mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
286a456319
This PR adds support for a popular low-cost 2.4GHz N based AP
Specifications:
- SoC: Qualcomm Atheros QCA9533 (650MHz)
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 2.4GHz N based built into SoC 2x2
- Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Notes:
TP-Link does not use bootstrap registers so without this patch reference
clock detects as 40MHz while it is actually 25MHz.
This is due to messed up bootstrap resistor configuration on the PCB.
Provided GPL code just forces 25MHz reference clock.
That causes booting with completely wrong clocks, for example, CPU tries
to boot at 1040MHz while the stock is 650MHz.
So this PR depends on PR #672 to remove 40MHz reference clock.
Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 5c5bf8b865
)
2389 lines
56 KiB
Plaintext
2389 lines
56 KiB
Plaintext
config ATH79_MACH_A60
|
|
bool "OpenMesh A40/A60 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WI2A_AC200I
|
|
bool "Nokia WI2A-AC200i support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_ALFA_AP120C
|
|
bool "ALFA Network AP120C board support"
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP121F
|
|
bool "ALFA Network AP121F support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_AP96
|
|
bool "ALFA Network AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_HORNET_UB
|
|
bool "ALFA Network Hornet-UB board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_NX
|
|
bool "ALFA Network N2/N5 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TUBE2H
|
|
bool "ALFA Network Tube2H board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SC1750
|
|
bool "Abicom SC1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SC300M
|
|
bool "Abicom SC300M board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SC450
|
|
bool "Abicom SC450 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALL0258N
|
|
bool "Allnet ALL0258N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ALL0315N
|
|
bool "Allnet ALL0315N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ANTMINER_S1
|
|
bool "Bitmain Antminer S1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTMINER_S3
|
|
bool "Bitmain Antminer S3 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTROUTER_R1
|
|
bool "Bitmain Antrouter R1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARDUINO_YUN
|
|
bool "Arduino Yun"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP132
|
|
bool "Atheros AP132 reference board"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP143
|
|
bool "Atheros AP143 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_AP147
|
|
bool "Atheros AP147 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
|
|
config ATH79_MACH_AP152
|
|
bool "Atheros AP152 reference board"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
|
|
config ATH79_MACH_AP531B0
|
|
bool "Rockeetech AP531B0 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP90Q
|
|
bool "YunCore AP80Q/AP90Q support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP91_5G
|
|
bool "ALFA Network AP91-5G support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_AP96
|
|
bool "Atheros AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_PB42
|
|
bool "Atheros PB42 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_C55
|
|
bool "AirTight Networks C-55 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_C60
|
|
bool "AirTight Networks C-60 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_AW_NR580
|
|
bool "AzureWave AW-NR580 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_F9K1115V2
|
|
bool "Belkin AC1750DB board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EPG5000
|
|
bool "EnGenius EPG5000 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_ESR1750
|
|
bool "EnGenius ESR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_PQI_AIR_PEN
|
|
bool "PQI Air Pen"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SOM9331
|
|
bool "SOM9331 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SR3200
|
|
bool "YunCore SR3200 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_BHR_4GRV2
|
|
bool "Buffalo BHR-4GRV2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WHR_HP_G300N
|
|
bool "Buffalo WHR-HP-G300N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLAE_AG300N
|
|
bool "Buffalo WLAE-AG300N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLR8100
|
|
bool "Sitecom WLR-8100 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WZR_HP_AG300H
|
|
bool "Buffalo WZR-HP-AG300H board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH
|
|
bool "Buffalo WZR-HP-G300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select RTL8366_SMI
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH2
|
|
bool "Buffalo WZR-HP-G300NH2 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G450H
|
|
bool "Buffalo WZR-HP-G450H board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_450HP2
|
|
bool "Buffalo WZR-450HP2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WP543
|
|
bool "Compex WP543/WPJ543 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPE72
|
|
bool "Compex WPE72/WPE72NX board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPJ342
|
|
bool "Compex WPJ342 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ344
|
|
bool "Compex WPJ344 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ531
|
|
bool "Compex WPJ531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ558
|
|
bool "Compex WPJ558 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ563
|
|
bool "Compex WPJ563 board support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_XD3200
|
|
bool "YunCore XD3200 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DGL_5500_A1
|
|
bool "D-Link DGL-5500 A1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DHP_1565_A1
|
|
bool "D-Link DHP-1565 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_505_A1
|
|
