hws[EN7523_CLK_PCIE] = hw;
|
|
|
|
clk_data->num = EN7523_NUM_CLOCKS;
|
|
}
|
|
|
|
static int en7523_clk_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct clk_hw_onecell_data *clk_data;
|
|
void __iomem *base, *np_base;
|
|
int r;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
np_base = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(np_base))
|
|
return PTR_ERR(np_base);
|
|
|
|
clk_data = devm_kzalloc(&pdev->dev,
|
|
struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
|
|
GFP_KERNEL);
|
|
if (!clk_data)
|
|
return -ENOMEM;
|
|
|
|
en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
|
|
|
|
r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
|
|
if (r)
|
|
dev_err(&pdev->dev,
|
|
"could not register clock provider: %s: %d\n",
|
|
pdev->name, r);
|
|
|
|
return r;
|
|
}
|
|
|
|
static struct platform_driver clk_en7523_drv = {
|
|
.probe = en7523_clk_probe,
|
|
.driver = {
|
|
.name = "clk-en7523",
|
|
.of_match_table = of_match_clk_en7523,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
|
|
static int __init clk_en7523_init(void)
|
|
{
|
|
return platform_driver_register(&clk_en7523_drv);
|
|
}
|
|
|
|
arch_initcall(clk_en7523_init);
|