openwrt/target/linux
Pawel Dembicki 4e46ae1f69 kirkwood: add support for NETGEAR ReadyNAS Duo v2
NETGEAR ReadyNAS Duo v2 is a NAS based on Marvell kirkwood SoC.

Specification:
 - Processor Marvell 88F6282 (1.6 GHz)
 - 256MB RAM
 - 128MB NAND
 - 1x GBE LAN port (PHY: Marvell 88E1318)
 - 1x USB 2.0
 - 2x USB 3.0
 - 2x SATA
 - 3x button
 - 5x leds
 - serial on J5 connector accessible from rear panel
   (115200 8N1) (VCC,TX,RX,GND) (3V3 LOGIC!)

Installation by USB + serial:
  - Copy initramfs image to fat32 usb drive
  - Connect pendrive to USB 2.0 front socket
  - Connect serial console
  - Stop booting in u-boot
  - Do:
	usb reset
        setenv bootargs 'console=ttyS0,115200n8 earlyprintk'
        setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000'
        saveenv
	fatload usb 0:1 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage
	bootm 0x1200000
  - copy sysupgrade image via ssh.
  - run sysupgrade

Installation by TFTP + serial:
  - Setup TFTP server and copy initramfs image
  - Connect serial console
  - Stop booting in u-boot
  - Do:
	setenv bootargs 'console=ttyS0,115200n8 earlyprintk'
	setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000'
	saveenv
	setenv serverip 192.168.1.1
	setenv ipaddr 192.168.1.2
	tftpboot 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage
	bootm 0x1200000
  - copy sysupgrade image via ssh.
  - run sysupgrade

Known issues:
  - Power button and PHY INTn pin are connected to the same GPIO. It
    causes that every network restart button is pressed in system.
    As workaround, button is used as regular BTN_1.

For more info please look at file:
RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c
from Netgear GPL sources.

Tested-by: Raylynn Knight <rayknight@me.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2021-12-29 20:35:57 +01:00
..
apm821xx kernel: bump 5.10 to 5.10.88 2021-12-27 16:00:21 +00:00
arc770 kernel: move two symbols to the generic kconfigs 2021-08-29 17:07:19 +02:00
archs38 kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
armvirt kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
at91 kernel: filter out both Clang and LLD versions 2021-12-17 16:16:34 +01:00
ath25 ath25: add kernel 5.10 support 2021-12-27 16:00:21 +00:00
ath79 ath79: remove pre-5.10 specific kernel code 2021-12-29 03:44:56 +01:00
bcm27xx kernel: bump 5.10 to 5.10.88 2021-12-27 16:00:21 +00:00
bcm47xx bcm47xx: switch to kernel 5.10 2021-11-08 15:56:39 +01:00
bcm53xx kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
bcm63xx kernel: filter out both Clang and LLD versions 2021-12-17 16:16:34 +01:00
bcm4908 bcm4908: include ATF in bootfs images 2021-12-24 23:07:39 +01:00
bmips kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
gemini kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
generic kernel: generic: backport linkstation-poweroff driver 2021-12-29 20:35:57 +01:00
imx kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
ipq40xx kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
ipq806x kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
ipq807x kernel: Set CONFIG_RCU_CPU_STALL_TIMEOUT=21 2021-09-09 20:24:12 +02:00
kirkwood kirkwood: add support for NETGEAR ReadyNAS Duo v2 2021-12-29 20:35:57 +01:00
lantiq kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
layerscape kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
malta kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
mediatek mediatek: yet again, replace patch with updated pending patch 2021-12-27 20:20:10 +00:00
mpc85xx kernel: bump 5.10 to 5.10.88 2021-12-27 16:00:21 +00:00
mvebu mvebu: puzzle: wan LED and fix default network 2021-12-23 20:17:47 +00:00
mxs kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
octeon kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
octeontx kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
omap kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
oxnas kernel: bump 5.10 to 5.10.85 2021-12-17 15:10:22 +01:00
pistachio kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
qoriq qoriq: add support for WatchGuard Firebox M300 2021-12-21 21:37:46 +02:00
ramips ramips: aw9523: add can_sleep flag for GPIO chip 2021-12-29 03:43:03 +01:00
realtek realtek: netgear-gs110tpp: Add system LEDs 2021-12-27 13:51:41 +01:00
rockchip rockchip: remove Kernel 5.4 2021-12-27 03:13:36 +01:00
sunxi sunxi: Use rtl8723bu-firmware instead of rtl8723bs-firmware 2021-12-27 00:58:29 +01:00
tegra kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
uml kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
x86 kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
zynq kernel: 5.10: consolidate mac80211 crypto options 2021-12-17 16:16:34 +01:00
Makefile target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00