bool "D-Link DIR-505-A1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_600_A1
|
|
bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_C1
|
|
bool "D-Link DIR-615 rev. C1 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_I1
|
|
bool "D-Link DIR-615 rev. I1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_825_B1
|
|
bool "D-Link DIR-825 rev. B1 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DIR_825_C1
|
|
bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_869_A1
|
|
bool "D-Link DIR-869 rev. A1"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DLAN_HOTSPOT
|
|
bool "devolo dLAN Hotspot support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DLAN_PRO_500_WP
|
|
bool "devolo dLAN pro 500 Wireless+ support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DLAN_PRO_1200_AC
|
|
bool "devolo dLAN pro 1200+ WiFi ac support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DOMYWIFI_DW33D
|
|
bool "DomyWifi DW33D support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DR342
|
|
bool "Wallys DR342 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DR344
|
|
bool "Wallys DR344 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DR531
|
|
bool "Wallys DR531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DRAGINO2
|
|
bool "DRAGINO V2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_E1700AC_V2
|
|
bool "Qxwlan E1700AC v2 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_E2100L
|
|
bool "Linksys E2100L board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_E600G_V2
|
|
bool "Qxwlan E600G/E600GAC v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ESR900
|
|
bool "EnGenius ESR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_EW_BALIN
|
|
bool "embedded wireless Balin Platform support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
|
|
config ATH79_MACH_EW_DORIN
|
|
bool "embedded wireless Dorin Platform support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
|
|
config ATH79_MACH_EL_M150
|
|
bool "EasyLink EL-M150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EL_MINI
|
|
bool "EasyLink EL-MINI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR150
|
|
bool "GL AR150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300
|
|
bool "GL_AR300 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300M
|
|
bool "GL_AR300M support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR750
|
|
bool "GL.iNet GL-AR750 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_DOMINO
|
|
bool "DOMINO support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_MIFI
|
|
bool "GL MIFI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_INET
|
|
bool "GL-INET support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_USB150
|
|
bool "GL.iNet GL-USB150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP120
|
|
bool "TP-LINK EAP120 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ENS202EXT
|
|
bool "EnGenius ENS202EXT support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP300V2
|
|
bool "EnGenius EAP300 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_OOLITE_V1
|
|
bool "GainStrong Oolite/Minibox V1.0 support"
|
|
select SOC_AR933X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_OOLITE_V5_2
|
|
bool "GainStrong Oolite V5.2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_HIVEAP_121
|
|
bool "Aerohive HiveAP-121 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_HIWIFI_HC6361
|
|
bool "HiWiFi HC6361 board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_JA76PF
|
|
bool "jjPlus JA76PF board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP003
|
|
bool "jjPlus JWAP003 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP230
|
|
bool "jjPlus JWAP230 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_KOALA
|
|
bool "OCEDO Koala board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WAM250
|
|
bool "Samsung WAM250 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WIFI_PINEAPPLE_NANO
|
|
bool "Hak5 WiFi Pineapple NANO support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WRT160NL
|
|
bool "Linksys WRT160NL board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_WRT400N
|
|
bool "Linksys WRT400N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WRTNODE2Q
|
|
bool "WRTnode2Q board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R36A
|
|
bool "ALFA Network R36A support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R602N
|
|
bool "P&W R602N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R6100
|
|
bool "NETGEAR R6100 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MC_MAC1200R
|
|
bool "MERCURY MAC1200R board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RB4XX
|
|
bool "MikroTik RouterBOARD 4xx series support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_RB750
|
|
bool "MikroTik RouterBOARD 750 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB91X
|
|
bool "MikroTik RouterBOARD 91X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB922
|
|
bool "MikroTik RouterBOARD 922 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
select RLE_DECOMPRESS
|
|
|
|
config ATH79_MACH_RB95X
|
|
bool "MikroTik RouterBOARD 95X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB2011
|
|
bool "MikroTik RouterBOARD 2011 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RBSPI
|
|
bool "MikroTik RouterBOARD SPI-NOR support"
|
|
select SOC_AR934X
|
|
select SOC_QCA953X
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
MikroTik ROuterBOARD 911-2Hn (911 Lite2)
|
|
MikroTik ROuterBOARD 911-5Hn (911 Lite5)
|
|
MikroTik RouterBOARD mAP
|
|
MikroTik RouterBOARD mAP lite
|
|
MikroTik RouterBOARD hAP lite
|
|
MikroTik RouterBOARD hAP
|
|
MikroTik RouterBOARD hAP ac
|
|
MikroTik RouterBOARD hAP ac lite
|
|
MikroTik RouterBOARD hEX PoE lite
|
|
MikroTik RouterBOARD hEX lite
|
|
MikroTik RouterBOARD Powerbox
|
|
MikroTik RouterBOARD LHG 5
|
|
MikroTik RouterBOARD cAP (EXPERIMENTAL)
|
|
MikroTik RouterBOARD wAP
