mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
9703a2adcc
Refresh all patches on top of kernel 5.10.138. The following patches were applied upstream: bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more. bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch Fixes:89956c6532
("kernel: bump 5.10 to 5.10.138") Fixes:4209c33ae2
("kernel: bump 5.10 to 5.10.137") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
80 lines
3.0 KiB
Diff
80 lines
3.0 KiB
Diff
From fe77a92b9018f9a2dbab0e2a600e368d55c667b0 Mon Sep 17 00:00:00 2001
|
|
From: Maxime Ripard <maxime@cerno.tech>
|
|
Date: Tue, 13 Apr 2021 11:55:55 +0200
|
|
Subject: [PATCH] drm/vc4: hdmi: Convert to the new clock request API
|
|
|
|
The new clock request API allows us to increase the rate of the HSM
|
|
clock to match our pixel rate requirements while decreasing it when
|
|
we're done, resulting in a better power-efficiency.
|
|
|
|
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_hdmi.c | 22 +++++++++++++++-------
|
|
drivers/gpu/drm/vc4/vc4_hdmi.h | 3 +++
|
|
2 files changed, 18 insertions(+), 7 deletions(-)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
@@ -548,6 +548,9 @@ static void vc4_hdmi_encoder_post_crtc_p
|
|
HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
|
|
|
|
clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
|
|
+ clk_request_done(vc4_hdmi->bvb_req);
|
|
+ clk_disable_unprepare(vc4_hdmi->hsm_clock);
|
|
+ clk_request_done(vc4_hdmi->hsm_req);
|
|
clk_disable_unprepare(vc4_hdmi->pixel_clock);
|
|
|
|
ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
|
|
@@ -852,9 +855,9 @@ static void vc4_hdmi_encoder_pre_crtc_co
|
|
* pixel clock, but HSM ends up being the limiting factor.
|
|
*/
|
|
hsm_rate = max_t(unsigned long, 120000000, (pixel_rate / 100) * 101);
|
|
- ret = clk_set_min_rate(vc4_hdmi->hsm_clock, hsm_rate);
|
|
- if (ret) {
|
|
- DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);
|
|
+ vc4_hdmi->hsm_req = clk_request_start(vc4_hdmi->hsm_clock, hsm_rate);
|
|
+ if (IS_ERR(vc4_hdmi->hsm_req)) {
|
|
+ DRM_ERROR("Failed to set HSM clock rate: %ld\n", PTR_ERR(vc4_hdmi->hsm_req));
|
|
return;
|
|
}
|
|
|
|
@@ -866,10 +869,12 @@ static void vc4_hdmi_encoder_pre_crtc_co
|
|
* FIXME: When the pixel freq is 594MHz (4k60), this needs to be setup
|
|
* at 300MHz.
|
|
*/
|
|
- ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock,
|
|
- (hsm_rate > VC4_HSM_MID_CLOCK ? 150000000 : 75000000));
|
|
- if (ret) {
|
|
- DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
|
|
+ vc4_hdmi->bvb_req = clk_request_start(vc4_hdmi->pixel_bvb_clock,
|
|
+ (hsm_rate > VC4_HSM_MID_CLOCK ? 150000000 : 75000000));
|
|
+ if (IS_ERR(vc4_hdmi->bvb_req)) {
|
|
+ DRM_ERROR("Failed to set pixel bvb clock rate: %ld\n", PTR_ERR(vc4_hdmi->bvb_req));
|
|
+ clk_request_done(vc4_hdmi->hsm_req);
|
|
+ clk_disable_unprepare(vc4_hdmi->hsm_clock);
|
|
clk_disable_unprepare(vc4_hdmi->pixel_clock);
|
|
return;
|
|
}
|
|
@@ -877,6 +882,9 @@ static void vc4_hdmi_encoder_pre_crtc_co
|
|
ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret);
|
|
+ clk_request_done(vc4_hdmi->bvb_req);
|
|
+ clk_request_done(vc4_hdmi->hsm_req);
|
|
+ clk_disable_unprepare(vc4_hdmi->hsm_clock);
|
|
clk_disable_unprepare(vc4_hdmi->pixel_clock);
|
|
return;
|
|
}
|
|
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
|
|
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
|
|
@@ -172,6 +172,9 @@ struct vc4_hdmi {
|
|
|
|
struct reset_control *reset;
|
|
|
|
+ struct clk_request *bvb_req;
|
|
+ struct clk_request *hsm_req;
|
|
+
|
|
/* Common debugfs regset */
|
|
struct debugfs_regset32 hdmi_regset;
|
|
struct debugfs_regset32 hd_regset;
|