Roger Pueyo Centelles 4edadfb997 ath79: add support for Ubiquiti NanoStation Loco M (XW) ... This commit adds support for the NanoStation Loco M2/M5 XW devices on the ath79 target (support was long ago available on ar71xx). Specifications: - AR9342 SoC @ 535 MHz - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - AR8032 switch - 2T2R 5 GHz radio, 22 dBm - 13 dBi built-in antenna - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via TFTP: - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device or on the PoE supply pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (backported from commit 633c4304ad) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2020-02-26 16:49:44 +01:00
..
01_leds	ath79: add support for Ubiquiti NanoStation Loco M (XW)	2020-02-26 16:49:44 +01:00
02_network	ath79: add support for Ubiquiti NanoStation Loco M (XW)	2020-02-26 16:49:44 +01:00
03_gpio_switches	ath79: add support for the TP-LINK CPE220 V3	2020-01-08 17:42:37 +01:00