|
|
|
|
config ATH79_MACH_RBSXTLITE
|
|
bool "MikroTik RouterBOARD SXT Lite"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_SMART_300
|
|
bool "NC-LINK SMART-300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_T830
|
|
bool "YunCore T830 support"
|
|
select SOC_QCA953X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TELLSTICK_ZNET_LITE
|
|
bool "TellStick ZNet Lite"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNDAP360
|
|
bool "NETGEAR WNDAP360 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNDR3700
|
|
bool "NETGEAR WNDR3700 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNDR4300
|
|
bool "NETGEAR WNDR3700v4/WNDR4300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000
|
|
bool "NETGEAR WNR2000 board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000_V3
|
|
bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNR2200
|
|
bool "NETGEAR WNR2200 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNR2000_V4
|
|
bool "NETGEAR WNR2000 V4"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM2P
|
|
bool "OpenMesh OM2P board support"
|
|
select SOC_AR724X
|
|
select SOC_AR933X
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P
|
|
bool "OpenMesh OM5P board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_AC
|
|
bool "OpenMesh OM5P-AC board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_ACv2
|
|
bool "OpenMesh OM5P-ACv2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_G1
|
|
bool "OMYlink OMY G1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_X1
|
|
bool "OMYlink OMY X1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ONION_OMEGA
|
|
bool "ONION OMEGA support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR12
|
|
bool "Meraki MR12 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR16
|
|
bool "Meraki MR16 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR18
|
|
bool "Meraki MR18 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_MR600
|
|
bool "OpenMesh MR600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W04NU
|
|
bool "Planex MZK-W04NU board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W300NH
|
|
bool "Planex MZK-W300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RE355
|
|
bool "TP-LINK RE355 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RE450
|
|
bool "TP-LINK RE450 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RME_EG200
|
|
bool "eTactica EG200 board supprt"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RUT9XX
|
|
bool "Teltonika RUT900 series support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select GPIO_PCA953X
|
|
|
|
config ATH79_MACH_RW2458N
|
|
bool "Redwave RW2458N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_CAP324
|
|
bool "PowerCloud CAP324 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CAP4200AG
|
|
bool "Senao CAP4200AG support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR3000
|
|
bool "PowerCloud CR3000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR5000
|
|
bool "PowerCloud CR5000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR1750
|
|
bool "OpenMesh MR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR900
|
|
bool "OpenMesh MR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP7660D
|
|
bool "Senao EAP7660D support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_BSB
|
|
bool "Smart Electronics Black Swift board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C25_V1
|
|
bool "TP-LINK Archer C25 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C58_V1
|
|
bool "TP-LINK Archer C58 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C59_V1
|
|
bool "TP-LINK Archer C59 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C60_V1
|
|
bool "TP-LINK Archer C60 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C60_V2
|
|
bool "TP-LINK Archer C60 v2 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C7
|
|
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
|
|
select SOC_QCA955X
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE505N
|
|
bool "P&W CPE505N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE510
|
|
bool "TP-LINK CPE510 support"
|
|
select SOC_AR934X
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE830
|
|
bool "YunCore CPE830 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE870
|
|
bool "YunCore CPE870 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR11U
|
|
bool "TP-LINK TL-MR11U/TL-MR3040 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR13U
|
|
bool "TP-LINK TL-MR13U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3020
|
|
bool "TP-LINK TL-MR3020 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3X20
|
|
bool "TP-LINK TL-MR3220/3420 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TL_MR6400
|
|
bool "TP-LINK TL-MR6400 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WAX50RE
|
|
bool "TP-LINK TL-WA750/850RE support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA701ND_V2
|
|
bool "TP-LINK TL-WA701ND v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA7210N_V2
|
|
bool "TP-LINK TL-WA7210N v2 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA801ND_V3
|
|
bool "TP-LINK TL-WA801ND v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA830RE_V2
|
|
bool "TP-LINK TL-WA830RE v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA850RE_V2
|
|
bool "TP-LINK TL-WA850RE v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA855RE_V1
|
|
bool "TP-LINK TL-WA855RE V1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND
|
|
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WA901ND_V2
|
|
bool "TP-LINK TL-WA901ND v2 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND_V4
|
|
bool "TP-LINK TL-WA901ND v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3320_V2
|
|
bool "TP-LINK TL-WDR3320 v2 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3500
|
|
bool "TP-LINK TL-WDR3500 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR4300
|
|
