ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-22 12:28:23 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
4e2b59b87a
openwrt/target/linux
History
Dan Brown 4e2b59b87a octeon: add new target and support for Ubiquiti EdgeRouter 6P 
Ubiquiti EdgeRouter 6P is 6 port router with similar
specifications as the EdgeRouter 4, support for which was added
in commit dd651e54cc

There are five 10/100/1000 Mbps RJ/Copper ports and
one 1000 Mbps SFP port.

SoC: Octeon Cavium 7130 (Cavium 3) at 1000MHz
Memory: 1GiB DDR3
Flash: 2x2M chips with uboots (chainloaded) + 512K eeprom
LEDs: 1x for power status (white/blue, controllable)
  and 6x for ethernet and SFP ports (no control over them)
Buttons: 1x Reset
Serial: 1x RJ45 port on front panel. 115200 baud, 8N1
USB: 1x USB3.0 on front panel
MII: 1x QSGMII from SoC
PHY: 1x Vitesse VSC8504 of which 4 ports are used (phys 4-7)
     1x Vitesse VSC8514 of which 2 ports are used (phys 8-9)

Network port mapping
 - eth0 on device maps to lan0 and phy5
 - eth1 on device maps to lan1 and phy6
 - eth2 on device maps to lan2 and phy7
 - eth3 on device maps to lan3 and phy8
 - eth4 on device maps to lan4 and phy9
 - eth5 (SFP) on device maps to lan5 and phy4

What is not working:
 - There is no port status available before it goes up
 - SFP have no additional status and presented as no different from eth
 - Power-over-ethernet (passive) support has not been tested

How to flash the firmware:
  - copy openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin and
    openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar to
    USB flash drive that is formatted to vfat/fat32
  - connect USB flash drive to EdgeRouter 6P front USB port
  - connect serial cable using front RJ45 port (115200 baud, 8N1)
  - connect power to cable to EdgeRouter 6P
  - connect terminal to the console to see uboot boot process
  - interrupt boot by pressing button(s) on your keyboard to log
    in to the uboot
  - detect usb connected flash drives by typing to the console:
    usb start
  - after drive is detected load initramfs+kernel to the memory by typing:
    fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin
  - after initramfs+kernel is loaded to the memory load it by typing:
    bootoctlinux 0 numcores=4 endbootargs mem=0
  - boot process should finish and you will be greeted with console
    after pressing enter
  - create directory to mount usb flash drive to by typing:
    mkdir /tmp/sda
  - mount flash drive to that directory by typing:
    mount /dev/sda1 /tmp/sda
  - flash firmware to router internal storage by typing:
    sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar
  - device will reboot and after it gets up you will have
    edgerouter 6p running openwrt

Signed-off-by: Dan Brown <danbrown@gmail.com>
[reorder/squash patches, move ethernet@0 to DTS, share image setup]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: maurerr <mariusd84@gmail.com>
2021-09-01 08:08:06 +00:00
..
apm821xx kernel: bump 5.10 to 5.10.36 2021-09-01 08:08:05 +00:00
arc770 treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
archs38 treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
armvirt treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
at91 treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
ath25 kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4 2021-09-01 08:08:02 +00:00
ath79 ath79: set lzma-loader variables to null by default 2021-09-01 08:08:06 +00:00
bcm27xx kernel: bump 5.4 to 5.4.115 2021-09-01 08:08:02 +00:00
bcm47xx bcm47xx: make WGT634U NVRAM patch apply again 2021-09-01 08:07:47 +00:00
bcm53xx treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
bcm63xx kernel: bump 5.10 to 5.10.37 2021-09-01 08:08:05 +00:00
bcm4908 treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
bmips kernel: bump 5.10 to 5.10.37 2021-09-01 08:08:05 +00:00
gemini treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
generic kernel: bump 5.10 to 5.10.37 2021-09-01 08:08:05 +00:00
imx6 treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
ipq40xx ipq40xx: fix hard_config partition size on MikroTik hAP-ac2 2021-09-01 08:08:04 +00:00
ipq806x kernel: bump 5.10 to 5.10.37 2021-09-01 08:08:05 +00:00
ipq807x treewide: remove redundant ubifs kconfig symbols 2021-09-01 08:08:01 +00:00
kirkwood kernel: fix parsing fixed subpartitions 2021-09-01 08:08:03 +00:00
lantiq kernel: bump 5.10 to 5.10.37 2021-09-01 08:08:05 +00:00
layerscape kernel: bump 5.4 to 5.4.114 2021-09-01 08:08:02 +00:00
malta treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
mediatek mediatek: reserve memory for ramoops and enable PSTORE 2021-09-01 08:08:04 +00:00
mpc85xx treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
mvebu kernel: fix parsing fixed subpartitions 2021-09-01 08:08:03 +00:00
mxs treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
octeon octeon: add new target and support for Ubiquiti EdgeRouter 6P 2021-09-01 08:08:06 +00:00
octeontx treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
omap treewide: remove redundant ubifs kconfig symbols 2021-09-01 08:08:01 +00:00
oxnas treewide: remove redundant ubifs kconfig symbols 2021-09-01 08:08:01 +00:00
pistachio treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
ramips ramips: fix SUPPORTED_DEVICES for ALFA Network devices 2021-09-01 08:08:06 +00:00
realtek realtek: Fix VLAN issues introduced by multicast patches 2021-09-01 08:08:05 +00:00
rockchip treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
sunxi kernel: bump 5.4 to 5.4.112 2021-09-01 08:08:00 +00:00
tegra kernel: Move CONFIG_USERIO to generic config 2021-09-01 08:07:53 +00:00
uml treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
x86 treewide: switch the timer frequency to 100 Hz 2021-09-01 08:08:01 +00:00
zynq kernel: Move CONFIG_USERIO to generic config 2021-09-01 08:07:53 +00:00
Makefile target: use SPDX license identifiers on Makefiles 2021-09-01 08:07:34 +00:00