bool "TP-LINK TL-WDR3600/4300/4310 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR6500_V2
|
|
bool "TP-LINK TL-WDR6500 v2 board support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR703N
|
|
bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR720N_V3
|
|
bool "TP-LINK TL-WR720N v3/v4 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR741ND
|
|
bool "TP-LINK TL-WR741ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR741ND_V4
|
|
bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR802N_V1
|
|
bool "TP-LINK TL-WR802N v1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR802N_V2
|
|
bool "TP-LINK TL-WR802N v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR810N
|
|
bool "TP-LINK TL-WR810N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR810N_V2
|
|
bool "TP-LINK TL-WR810N v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR840N_V2
|
|
bool "TP-LINK TL-WR840N v2/v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V1
|
|
bool "TP-LINK TL-WR841N v1 support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR841N_V8
|
|
bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V9
|
|
bool "TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3/TL-WR740N/ND v6 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR902AC_V1
|
|
bool "TP-LINK TL-WR902AC v1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND
|
|
bool "TP-LINK TL-WR941ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND_V6
|
|
bool "TP-LINK TL-WR941ND v6 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR940N_V4
|
|
bool "TP-LINK TL-WR940N v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR942N_V1
|
|
bool "TP-LINK TL-WR942N v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TL_WR1041N_V2
|
|
bool "TP-LINK TL-WR1041N v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043N_V5
|
|
bool "TP-LINK TL-WR1043N v5 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND
|
|
bool "TP-LINK TL-WR1043ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND_V2
|
|
bool "TP-LINK TL-WR1043ND v2 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND_V4
|
|
bool "TP-LINK TL-WR1043ND v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR2543N
|
|
bool "TP-LINK TL-WR2543N/ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TS_D084
|
|
bool "PISEN TS-D084 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_632BRP
|
|
bool "TRENDnet TEW-632BRP support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_673GRU
|
|
bool "TRENDnet TEW-673GRU support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TEW_712BR
|
|
bool "TRENDnet TEW-712BR support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_732BR
|
|
bool "TRENDnet TEW-732BR support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_823DRU
|
|
bool "TRENDnet TEW-823DRU support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_UBNT
|
|
bool "Ubiquiti AR71xx based boards support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_UBNT_UNIFIAC
|
|
bool "Ubiquiti UniFi AC (LITE/LR/MESH/PRO) support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WEIO
|
|
bool "WeIO board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MYNET_N600
|
|
bool "WD My Net N600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_N750
|
|
bool "WD My Net N750 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_REXT
|
|
bool "WD My Net Wi-Fi Range Extender board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_Z1
|
|
bool "Meraki Z1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_ZBT_WE1526
|
|
bool "Zbtlink ZBT-WE1526 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ZCN_1523H
|
|
bool "Zcomax ZCN-1523H support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_N5Q
|
|
bool "ALFA Network N5Q support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_NBG460N
|
|
bool "Zyxel NBG460N/550N/550NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_NBG6716
|
|
bool "Zyxel NBG6616/NBG6716 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_CARAMBOLA2
|
|
bool "8devices Carambola2 board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_LAN_TURTLE
|
|
bool "Hak5 LAN Turtle and Packet Squirrel support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_LIMA
|
|
bool "8devices Lima board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
|
|
config ATH79_MACH_RAMBUTAN
|
|
bool "8devices Rambutan board"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E316N_V2
|
|
bool "COMFAST CF-E316N v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E320N_V2
|
|
bool "COMFAST CF-E320N v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E355AC
|
|
bool "COMFAST CF-E355AC v1/v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E375AC
|
|
bool "COMFAST CF-E375AC support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E380AC_V1
|
|
bool "COMFAST CF-E380AC v1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E380AC_V2
|
|
bool "COMFAST CF-E380AC v2 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E520N
|
|
bool "COMFAST CF-E520N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E530N
|
|
bool "COMFAST CF-E530N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_BHU_BXU2000N2_A
|
|
bool "BHU BXU2000n-2 rev. A support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_QIHOO_C301
|
|
bool "Qihoo 360 C301 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DAP_1330_A1
|
|
bool "D-Link DAP-1330 rev. A1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DAP_2695_A1
|
|
bool "D-Link DAP-2695 rev. A1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TL_WPA8630
|
|
bool "TP-Link TL-WPA8630 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_FRITZ300E
|
|
bool "AVM FRITZ!WLAN Repeater 300E support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_FRITZ4020
|
|
bool "AVM FRITZ!Box 4020 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_FRITZ450E
|
|
bool "AVM FRITZ!WLAN Repeater 450E support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|